eufy Security Smart Lock R10 Quick Start Guide

1. PRODUCT OVERVIEW

For Smart Lock Installation:

• Model: T8503 (A)
• (B)
• (C)
• (D)
• (E)

For Keypad Installation:

• Model: T8591 (F)
• (G)
• (H)
• (I)
• (J)
• (K)

2. COMPATIBLE DOORS

Diagram showing compatible and incompatible door lock types. Incompatible types are crossed out with red lines.

3. INSTALLING KEYPAD

Step-by-step instructions with diagrams for installing the keypad.

Option 1: 3M Sticker

1. Clean the door surface.
2. Align and attach the keypad.
3. Attach the mounting plate (J) to the keypad housing (F).
4. Secure the keypad to the door.

Option 2: Expansion Bolts

1. Drill holes in the door frame.
2. Insert expansion bolts (H) and screws (G).
3. Attach the keypad housing (F).

4. INSTALLING SMART LOCK

Step-by-step instructions with diagrams for installing the smart lock.

1. Install the mounting plate.
2. Insert the tailpiece through the latch.
3. Secure the mounting plate to the door using screws (G) and screw pads if needed.
4. Select the appropriate adapter (C) based on the tailpiece shape and angle.
5. Attach the smart lock body (B) to the mounting plate.
6. Lock and unlock to test.
7. If the smart lock is not installed tightly, use the provided 3M sticker (A).

5. SETTING UP THE SYSTEM

1. Download and install the eufy Security app from the App Store or Google Play. Sign up for an account.
2. Follow the on-screen instructions to add the smart lock to your device list. The app will prompt you to scan a QR code or enter the serial number.

6. NOTICE

Environmental Considerations:

• Do not use the device in extreme temperatures (too high or too low), direct sunlight, or excessively humid environments.
• Suitable operating temperatures: 0°C - 49°C (32°F - 120.2°F) for the lock, and -10°C - 50°C (-50°F - 122°F) for the keypad.
• For optimal performance, operate the device in a normal room temperature environment with good ventilation (recommended range: 5°C - 25°C / 41°F - 77°F).

Product Quality:

• This product is designed and manufactured with high-quality, recyclable, and reusable materials and components.

Battery Safety:

• CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. Dispose of used batteries according to instructions.

Mounting Height:

• The equipment is suitable for mounting at heights up to 2 meters (≤ 2 m).

FCC Statement:

• This device complies with Part 15 of the FCC Rules. Operation is subject to two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
• Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
• This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
• This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: (1) Reorient or relocate the receiving antenna. (2) Increase the separation between the equipment and receiver. (3) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. (4) Consult the dealer or an experienced radio / TV technician for help.

FCC Radio Frequency Exposure Statement:

• The device has been evaluated to meet general RF exposure requirements. The device can be used in fixed / mobile exposure condition. The minimum separation distance is 20 mm.

Notice: Shielded cables:

• All connections to other computing devices must be made using shielded cables to maintain compliance with FCC regulations.

Importer Information:

• Company Name: POWER MOBILE LIFE, LLC
• Address: 10900 NE 8TH ST, STE 501, BELLEVUE, WA 98004
• Telephone: 1-800-988-7973

CUSTOMER SERVICE

Warranty:

• 12-month limited warranty
• Garantía limitada de 12 meses
• Garantie limitée de 12 mois

Contact Information:

• +1 (800) 988 7973 (Mon-Fri 9AM-5PM PT)
• +44 (0) 1604 936 200 (Mon-Fri 6AM-11AM GMT)
• +49 (0) 69 9579 7960 (Mon-Fri 6:00-11:00)
• Customer Support: support@eufylife.com

Anker Innovations Limited Address:

• Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok, Kowloon, Hong Kong

Social Media:

• Facebook: @EufyOfficial
• Twitter: @EufyOfficial
• Instagram: @EufyOfficial