VIOFO A119 MINI 2 USER MANUAL

Product Overview

Standard Items

The following items are included in the package:

• VIOFO A119 MINI 2 dashcam unit with GPS mount
• Car Charger Adapter
• USB Type-C Data Cable
• Trim Removal Tool
• Spare Mount Sticky Pads
• Two Windshield Static Stickers

Note: The USB data cable is for connecting the camera to a computer to transfer video files or upgrade firmware, not for charging the camera.

Optional Accessories

Optional accessories available for purchase include:

• CPL Filter
• Bluetooth Remote Control
• VIOFO Hardwire Kit HK4
• MicroSD Card

Product Diagram

The VIOFO A119 MINI 2 features the following components:

• Front View: Lens (15), Microphone Status Indicator (11), Recording Status Indicator (10), Power Status Indicator (9), Wi-Fi Status Indicator (12), Buttons: Menu/Power (1), Menu Up/Record (2), Menu Confirm/Lock (3), Menu Down/Mic (4), Wi-Fi (5).
• Side/Bottom View: USB Power Port (13), Memory Card Slot (7), Power in / MicroSD Card Reader Mode (6), Reset Button (8).
• Top View: Mount (GPS Module) (14).

LED Indicators

Buttons and Icons

Button functions vary depending on the mode:

Recording Mode

Standby Mode (Not Recording)

Playlist Mode

Setting Menu Mode

Display Overview

The dashcam display shows various indicators:

• Recording Mode icon
• Recording Status icon (REC LED)
• Emergency Lock icon ( ! )
• Microphone status icon (MIC LED)
• Wi-Fi Status icon (Wi-Fi LED)
• Recording Time (e.g., 00:00:00)
• Video Resolution (e.g., 1440P30)
• Date and Time (e.g., 04-06-2023 10:05:00)
• GPS Status icon
• SD Card status icon

Installation

Insert / Remove the Memory Card

Insert the memory card: Ensure the camera is turned off. Hold the memory card in the orientation shown and slide it into the card slot until you hear a click.

Remove the memory card: Ensure the camera is turned off. Push the edge of the memory card with your fingernail; the card will spring out enough to be removed.

Note:

• The microSD card is sold separately and must be Class-10 or UHS-I rated, with a capacity up to 512GB.
• VIOFO brand memory cards are recommended for durability and reliability.
• Format the card before first use (exFAT or FAT32 file system) on a computer or in the camera.
• Always turn off the A119 Mini 2 before inserting or removing the microSD card to prevent file corruption.

Install the Dashcam

1. Select a location on the windshield behind the rearview mirror that does not obstruct the driver's view.
2. Wipe the windshield surface clean and ensure it is grease-free for the sticky pad to adhere properly.
3. Mount the dashcam directly to the windshield using the sticky pad, or attach the static sticker to the selected location first.
4. Peel the protection film off the sticky pad and the camera lens.
5. Fix the camera securely in the chosen location.
6. Adjust the Lens Angle by looking at the live view on the LCD and tilting the lens up or down as needed.

Connect to Power

Insert the car charger USB cable's male port into the camera mount's USB Type-C port (?). Plug the USB power adapter into your vehicle's 12V / 24V female power socket.

Note: Do not install the camera or cables near an airbag panel or within its working range, as the manufacturer is not liable for injuries caused by airbag deployment.

Install the Static Sticker (Optional)

1. Wipe clean the windshield surface.
2. Peel the red protective film off the static sticker and attach it to the windshield, pressing to remove bubbles.
3. Peel the green protective film off the static sticker.
4. Peel the protection film off the mount's sticky pad and attach it firmly to the static sticker.

Installation Tips:

• Avoid locations that interfere with driver visibility or safety.
• Mount close to the rearview mirror for balanced scene coverage.
• Position the lens within the windshield wiper's sweeping range for clear views on rainy days.
• Do not mount near airbag panels.
• Ensure the mounting location is not affected by window tint and is free from other electronic equipment that could cause interference.

Dash Cam Recording Operation

Power On / Off

• The camera turns on and begins recording automatically when the engine starts.
• It stops recording and turns off when the engine is turned off or the charging cable is unplugged.
• Long press the ☰ button to manually power the camera on or off.

Loop Recording

• Automatic loop recording begins once a microSD card is inserted and power is detected.
• Video file time frames can be set to 1, 2, 3, 5, or 10 minutes.
• When storage is insufficient, loop recording automatically overwrites the oldest files.
• Loop recording files are saved to the SD card in the path: \DCIM\Movie.

Emergency Recording

• Automatic emergency recording: The G-sensor detects collisions, automatically locking the current footage to prevent it from being overwritten by loop recording.
• Manual emergency recording: Press the ▶ ! button during recording to lock the current file.

Note: G-sensor sensitivity can be adjusted in settings. Locked files are saved to DCIM\Movie\RO.

Disable / Enable Audio Recording

Press the ▸ MIC button once to turn audio recording on or off. The MIC LED will be off or solid blue accordingly.

