Telescopic Screen CarPlay Manual

Specifications

Power Supply Voltage: 12~14.4V DC, Negative Ground

Max Current Consumption: 15A

Max Output Power: 4X60W

Key Features

• Telescopic Screen
• HD Display
• Stereo Radio
• Bluetooth & CarPlay
• Audio/Video/Picture Playback
• USB Support
• FLAC Audio Codec Support
• TF Card Support (Not supported by some models)
• Works with Apple CarPlay
• Works with Android Auto

Before Installation

Thank you for purchasing this product. Before installing, please test the unit with a 12V DC power supply. Connect the red and yellow wires together to the positive battery terminal and the black wire to the negative terminal. Press each button to ensure the unit boots normally. If it does not boot, re-check the connections or contact support.

Rear Interface Description

18P Power Plug:

• White/black striped: Front speaker (R)
• Gray/black striped: Rear speaker (R)
• Green/black striped: Rear speaker (R)
• Purple/black striped: Rear speaker (R)
• Black (Bold): Ground Wire / B-
• Yellow (Bold): BATTERY (Constant Power Supply +12V)
• Red: ACC (Ignition Switch)
• Orange: ILLUMINATION (Illuminate Backlight)
• Orange/black: BACK (Reversing camera control line)
• Brown: KEY1 (Steering Wheel Control 1)
• Brown/black: KEY2 (Steering Wheel Control 2)
• Black (light): KEY-GND (Steering Wheel Control ground)
• Blue: ANT (Auto Antenna Power)
• Pink: BRAKE (Parking brake cable)

Other Connections:

• Radio Antenna
• Left Audio Output
• Right Audio Output
• Video Output -1
• CVBS Input
• Reversing Camera Input
• Video Output -2

Important Notes:

• The unit turns on when both the yellow (B+) and red (ACC) wires have 12V power.
• The yellow wire (B+) maintains memory function.
• Ensure speaker cables are not grounded, shared, or touching each other to prevent sound issues.

Reversing Camera Installation Method

Connect the reversing camera to the 'Reverse Camera Input' and the corresponding power and video cables. Ensure the REVERSE/BACK cable is connected correctly to activate the reverse mode. If not installed, leave the cable unconnected to avoid issues.

Machine Fixed Reference Method

Insert the mounting sleeve into the dashboard. Bend the tabs outward for a secure fit. Use the provided strap to secure the back of the unit if necessary. To remove the unit, insert release keys into the sides and pull out.

Steering Wheel Controls

Wiring Method: Connect the positive and negative wires of the original car's steering wheel control buttons to the KEY lines on the machine's output.

Learning Method:

1. Press and hold the function key on the steering wheel, then tap the desired function on the car screen. A persistent highlight indicates successful learning. Repeat for other buttons. Confirm to complete.
2. For errors, press the reset button and re-learn.

Main Interface Functions

• 1. RADIO: Access radio mode.
• 2. USB: Play music/video/pictures from USB drive or connect phone via USB.
• 3. SD: Play music/video/pictures from Micro SD card.
• 4. BT Music: Access Bluetooth music interface.
• 5. BT Phone: Access Bluetooth call interface.
• 6. Phonelink: Use CarPlay / Android Auto via USB for screen mirroring.
• 7. AV IN: Access external audio input.
• 8. Settings: Access system settings.
• 9. Prev Track: Previous track in playback.
• 10. Play/Pause/Band Switch: Play/pause music or switch radio bands.
• 11. Next Track: Next track in playback.
• 12. Volume Adjust
• 13. Theme Color Switch
• 14. Brightness Switch
• 15. Voice Assistant: Activate mobile phone's voice assistant via Bluetooth.

Radio Function

• 1. : Manually search stations (0.05MHz steps). Long press P1-P6 to store.
• 2. BAND: Switch between FM1, FM2, FM3, AM1, AM2.
• 3. ◄►►►: Auto seek forward/backward stations.
• 4. PS: Auto search and store stations in all bands.
• 5. Manual Frequency Entry
• 6. Stored Station Area: Store up to 30 stations. Click to play.
• 7. Next Page
• 8. Sound Settings
• 9. Previous Page
• 10. PS: Auto browse stations for 5 seconds.
• 11. Stereo/Mono Switch
• 12. LOC/DX: Long-range/short-range broadcast selection.
• 13. RDS: RDS function settings (AF/TA/CT/PTY).