TMTY1836 Mirror Installation and Care Guide

Hardware and Tools

Tools required: [drill], [hammer], [screwdriver]

Dimensions

The mirror has the following dimensions:

• Width: 450mm [17 11/16 inches]
• Height: 900mm [35 7/16 inches]
• Depth: 20mm [13/16 inches]

The distance of hook holes should be subject to physical measurement.

Installation Steps

1. Step 1

   Mark the desired positions for the mirror on the wall. Ensure the marks are level (horizontal) and vertical as needed.

2. Step 2

   Install the wall anchors (A) into the marked positions using a hammer or drill.

3. Step 3

   Attach the mounting brackets (B) to the wall using screws, ensuring they are securely fastened.

4. Step 4

   Hang the mirror onto the installed brackets. Ensure the mirror is securely attached in both horizontal and vertical orientations.

Care and Maintenance

1. The best and safest way to clean your mirror is by using warm water and a soft, lint-free cloth.
2. Wring water from the cloth before wiping the mirror to avoid excess moisture.
3. Keep bathrooms well ventilated.
4. Avoid using cleaners that contain ammonia or vinegar, as these can cause corrosion on the edges of the mirror. Never use abrasive cleaners.
5. If your mirror sits directly on a vanity, avoid having excess water puddle along the bottom of the mirror.
6. Avoid spraying cleaners directly onto the mirror.