Outdoor Tech Kodiak 2.0 Portable Rugged Power Bank
Important Safety Warning
Use only a UL certified adapter when recharging the Kodiak USB Power Bank. The use of a USB to AC adapter that is not UL certified can cause high voltage and a spike in AC current, which in turn could cause the Power Bank, the adapter, or both to explode or catch on fire. To verify that the UL mark on the adapter has been certified by UL, visit: UL Certification Database.
Welcome
Congratulations on purchasing the Outdoor Tech Kodiak 2.0 Portable Powerbank. This manual will guide you through its features and proper usage to enhance your experience.
Product Anatomy
The Kodiak 2.0 features the following components:
- Micro USB Charge Port: For recharging the power bank.
- Flashlight Button (FL): Controls the built-in flashlight.
- Battery Level Indicator Button: Press to check remaining battery.
- 1 AMP USB Output Port: For charging smaller devices like smartphones.
- 2.4 AMP USB Output Port: For charging larger devices like tablets.
- Power Seal: Ensures water and dust resistance when closed.
- Flashlight: Integrated LED flashlight.
- Battery Level Indicator: LED lights showing remaining battery life.
Powering Up (Charging the Power Bank)
To charge the Kodiak 2.0:
- Connect the included micro USB cable to the Micro USB Charge Port on the power bank.
- Connect the other end of the cable to a USB power source, such as a computer or a 5V/2A USB power adapter.
- The Red LED lights will flash while charging. All Red LED lights will turn off when charging is complete.
Battery Level Indicator:
| Battery Level Lights | Battery Level |
|---|---|
| ● ● ● ● ● | Fully Charged |
| ● ● ● ● | 80% Remaining |
| ● ● ● | 60% Remaining |
| ● ● | 40% Remaining |
| ● | 20% Remaining |
| (Flashing) | Less than 5% Remaining* |
Charging Your Devices
To charge your devices using the Kodiak 2.0:
- Connect a USB cable to one of the Kodiak 2.0's output ports.
- Connect the other end of the cable to your device.
- Press the power button for approximately 1 second. The LED battery indicator will show the current battery level of the Kodiak 2.0.
- When your device is fully charged, disconnect it from the Kodiak 2.0.
The Kodiak 2.0 features two USB output ports with different amp ratings:
- 1 AMP out USB Port: Ideal for charging smartphones, iPods, and other small devices.
- 2.4 AMP out USB Port: Suitable for charging larger devices such as tablets and iPads.
This design allows for simultaneous charging of multiple devices.
Features: Durability
Waterproof & Shock Proof
The Kodiak 2.0 is designed to withstand water and impacts, making it suitable for outdoor adventures. [?] [?]
Power Seal
Ensure the power seal is fully depressed around all edges before exposing the device to elements to maintain its protective integrity.
Integrated Flashlight
The Kodiak 2.0 includes a built-in flashlight with three settings:
- Low Beam
- High Beam
- Strobe
Operation:
- Double-tap the Flashlight (FL) Button to turn on the flashlight to Low Beam.
- Press the FL button once for High Beam.
- Press the FL button again for Strobe mode.
- Press the FL button one final time to turn the flashlight off. [?]
Care & Maintenance
Follow these guidelines to ensure the longevity and performance of your Kodiak 2.0:
- Do not connect input and output simultaneously, as this may affect performance and charging.
- When not in use, ensure the lid is tightly closed and keep the device away from extreme heat conditions.
- Avoid exposing the Kodiak 2.0 to direct sunlight or hot places, as high temperatures can degrade electronic components, damage the battery, or distort plastic parts.
- Clean the surface with a soft, dry cloth. Do not use intensive chemical products or detergents.
- Charge the product at least once every three months to prevent the internal batteries from drying out.
- For optimal performance, fully charge the Kodiak 2.0 before charging other devices.
- Do not attempt to disassemble the Kodiak 2.0.
- Avoid scratching the surface with sharp objects.
- It is normal for the battery to generate some heat during charging. The temperature should remain below 45°C (113°F) and should not affect the product's performance.
- All products undergo strict quality inspection. Do not use the battery if it emits an odor, generates excessive heat, becomes deformed, shows signs of abrasion, is damaged, or appears abnormal in any way. [?️]
Specifications
- Battery Type: High Quality Lithium Polymer Battery
- Capacity: 6,000 mAh / 22.2Wh
- Charging Time: 5 hours
- Transfer Efficiency: 80%
- Input Voltage: 5V DC
- Output Voltage: 5V DC
- Input Current: 2 A
- Output Current: 1 A & 2.4 A
- Operating Temperature: -4°F to 140°F (-20°C to 60°C)
- Lumens: 65-100 lumens [?]
Connect With Us
Stay connected with Outdoor Tech:
- Website: www.outdoortechnology.com
- Facebook: facebook.com/outdoortechnology
- Twitter & Instagram: @outdoortech
For questions, comments, complaints, or just to say hello, email us at: info@outdoortechnology.com