Parking Mode

There are three parking mode options:

• Auto Event Detection: Records a video sequence when a moving object is detected and stops when no new movement is detected.
• Time Lapse Recording: Records video at low frame rates (1/2/3/5/10 fps) continuously without audio.
• Low Bitrate Recording: Uses a low bitrate for video and audio, creating small file sizes for continuous recording.

Note: Parking mode requires the engine to be off and the USB Type-C Hardwire Kit for continuous power and car battery protection. The VIOFO HK4 ACC hardwire kit is recommended.

Playback and Manage Videos

Playback Video on Dashcam

1. In standby mode (not recording), click the ▶ ! button to enter the playlist.
2. Use the arrow buttons (◀ REC, ▸ MIC) to select a video and press the ▶ ! button to play.
3. Press the ☰ button to exit.

Note: The default video resolution is 2560 x 1440P 30fps.

Playback Video on VIOFO APP

Long press the Wi-Fi button (☁) to enable Wi-Fi. Connect your phone to the dashcam's Wi-Fi network. Open the VIOFO app and select "Connect your camera" to control the dashcam, play, and manage files. Refer to the "Review and Control on Smartphone" section for details.

Playback Video on PC

1. Remove the memory card from the dashcam after turning it off.
2. Insert the memory card into an SD card adapter or card reader connected to your PC.
3. Open the DCIM folder using a video player (like VLC) to playback the video.

Note: If your PC has a microSD slot, you can insert the memory card directly.

Video File Storage Location

Review and Control on Smartphone

Connect to Smartphone

The VIOFO app allows remote control of your camera, including full camera control, live preview, playback, and video recording.

• Android Device: Download the app from Google Play or the APK from the official website: https://viofo.com/en/content/13-app/.
• iOS Device: Download the app from the App Store.

Connect VIOFO APP

Turn on Wi-Fi via the menu or by long pressing the ☁ Wi-Fi button. The Wi-Fi status icon, network name (SSID), and password will appear on the camera's LCD screen.

• Step 1: Connect your phone to the A119 Mini 2 Wi-Fi. The camera's LED will show solid blue when connected.
• Step 2: Open the VIOFO app and select "Connect your camera".
• Step 3: View the live feed from both cameras, change settings, and check files via the app.

APP Layout Overview

The VIOFO app interface provides access to various functions:

• Main Menu: 1 - Menu, 2 - Home Page, 3 - Downloaded Video, 4 - VIOFO Official Facebook Page, 5 - Official Support, 6 - Firmware Update, 7 - VPN connection.
• Live View / Controls: 1 - Live Video, 2 - Audio Recording Status, 3 - Switch Camera Video Source (Not Applicable), 4 - Take a Video Snapshot, 5 - Go to Video File Lists, 6 - Start / Stop Recording, 7 - Go to System Settings.
• Preview Video: 8 - Video File Lists, 9 - Download Video Files, 10 - Delete Video Files.

Install Optional Accessories

Install CPL

The CPL (Circular Polarizing Lens) filter reduces reflections and glare from the windshield and road surfaces, improving image quality and saturation, similar to polarized sunglasses.

To install, choose a slot on the lens assembly, keep it upward, and then place the CPL filter onto the lens.

Install Bluetooth Remote Control

Mount the optional Bluetooth remote control on your dashboard for easy access. Pressing the remote's video lock button will lock the current video file and take a video snapshot, allowing you to protect important footage without taking your eyes off the road.

Pairing with dash camera:

• Power on the camera.
• Press and hold the video lock button on the remote for 3 seconds to pair with the camera.
• A blue LED indicator on the remote signifies successful pairing.

System Settings

Access system settings by pressing the Menu button (☰) during video mode (recording must be stopped).

Resolution

Available resolutions include: 2592 x 1944P 30fps, 2560 x 1600P 30fps, 2560 x 1440P 30fps, 2560 x 1440P 60fps, 2560 x 1080P 60fps, 2560 x 1080P 30fps, 2304 x 1296P 30fps, 1920 x 1080P 60fps, 1920 x 1080P 30fps.

Bitrate

Choose between Low, Medium, or High bitrate. High bitrate enhances video quality and smoothness, especially for fast motion or high contrast scenes, but may reduce recording time. Low bitrate saves space and allows for longer recording.

Loop Recording

Set loop recording to Off or intervals of 1, 2, 3, 5, or 10 minutes. Recording starts automatically with a microSD card. Files are up to three minutes long and older footage is replaced when the card is full.

Exposure

Adjust the EV (Exposure Value) from -2.0 to +2.0 (default 0.0) to improve recording results under different lighting conditions.

HDR (High Dynamic Range)

Options are Off, On, or HDR Timer. The multi-exposure HDR technique balances lighting in bright and dark areas to prevent overexposure.

Parking Mode

Three options are available:

• Auto Event Detection: Records moving objects and stops when no movement is detected.
• Time Lapse Recording: Records at low frame rates continuously without audio.
• Low Bitrate Recording: Records video and audio with small file sizes for continuous recording.

