Introduction
This document serves as a quick installation and start-up guide for the ABB ACS560 general purpose drive. It is designed to assist users through the initial setup process, ensuring a safe and efficient installation.
Key Information
- Product: ACS560 Standard Control Program Drive
- Manufacturer: ABB
- Purpose: Installation and start-up guidance
- Content Overview: Safety instructions, general considerations, installation methods (DIN rail and screw mounting), and cable connection procedures.
Safety First
Users are strongly advised to adhere to all safety instructions provided within the guide. Electrical installation work should only be performed by qualified electricians. Always ensure power is disconnected before working on the drive or its components.
Installation
The ACS560 drive can be installed either on a DIN installation rail (for frames R0-R2) or mounted with screws to a suitable surface (for all frames R0-R8). The guide details the required tools and step-by-step procedures for both methods.
Cable Connections
Proper connection of motor and input power cables is crucial for the drive's operation. The guide includes detailed diagrams and instructions for grounding shields, connecting phase conductors, and tightening screws to the specified torque values.
Further Information
For comprehensive details, refer to the official ABB ACS560 firmware manual and hardware manual, which are available on the ABB website.
