V-TAC Wi-Fi Smart Switch Instruction Manual

Technical Data

Introduction & Warranty

Thank you for selecting and buying V-TAC product. V-TAC will serve you the best. Please read these instructions carefully before starting the installation and keep this manual handy for future reference. If you have any other query, please contact your dealer or local vendor from whom you have purchased the product. They are trained and ready to serve you at the best. The warranty is valid for 2 years from the date of purchase. The warranty does not apply to damage caused by incorrect installation or abnormal wear and tear. The company gives no warranty against damage to any surface due to incorrect removal and installation of the product. This product is warranted for manufacturing defects only.

For multi-language manuals, please scan the QR code.

French text regarding recycling: "Cet appareil, ses accessoires et cordons se recyclent. À DÉPOSER EN MAGASIN OU EN DÉCHÈTERIE. Points de collecte sur www.quefairedemesdechets.fr. Privilégiez la réparation ou le don de votre appareil!"

For any query/issue with the product, please reach out to support@v-tac.eu. For more product range, contact your distributor or nearest dealers.

V-TAC EUROPE LTD. Bulgaria, Plovdiv 4000, bul.L.Karavelow 9B

Warnings & Notes

Warnings:

1. Please make sure to turn off the power before starting the installation.
2. Installation must be performed by a qualified electrician.
3. When installing and using products, they must be far away from fire or high temperature objects.
4. For indoor use only.

Notes:

1. This device requires Wi-Fi Frequency 2.4Ghz.
2. Operating frequency (maximum transmitted power) 2.412-2.484Ghz.

Wi-Fi Module Safety Instructions

• Make sure that the input voltage of this product is as prescribed by the manufacturer. Other incoming voltages can cause the product to break down and potentially harm the environment and your health.
• The wires must be connected correctly and in accordance with the colors of the wire and the instructions given in the circuit diagram described in this instruction.
• Make sure before switching on that the power elements have a power lower than that specified by the manufacturer.
• Make sure before plugging in that the LED light voltage is suitable for configuration with this product.
• This product is suitable for products manufactured by V-TAC. When connected with products of other companies, V-TAC is not responsible for any adverse consequences for your health.
• The initial installation of the product must be done by a specialist with the relevant qualifications and skills.
• Before using this product, make sure that all parts are configured correctly according to the instructions in the attached instruction.
• The product should not be used by people under 5 years of age without supervision by a parent or guardian.

FCC Warning

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult an experienced radio/TV technician for help.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body.

[Safety Alert Symbol] This is the safety alert symbol. This symbol alerts you to potential hazards that could result in property damage and/or serious bodily harm or death.

[Caution: Risk of electric shock]

[Disposal Symbol] This marking indicates that this product should not be disposed of with other household wastes.

Wiring & Installation Instructions

• Make sure the power is OFF before starting the installation.
• Ensure that the wires are connected accurately according to the following diagram. (Input and output cannot be reversed)
• Install and power it up.

A. Direct Light Connection

Diagram Description: Mains power (Live and Neutral) connects to the device's L-in and N-in terminals respectively. The lamp connects to the device's L-out and N-out terminals. S1 and S2 terminals are not used in this configuration.

B. Light with 1-Way Switch Connection [1 Gang, SKU-23604]

Diagram Description: Mains power (Live and Neutral) connects to the device's L-in and N-in terminals. The switch is wired between the Mains Live and the device's L-in terminal. The lamp connects to the device's L-out terminal. The device's N-out terminal connects to the lamp's Neutral. S1 and S2 terminals are not used.

C. Light with 2-Way Switch Connection [2 Gang, SKU-23605]

Diagram Description: Mains power (Live and Neutral) connects to the device's L-in and N-in terminals. For the first gang, a wire from L-in connects to the input of Switch 1. The output of Switch 1 connects to the device's L1 terminal, which powers Lamp 1. For the second gang, a wire from L-in connects to the input of Switch 2. The output of Switch 2 connects to the device's L2 terminal, which powers Lamp 2. Mains Neutral connects to the device's N-in terminal. S1 and S2 terminals are not used.

App Installation Instructions (Smart Life)

1. Turn the power button ON of the device. Then follow the below instructions.
2. Scan the given QR code, or download "Smart Life" from the App Store (iOS) or the Google Play Store (Android).
3. Open the Smart Life app and tap on 'Register' to create a new account. If you already have an existing account, please proceed to logging in. (Refer to Fig 1 for app interface example).
4. Enable Bluetooth and Home Wi-Fi for the device to access your Wi-Fi connection for pairing.
5. Click "Add a device" or the "+" icon in the top right corner.
6. Select "Electrical" and then choose "Switch (Wi-Fi)".
7. Select your 2.4GHz Wi-Fi network and enter the password.
8. Click on "Confirm the indicator is blinking".

