Cooler Master GLITE 430 Black
Product Overview
Top Panel Ports
The top panel features connectivity for Audio (microphone), USB 2.0, Power button, and Reset button. A diagram illustrates the top view of the case with these ports.
Cooling System Notes
The case supports various cooling configurations, including top airflow with or without top fans, and tower coolers with or without top fans.
Motherboard Installation Note
Important: Please remove PCI slots before installing the Motherboard.
Specifications
| Specification | Value |
|---|---|
| Dimensions | 440 x 190 x 474 mm (W x H x D) |
| Weight | 5.7 kg |
| Material | Steel, Plastic |
| Motherboard Support | ATX, Micro-ATX, Mini-ITX |
| 5.25" Drive Bays | 3 |
| 3.5" Drive Bays | 1 (convertible) |
| 2.5" Drive Bays | 1 (convertible) |
| Expansion Slots | 7 |
| Cooling System (Front) | 2 x 120mm (optional) |
| Cooling System (Rear) | 1 x 120mm (included) |
| Cooling System (Top) | 2 x 120mm (optional) |
| Cooling System (Bottom) | 1 x 120mm (optional) |
| Power Supply | Standard ATX PS2 / EPS 12V |
| Max PSU Length | 180mm |
| Max CPU Cooler Height | 166mm |
| Max GPU Length | 386mm |
Installation Guide
An icon indicates that a tool is required for assembly. Illustrations show devices for installation.
2.1 Remove Side Panel
To remove the side panel, typically you would unscrew the rear thumbscrews and slide the panel backward.
2.2 Install Power Supply
Mount the power supply unit (PSU) at the bottom rear of the case and secure it.
2.3 Install Motherboard
Before installing the motherboard, ensure any necessary PCI slots are removed. Align the motherboard with the standoffs in the case and secure it using screws, such as [M3x5 screw].
2.4 Install Add-on Cards
Install expansion cards, such as graphics cards or sound cards, into the appropriate slots on the motherboard. Secure the cards to the case chassis.
2.5 Install 5.25" and 3.5" Devices
2.5.1 Install 5.25" Device
Install 5.25-inch devices, like optical drives (ODD), into the front drive bays. These can be secured using tool-less mechanisms or screws.
2.5.2 Install 3.5" Device
Install 3.5-inch devices, such as hard disk drives (HDD), into the designated internal drive bays. A specific bracket may be used for HDD mounting.
2.6 Install Hard Disk Drive
Mount the hard disk drive (HDD) into the appropriate internal bay. Secure the drive using screws or the provided mounting system.
2.7 Install or Replace Case Fans
Install or replace case fans in the designated locations (front, rear, top, bottom) to optimize airflow within the case. Fans are typically secured with screws.
2.8 Clean the Filter
Locate and clean the dust filters, usually found at the front or bottom of the case, to maintain optimal airflow and reduce dust buildup.
2.9 Completing Installation
Finalize the installation by connecting all internal cables, ensuring all components are securely seated, and closing the side panels.
Warranty Information
Detailed warranty information is provided in multiple languages within the original document.
