Hompany SmartVac 13

Installing Desired Cleaning Accessory

Follow these steps to attach the desired cleaning accessory:

• Align the accessory with the main unit.
• Push until you hear a 'click'.
• Repeat for any additional connections as shown in the diagram.

Power Mode and Speed Switch

The SmartVac 13 features different power modes:

• The vacuum boots into "MID" Mode by default.
• Touch the "UP" Key to set the mode to "MAX".
• Touch the "UP" Key again to switch to "MIN" Mode.

The display shows the current mode: MIN, MID, MAX.

Recharging

You can recharge the vacuum in two ways:

The power display indicates the charging status:

• 30%: Charging, low charge
• 100%: Fully charged
• 60%: Charging, medium charge

Emptying the Dust Bin

Follow these steps to empty the dust bin:

1. Release the dust bin when the indicator reaches the MAX line.
2. Open the dust bin and empty its contents.
3. Close the dust bin securely.

Cleaning the Electric Floor Brush

Regularly clean the electric floor brush for optimal performance:

• Remove the brush from the floor head.
• Remove any tangled hair or debris.
• If necessary, wash the brush with cold water.
• Allow the brush to air dry completely for at least 24 hours before reassembling.

Dust Cup Cleaning

IMPORTANT! Wash filters with cold water at least every month. Ensure the filters are completely dry before refitting.

1. Remove the dust cup and its filter components.
2. Disassemble the filter components.
3. Wash the filters with cold water.
4. Allow the filters to air dry completely for at least 24 hours.
5. Reassemble the dust cup and filters once dry.

Removing the Dust Cup

To remove the dust cup, press the release button and pull the cup away from the main unit.

Prohibited Operations

• Do not use the SmartVac 13 near open flames.
• Do not store the SmartVac 13 near heat sources.
• Keep hands away from the brush bar when the vacuum is running.
• This vacuum is not designed for picking up liquids.
• Do not use it to pick up burning objects.