Owner Manual
Introduction
Thank you for purchasing the Sectional Sofa.
Please read the instructions and warnings carefully before use, to ensure safe and satisfactory operation of this product. We are committed to making great products possible. From our in-house Design Team, to our Buyers, we work together to bring great designs to life. Our expert Product Technologists work collaboratively with our buyers and suppliers to assure the legality, safety and quality of the product we sell. We are all committed to designing and developing products to the highest industry standards. We hope you are happy with your product and welcome any feedback or comments you may have.
Exploded Diagram
A visual representation of the sectional sofa components laid out separately before assembly. It shows various parts labeled A through L, along with hardware packs numbered 1 through 8, indicating quantities for each.
Hardware Overview:
- 1: Bolt M6*20mm (x36 +3)
- 2: Plastic Clip (x24)
- 3: Support Bar (x8)
- 4: Allen Key 4mm (x12)
- 5: Connection Plate (x6)
- 6: Metal Hook (x1)
- 7: Plastic Washer (x28 +3)
- 8: Felt Mat (x28 +3)
Parts List
Carton A
| Part Label | Description | Quantity |
|---|---|---|
| A | Seat Cushion | x2 |
| B | Seat Panel | x2 |
| C | Seat Frame | x2 |
| D | Back Frame | x2 |
| E | Back Cushion | x2 |
| L | Leg | x8 |
| 1 | Bolt M6*20mm | x 12+1 |
| 2 | Support Bar | x8 |
| 3 | Plastic Clip | x4 |
| 4 | Metal Hook | x4 |
| 5 | Connection Plate | x2 |
| 6 | Allen Key 4mm | x1 |
| 7 | Plastic Washer | x 8+1 |
| 8 | Felt Mat | x 8+1 |
Carton B
| Part Label | Description | Quantity |
|---|---|---|
| B | Seat Panel | x2 |
| C | Seat Frame | x2 |
| D | Back Frame | x2 |
| F | Seat Cushion | x1 |
| G | Back Cushion | x1 |
| H | Back Cushion | x1 |
| K | Seat Cushion | x1 |
| L | Leg | x8 |
| 1 | Bolt M6*20mm | x 12+1 |
| 2 | Support Bar | x8 |
| 3 | Plastic Clip | x4 |
| 4 | Metal Hook | x4 |
| 5 | Connection Plate | x2 |
| 6 | Allen Key 4mm | x1 |
| 7 | Plastic Washer | x 8+1 |
| 8 | Felt Mat | x 8+1 |
Carton C
| Part Label | Description | Quantity |
|---|---|---|
| I | Left Arm | x1 |
| J | Right Arm | x1 |
| L | Leg | x4 |
| 1 | Bolt M6*20mm | x 12+1 |
| 4 | Metal Hook | x4 |
| 5 | Connection Plate | x2 |
| 6 | Allen Key 4mm | x1 |
| 7 | Plastic Washer | x 4+1 |
| 8 | Felt Mat | x 4+1 |
Assembly Instructions
Step 1
Prepare components from Carton A: 2x Seat Cushion (A), 2x Seat Panel (B), 2x Seat Frame (C), 2x Back Frame (D), 2x Back Cushion (E), 8x Leg (L). Gather hardware: 12+1x Bolt M6*20mm, 8x Support Bar, 4x Plastic Clip, 4x Metal Hook, 2x Connection Plate, 1x Allen Key 4mm, 8x Plastic Washer, 8x Felt Mat.
Step 2
Take 2x Seat Cushion (A) and 2x Back Cushion (E). Cut along the indicated line on the packaging of the cushions. Place the cushions on a flat surface and allow them 48 hours to fully expand after being unpackaged.
Step 3
Attach 2x Back Frame (D) to 2x Seat Frame (C) using 8x Bolt M6*20mm (1) and 4x Metal Hook (4). Secure with Allen Key 4mm (6).
Step 4
Attach 4x Leg (L) to the bottom of the assembled Seat Frames (C). Use 8x Bolt M6*20mm (1) and 8x Plastic Washer (7). Then, attach 8x Felt Mat (8) to the bottom of the Legs (L).
Step 5
Attach 2x Support Bar (2) to the inside of 2x Seat Frames (C) using 8x Bolt M6*20mm (1).
Step 6
Insert 2x Back Frame (D) into the slots on the Seat Frame (C). Ensure the side of the backrest is flush with the side of the seat frame. Secure with 2x Metal Hook (4).
Step 7
Attach 2x Seat Frame (C) to 2x Back Frame (D) using 4x Bolt M6*20mm (1) and 2x Connection Plate (5). Secure with Allen Key 4mm (6).
