Omada RJ45 SFP+ Module
Datasheet SM5310-T
Model: SM5310-T
Product: 10G BASE-T RJ45 SFP+ Module
A compact, metallic SFP+ module with an RJ45 connector. The module features the TP-Link logo and various compliance markings, including CE and FCC logos, and 'MADE IN CHINA'.
Highlights
- Support 10GBASE-T, 5GBASE-T, 2.5GBASE-T, and 1000BASE-T*
- Transmit data up to 30m** at 10 Gbps (UTP cat.6a or above)
- Support DDM (Temperature and Voltage)
- Hot-Pluggable SFP+ Footprint Features
- Support TX Disable function
- Fully Metallic Enclosure for Low EMI
Overview
SM5310-T is a high-speed SFP+ module that converts SFP+ ports to RJ45 ports, supporting multi-rate Ethernet speeds up to 10 Gbps over distances of up to 30 meters with UTP Cat6a or higher cables. Compliant with SFP+ MSA standards, it ensures broad compatibility with a wide range of network devices.
Featuring Digital Diagnostic Monitoring (DDM) as per the SFF-8472 standard, this module enables real-time monitoring of key parameters, enhancing network reliability and performance. Ideal for diverse business networking scenarios, SM5310-T is a top choice for high-speed data transmission in switches, gateways, and other SFP+ port-equipped network equipment.
Specifications
Hardware Features & Performance
| Model | SM5310-T |
|---|---|
| Standards | IEEE 802.3, IEEE 802.3ab, IEEE 802.3bz, IEEE 802.3an, SFF-8472, SFF-8431 |
| Data Rate | 10.3125 Gbps |
| MAC Interface | 2.5/5/10 Gbps: XFI 1000 Mbps: 1000BASE-X |
| Power Input | 3.3V |
| Maximum Power Consumption | 2.442 W @ 10000 Mbps Full Duplex |
| Cable Distance | 1000BASE-T/2.5GBASE-T/5GBASE-T: UTP Cat. 5e or above (max. 100m) 10GBASE-T: UTP Cat. 6a or above (max. 30m) |
| Tx Output Impedance | 100 Ω |
| Rx Input Impedance | 100 Ω |
| Input Swing | 100-1500 mVpp |
| Output Swing | 100-2000 mVpp |
| TX_Disable | Yes |
| Hot Swappable | Yes |
| DDM | Yes (temperature and voltage) |
| Dimensions | 2.7*0.5*0.5 in (67.4*13.4*13.8 mm) |
| Operating Temperature | 0 – 70 °C (32 – 158 °F) |
| Storage Temperature | -40 – 85 °C (-40 – 185 °F) |
| Operating Humidity | 10% to 90% RH non-condensing |
| Storage Humidity | 5% to 90% RH non-condensing |
*When a 10G RJ45 SFP+ module is used at 1 Gbps, extra configuration for port data rate may be required. And when it is inserted into a 10 Gbps SFP+ slot and the maximum rate of the peer connection port is 5 Gbps or 2.5 Gbps, the flow control for the 10 Gbps SFP+ slot needs to be manually enabled.
**Data measured in a laboratory environment under specific conditions. The actual transmission distance may vary due to transmission speed or the cable quality and type.
Some models featured in this guide may be unavailable in your country or region. Visit the Omada by TP-Link website for local sales information: https://www.omadanetworks.com. Specifications are subject to change without notice.
© 2025 TP-Link
