Product Diagrams
The SARINA Vintage Vinyl speaker features the following components:
- 1. Tone Arm: Functions as the ON/OFF switch for the turntable.
- 2. Spinning Record: Rotates when music is playing, providing a visual cue.
- 3. Mode Switch: Used to select different operational modes.
- 4. Indicator Light: Displays the operational status of the device.
- 5. Charging Port: Connection point for the charging cable.
- 6. Audio Controls: A versatile control for playback and volume.
- Volume Adjustment: Rotate the control.
- Track Navigation: Single press for the next track, double press for the previous track.
- Playback Control: Long press to pause or play music.
- Bluetooth Mode Operations:
- Rotate left to decrease volume.
- Rotate right to increase volume.
- Short press to advance to the next song.
- Double click to go to the previous song.
- Long press for 2 seconds to pause or play the current track.
- Telephone Call Management:
- Short press to answer an incoming call.
- Short press to end an ongoing call.
- Long press to reject an incoming call.
- FM Mode Operations:
- Rotate left to decrease volume.
- Rotate right to increase volume.
- Press and hold for 3 seconds to scan for and save radio stations.
- Short press to select the next saved station.
- Double click to select the previous saved station.
- 7. AUX Jack: An input port for wired audio connections.
Specifications
- Bluetooth Version: 5.1
- Battery: 3.7V / 300mAh
- Charging Time: 3 hours
- Input Parameter: DC 5V 1A
- Loudspeaker: 40mm, 4Ω, 3W
- Bluetooth Link Range: 10 meters
- Product Dimensions: 112.4 x 105 x 57mm
- Weight: 0.593 lb / 0.269 kg
- FCC ID: 2AANZVNYL1
Package Contents
- Vintage Vinyl speaker unit
- Micro USB charging cable
- User manual
- 3.5mm Audio cable
Internal Battery Care
- Ensure the speaker is fully charged before initial use.
- Avoid overcharging. A full charge typically takes 2-3 hours. Prolonged overcharging can severely impact battery life.
- The speaker may discharge over time if not used for an extended period.
- Always use the provided charging cable for this device.
- The indicator light shows red while charging and turns blue upon completion.
Bluetooth Pairing Instructions
- Set the mode switch to Bluetooth. The speaker will automatically be ready for pairing.
- On your smartphone or tablet, navigate to Bluetooth settings, find available devices, and select "SA-VNYL".
- If prompted for a passcode, enter "0000". A confirmation beep will sound once pairing is successful.
- The speaker will automatically connect to previously paired devices.
Safety Guidelines
- Please read these instructions thoroughly before use and keep them for future reference.
- Keep the speaker away from heat sources and open flames.
- Do not insert sharp objects or metallic items into the speaker to prevent electrical short circuits.
- Do not attempt to repair the speaker yourself.
- Power off the device if it is exposed to extreme temperatures or liquids.
- Do not connect the device to AC power directly; ensure it is unplugged and charged before each use.
FCC Compliance Information
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device must not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Warning: Modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Note on Interference: This equipment has been tested and found to comply with the limits for a Class B digital device, as per Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in residential installations. The equipment generates, uses, and can radiate radio frequency energy. If not installed and used according to instructions, it may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a specific installation. If the equipment causes harmful interference to radio or television reception (which can be verified by turning the equipment off and on), users are encouraged to attempt to correct the interference by one or more of the following methods:
- Reorient or relocate the receiving antenna.
- Increase the distance between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from the one used by the receiver.
- Consult the dealer or an experienced radio/TV technician for assistance.
FCC Radiation Exposure Statement: The device has been evaluated to meet general radio frequency (RF) exposure requirements. It can be used in portable exposure conditions without restriction.
Product Support
Sarina stands behind the quality of this product. For any inquiries or feedback, please contact DGL Group, Ltd. via email at support@dglusa.com.
Distributed by DGL Group, Ltd., Edison, NJ 08817.