Device Pairing and Reset:

To Pair: Power ON the device. The buzzer should make a "DIDI" sound and the LED light should start blinking rapidly. If it does not, try the following reset methods:

• A) Long press the manual button for 5 seconds on the Wi-Fi module.
• B) Open and close the rocker switch six times (if connected to a switch).
• C) Turn the main power ON and OFF six times until the buzzer makes a "DIDI" sound or the LED light starts blinking rapidly.
• D) Follow the reset device step-by-step on the App.

After successful pairing (Step 8), the app will show a "Connecting Now" page (Fig 14) as it searches, registers, and initializes the device. Once completed, the device will be successfully paired (Fig 15).

You can then rename the device to your preference and tap "Completed" (Fig 15). You can now control your device via the app by tapping its name on the home page to access its controls and features (Fig 16).

Google Assistant Integration

Step 1: Setup

• Install the Google Assistant app via the App Store (iOS) or the Play Store (Android) and register. If you already have an existing account, proceed to logging in.
• Create a New Home or choose from an existing home.
• Power ON the Google Assistant device and connect it to the App.

Step 2: Add Device

• On the Google Home page, tap the Add "+" icon to add a new device and skill.
• Tap "Set up device".
• Ensure the Wi-Fi Switch is paired with the Smart Life app. Tap the arrow section as highlighted in the image.
• Type "Smart Life" on the search bar and tap on the "Smart Life" icon.
• Sign in with your Smart Life login credentials to link the device.
• Tap "Authorize" to proceed with linking.

Step 3: Link Account and Select Device

• Your account will now be linked. Stay on the page; you will be redirected to select the device to add to your home.
• Select the device and tap "Next".

Step 4: Assign Device to Home

• Select the Home where you want to add the Smart Life device, or create a new home.
• Your Smart Life device is now successfully added to your Google Assistant App.

Step 5: Control Device

• You can turn the Lamp On/OFF by tapping the On/Off options.
• Alternatively, tap the Smart Lamp to access controls for "Power and Dimming functionality".

Google Assistant Commands:

Example commands: "Ok Google, turn on/off bedroom light." "Ok Google, turn on/off Hall light." "Ok Google, set bedroom light to warm white."

Things to Remember Before Starting Installation (Google Assistant):

• Smart Life App & Google Assistant App.
• Ensure you have a Google Assistant Device.
• Smart Device - Lamp.
• Stable Wi-Fi network.

Amazon Alexa Integration

Step 1: Setup

• Install the Amazon Alexa app via the App Store (iOS) or the Play Store (Android) and register. If you already have an existing account, proceed to logging in.
• On the Amazon Alexa home page, tap the lower right icon (indicated by an arrow) to add a new device and skill.
• Tap settings, then "Skills & Games".
• Search for "Smart Life" on the "Skills & Games" page.

Step 2: Link Skill

• Enable the Skill.
• Enter your Smart Life login ID and password and tap "Link Now".
• Tap "Authorize" on the new page requesting authorization.
• You will receive confirmation that the account has been linked successfully.

Step 3: Discover Devices

• Discover your smart device on Alexa. Once the skill is enabled, you can use the voice command "Alexa discover devices" to your Alexa device.
• Alternatively, to add a device manually, tap the "Add Device" icon on the home page, select the device you are adding, and tap "Discover device".

Note: Discovering the device must be done every time the device's name is changed on the app.

Alexa Commands:

Example commands: "Alexa, turn on/off bedroom light." "Alexa, turn on/off Hall light."

Things to Remember Before Starting Installation (Alexa):

• Smart Life App & Amazon Alexa App.
• Ensure you have an Amazon Alexa Device (e.g., Echo, Echo Tap, or Echo Dot).
• Smart Device - Lamp.
• Stable Wi-Fi network.

Simplified EU Declaration of Conformity

V-TAC declares that this radio equipment type VT-5101 & VT-5102 Wi-Fi Smart Switch is in compliance with Directive 2014/53/EU.

The full text of the EU declaration of conformity is available at: https://www.vtacexports.com/media/ftp-upload/certificates/DOC/EU/VT-5101-DOC-WIFI%20SMART%20SWITCH-EU.pdf

Certifications: RoHS, CE, UKCA, PAP.