Note: A VIOFO HK4 ACC hardwire kit is recommended for parking mode recording.

Enter Parking Mode Timer

Set the timer for entering parking mode: "Off" (immediate) or "90s" (90 seconds after engine off). This function is only for hardwire cable use.

Parking Recording Timer

Set the duration for parking recording: "Off" (records until power cut) or "1 hour" (shuts down after 1 hour in parking mode).

Parking G-sensor

The G-sensor detects impacts or collisions to trigger event recording. Setting it to High sensitivity is suggested for parking mode.

Parking Motion Detection

Adjust motion detection sensitivity to prevent minor movements (like wind or rain) from triggering recordings in parking mode.

Time-lapse Recording

Set time-lapse recording intervals to Off or 1, 2, 3, 5, or 10 fps to conserve memory and speed up review.

Motion Detection

When activated, recording begins with detected movement. Recording stops after 60 seconds of no movement and switches to detect mode. It will record again if new movement is detected.

GPS

Turn the GPS logger on or off to include location data in videos. Disabling it prevents speed and position measurement and time synchronization. Use "Dashcam Viewer" to visualize position and speed.

Disable GPS in Parking Mode

Toggle GPS in parking mode On or Off.

Speed Unit

Select speed units: kilometers per hour (KPH) or miles per hour (MPH).

G-sensor

Measures g-shock forces. Sensitivity (Low to High) determines the force needed to lock files. Setting it to 'Low' is recommended.

Wi-Fi

Turn Wi-Fi On or Off. Long press the ☁ button for 3 or 5 seconds to enable Wi-Fi quickly. 5GHz Wi-Fi mode is recommended if your phone supports it.

Date Stamp

Imprint the time and date on recorded videos.

GPS Info Stamp

Imprint GPS information on recorded videos.

Camera Model Stamp

Imprint the camera model on recorded videos.

Record Audio

Turn the microphone On or Off using the ▸ MIC button.

Screen Saver

Turn the screen off after a set time.

Boot Delay

Set a delay for camera startup: Off, 5s, or 10s.

LED

Turn the LED light On or Off.

Date / Time

Set the system date and time.

Time Zone

Set the current time zone for GPS time and date calibration. Manual adjustment is required for daylight savings.

Language

Select the display language (e.g., English, Traditional Chinese, French).

Voice Notification

Turn voice notifications On or Off.

Voice Control

Turn voice control On or Off. When enabled, you can control the camera using spoken commands (e.g., take photos, turn Wi-Fi on/off, start recording). Voice command language should be consistent with the dashcam's system language (options include English, Chinese, Russian, Japanese, Vietnamese, Thai). For other language systems, English is the only language for voice control.

Voice Command List

Supported voice commands include:

• Take Photo
• Video Start
• Video Stop
• Turn On Audio
• Turn Off Audio
• Turn On Screen
• Turn Off Screen
• Lock the Video
• Turn On WiFi
• Turn Off WiFi

Beep Sound

Turn all notification sounds On/Off.

Frequency

Adjust frequency settings to minimize flickering and banding in recorded video.

Image Rotation

Rotate the screen display upside down.

Image Mirror

Reverse the image from left to right.

Format

This operation deletes all data on the Micro SD card. Back up important files before proceeding, as data cannot be restored.

Format Warning

Set the number of days between format warnings.

Default Setting

Restore the camera to factory default settings.

Car Number

Imprint a customized set of up to 11 digits (e.g., license plate) onto the recorded video.

Custom Text Stamp

Imprint custom text onto the recorded video.

Firmware Version

Check the current firmware version.

Firmware Upgrade

Follow the instructions on the VIOFO website to upgrade the firmware: https://viofo.com/en/content/42-help-and-support/

Notes:

• Format the microSD card in the camera before upgrading firmware for stable read/write operations.
• Do not unplug or power off the camera during a firmware upgrade, as this may prevent the camera from booting.

Notice

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment causes harmful interference to radio or television reception (which can be determined by turning the equipment off and on), the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications not explicitly approved by the manufacturer may void your authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Shenzhen VIOFO Technology Co., Ltd declares that this Radio Frequency peripheral complies with the essential requirements and other relevant provisions of Directive 1999/5/EC. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. It should be installed and operated with a minimum distance of 20cm between the radiator and your body.

Customer Service

Thank you for choosing VIOFO! All products are warranted for 12 months and accessories for 3 months from the date of purchase. VIOFO offers lifetime technical support.

Product Registration Program: Register your product at www.viofo.com to extend your warranty by 6 months (from 12 to 18 months).

Your Opinion Matters: Share feedback at support@viofo.com.

Video Sharing: Share videos caught on your VIOFO camera with us at share@viofo.com for a chance to win a gift.

How to Contact Us:

• Submit a ticket at support.viofo.com
• Live chat at www.viofo.com
• Email: support@viofo.com
• Facebook: www.facebook.com/viofo.world
• Phone: +86 755 8526 8909 (CN) - Mon-Fri 9am-6pm