Thule Kit 186118 Installation Guide

Kit Components and Specifications

Kit Number: 186118

Included Parts:

• Part 008 (x4)
• Part 081 (x4)
• Part 036 (x4)
• Spare Part 54201 (x4)

Maximum Load Capacity: 75 kg / 165 lbs

Maximum Speed: 130 km/h (80 Mph)

Recommended Torque: 4 Nm

Note: Maximum speed when driving on the right side of the road is 50 Mph (80 km/h).

Installation Steps

Step 1: Prepare the Foot

Attach the 'Evo' foot to the 'Kit' and 'Foot Pack' components as shown. Ensure the 'Edge' parts are correctly aligned.

Step 2: Mount to Vehicle

Place the assembled foot unit onto the vehicle's flush railing. Component 'A' should be positioned as indicated.

Step 3: Secure the Feet

Insert the 'B' components into the designated slots, ensuring all four feet are securely attached.

Step 4: Attach the Cover

Place the cover 'C' over the foot assembly and secure it. The cover should click into place.

Step 5: Final Tightening

Ensure the assembly is correctly positioned and tighten the bolts (x2) as per the instructions.

Important Safety Information:

• Always adhere to the specified torque settings (4 Nm).
• Observe the maximum load and speed limits.
• Ensure all parts are correctly installed before driving.
• Refer to the included 'Instructions' for detailed guidance.

Manufacturer Information

Thule Sweden AB, Borggatan 5, 335 73 Hillerstorp, SWEDEN

Website: www.thule.com

Email: info@thule.com

© Thule Group 2025. All rights reserved.

Part Number: 5561583002