ALIYIQI Measurement Instruments
AJL Water Pipe Leak Detector
The AJL Water Pipe Leak Detector is a specialized instrument designed for locating and confirming leaks in water pipe systems. It is also suitable for other pressurized pipe systems. When liquid escapes under pressure, it generates noise that travels along the pipe or through the ground. This instrument can pinpoint leak locations along the pipeline or on the surface above it.
Product Features
Water Leak Detector is a special instrument for searching and confirming the location of water pipe leak. It can also be used for other pressure pipe system. When the liquid in pipe overflows under pressure, noise can propagate along the pipe or spread to the ground through buried media, our instrument can confirm the location of leaks along the pipeline or above the ground surface.
Technical Parameters
| Model | 2000 | 3000 | Screen | Power |
|---|---|---|---|---|
| Frequency analysis bandwidth | 70~3000Hz, nearly 5 octave, two kinds of bandwidth | 70~4000Hz, nearly 5 octave, two kinds of bandwidth | 160 x 160 pixel, LCD display | Lithium battery, 7.4V 3000mAh, rechargeable |
| Frequency division (Center frequency) | a. 100 Hz b: 200 Hz c: 400 Hz d: 800 Hz e: 1K Hz f: 1.5K Hz g: 2K Hz |
a. 100 Hz b: 200 Hz c: 400 Hz d: 800 Hz e: 1K Hz f: 1.5K Hz g: 3K Hz |
||
| Bandwidth | a. Narrow band:symbol | | | b. Middle width:symbol | | | |
a. Narrow band:symbol | | | b. Middle width:symbol | | | |
||
| Value Display | Display as a bar (within 0-100) | Battery life | Working time after fully charged ≥ 35hours (Turn off backlight) | |
| Storage | Store 9 sets measuring value stored in 9 channels to check separately | |||
| Operation temperature | -10℃~+50℃ | |||
| Storage temperature | -10℃~+70℃ | |||
| Size of instrument | (L×W×D): 210×98×98mm | |||
| Weight | Main box (include battery):0.77 kg Cable-controlled components:0.24 kg Vibration pickup:0.28 kg Headset:0.35 kg Probe components:0.38 kg Aluminum case (include Main box and accessories):5.5 kg |
|||
DTF Yarn Tension Meter
The DTF series Yarn Tension Meter is an instrument applied in the textile industry. It can also be used to test small metal lines. Its characteristic feature is the pulley block principle, where the guide wheel utilizes precision bearings with minimal resistance, ensuring more accurate measurement results.
Technical Parameters
| Model | Range (gw) | Minimum scale value (gw) | accuracy |
|---|---|---|---|
| DTF-25 | 25~2~25 | 1 | ± 1° |
| DTF-50 | 50~4~50 | 2 | |
| DTF-75 | 75~5~75 | 5 | |
| DTF-100 | 100~10~100 | 5 | |
| DTF-150 | 150~10~150 | 5 | |
| DTF-250 | 250~20~250 | 10 |
ATG/ATN Tension Gauge
Tension meter relay connections are used for applying pressure, featuring electronic switches, micro-switches, valves, and springs. This equipment measures widening pressure, dial spindle pressure, and is used in automatic telephone equipment connections and pressure mechanical pressure armature, tape recorders, buffer pressure points, contact pressure, and other precision pressure and tension tests.
Technical Parameters
| Type | Max.measured value | Division value | Measuring range | G.W.(kg) |
|---|---|---|---|---|
| Units:N | ||||
| ATN-0.05 | 0.05 | 0.002 | 0.01-0.05-0.01 | |
| ATN-0.3 | 0.3N | 0.01N | 0.06-0.3-0.06N | |
| ATN-0.5 | 0.5N | 0.02N | 0.1-0.5-0.1N | |
| ATN-1 | 1N | 0.05N | 0.2-1-0.2N | |
| ATN-1.5 | 1.5N | 0.05N | 0.3-1.5-0.3N | |
| ATN-3 | 3N | 0.1N | 0.6-3.0-0.6N | |
| ATN-5 | 5N | 0.2N | 1-5-1N | 0.25kg |
| Units:G | ||||
| ATG-30 | 30g | 1g | 6-30-6g | |
| ATG-50 | 50g | 2g | 10-50-10g | |
| ATG-100 | 100g | 5g | 20-100-20g | |
| ATG-150 | 150g | 5g | 30-150-30g | |
| ATG-300 | 300g | 10g | 60-300-60g | |
| ATG-500 | 500g | 20g | 100-500-100g |