Step 8
Prepare components from Carton B: 2x Seat Panel (B), 2x Seat Frame (C), 2x Back Frame (D), 1x Seat Cushion (F), 1x Back Cushion (G), 1x Back Cushion (H), 1x Seat Cushion (K), 8x Leg (L). Gather hardware: 12+1x Bolt M6*20mm, 8x Support Bar, 4x Plastic Clip, 4x Metal Hook, 2x Connection Plate, 1x Allen Key 4mm, 8x Plastic Washer, 8x Felt Mat.
Step 9
Take 2x Seat Cushion (F & K) and 2x Back Cushion (G & H). Cut along the indicated line on the packaging of the cushions. Place the cushions on a flat surface and allow them 48 hours to fully expand after being unpackaged.
Step 10
Attach 2x Back Frame (D) to 2x Seat Frame (C) using 8x Bolt M6*20mm (1) and 4x Metal Hook (4). Secure with Allen Key 4mm (6).
Step 11
Attach 4x Leg (L) to the bottom of the assembled Seat Frames (C). Use 8x Bolt M6*20mm (1) and 8x Plastic Washer (7). Then, attach 8x Felt Mat (8) to the bottom of the Legs (L).
Step 12
Attach 2x Support Bar (2) to the inside of 2x Seat Frames (C) using 8x Bolt M6*20mm (1).
Step 13
Insert 2x Back Frame (D) into the slots on the Seat Frame (C). Ensure the side of the backrest is flush with the side of the seat frame. Secure with 4x Bolt M6*20mm (1).
Step 14
Attach 2x Seat Frame (C) to 2x Back Frame (D) using 2x Bolt M6*20mm (1) and 1x Connection Plate (5). Secure with Allen Key 4mm (6).
Step 15
Prepare components from Carton C: 1x Left Arm (I), 1x Right Arm (J), 4x Leg (L). Gather hardware: 12+1x Bolt M6*20mm, 4x Metal Hook, 2x Connection Plate, 1x Allen Key 4mm, 4+1x Plastic Washer, 4+1x Felt Mat.
Step 16
Attach 4x Left Arm (I) and Right Arm (J) to the frame. Use 8x Bolt M6*20mm (1) and 4x Metal Hook (4). Secure with Allen Key 4mm (6).
Step 17
Attach 4x Leg (L) to the bottom of the assembled arms. Use 4x Bolt M6*20mm (1) and 4x Plastic Washer (7). Then, attach 4x Felt Mat (8) to the bottom of the Legs (L).
Step 18
Insert 4x Back Frame (D) into the slots on the Seat Frame (C). Ensure the side of the backrest is flush with the side of the seat frame. Secure with 4x Bolt M6*20mm (1).
Step 19
Attach 2x Seat Frame (C) to 2x Back Frame (D) using 4x Bolt M6*20mm (1) and 2x Connection Plate (5). Secure with Allen Key 4mm (6).
Step 20
Connect multiple assembled seat units together. Use 8x Plastic Clip (3) to join the units.
Step 21
Place 5x Seat Panel (B) onto the assembled seat frames.
Step 22
Place 4x Seat Cushion (A) and 1x Seat Cushion (F) onto the assembled seat frames.
Step 23
Place 4x Back Cushion (E) and 2x Back Cushion (G, H) onto the assembled back frames.
Step 24
Attach 2x Seat Panel (B) to the Seat Frame (C).
Step 25
Attach 1x Seat Cushion (K) to the Seat Panel (B).
Step 26
The sectional sofa is now assembled. This configuration uses Carton A * 2, Carton B * 1, Carton C * 1.
Assembly Types
Various configurations are possible:
- Configuration 1: Uses Carton A * 1, Carton C * 1.
- Configuration 2: Uses Carton A * 2, Carton C * 1.
- Configuration 3: Uses Carton A * 2, Carton B * 1, Carton C * 1.
- Configuration 4: Uses Carton A * 2, Carton B * 2, Carton C * 1.
Maintenance and Warning
- Keep furniture away from heat.
- Do not clean furniture with harsh cleansers or polish. Do not use detergents, solvents, abrasives, spray packs, or leather cleaner. Use non-colored mild soap with warm water for spills (Mix 1:10 soap to water).
- Do not place furniture under direct sunlight, as the material may fade over time.
- Do not use an on-site dry cleaning machine.
- Children should not climb or jump on the furniture.
- Do not write on furniture without a padded barrier to protect the surface.
- Not for commercial use. For residential use only.
- The maximum load is 300 LBS/each.
Warranty
Latitude Run strives to offer high-quality products and to satisfy every customer with product or service as needed. A 30-day warranty is provided starting from the time the item is received. Each customer must provide a record of their order, such as the order number or item receipt, for any items that are out of the warranty period. Replacement parts may still be available for purchase from the company if they are available.
If you are having difficulty with assembly or are missing parts, please send an email with your order number. For returns, please check the return policy with the retailer or marketplace where you purchased the item. We appreciate your purchase from us. Enhance your life with our furniture piece!
