Introduction
This manual provides detailed instructions for assembling the AOXUN 10x12ft Single Top Wooden Frame Gazebo. Please review all sections before beginning assembly to ensure a smooth and successful setup.
Key Information
- Assembly Requirement: Two or more people are recommended for assembly.
- Tools Needed: Level, Rubber Mallet, Phillips Screw, Drill, Allen Key, Safety Hat, Gloves, Safety Goggles, Stepladder (6.5ft or more).
- Important Note: Do not fully tighten screws until assembly is complete. Ensure screws are aligned properly with holes.
Product Overview
AOXUN is a professional outdoor furniture provider dedicated to offering high-quality products with outstanding designs. This gazebo is designed to provide shelter from sunlight and rain, while its screens also help block flying insects, creating a comfortable outdoor living space.
Safety Precautions
- Avoid assembly in heavy winds or inclement weather.
- Do not use open flames or flammable chemicals near the gazebo.
- Handle parts with care, as some may have sharp edges.
- In case of missing or damaged parts, contact AOXUN for replacement parts before proceeding.
- Failure to follow assembly instructions may void the warranty.
- California Proposition 65 Warning: This product may expose users to Carbon monoxide, a substance known to the State of California to cause birth defects or other reproductive harm. For more information, visit www.P65Warnings.ca.gov.
Parts and Hardware
Refer to the detailed parts and hardware lists within this manual to identify all components before installation. This includes various wooden parts (labeled 01-22, A1-A2, B1-B2, C1-C2, D-D3, E-E1, F-F1, G-H, J-L, M-N1, R-R6) and hardware (labeled AA-MM).
Assembly Steps
The assembly process is divided into six parts:
- Precautions and Preparations (Pages 3-6)
- Material List (Pages 7-13)
- Part 3 Assembly (Pages 14-25)
- Part 4 Assembly (Pages 26-34)
- Part 5 Assembly (Pages 35-43)
- Help Center (Page 44)
P65Warnings.ca.gov
