GVM-CL100B LED Video Light

Important Safety Instructions

This product is professional lighting and staging equipment and should be used by a professional lighting technician or under the guidance of a professional. Always follow these cautions:

1. Read the product manual carefully before use.
2. Suitable for use in temperatures ranging from -20°C to 45°C.
3. Do not place near flammable and volatile solvents like alcohol and gasoline.
4. Store the device after it has cooled down completely, unplugged, in its carrying case or a well-ventilated, dry place.
5. Not for general illumination; individuals with eye injuries or sensitivity should avoid use.
6. This is a professional light; children are prohibited from using it. Parents/guardians must supervise children.
7. Remove the protective cover before use.
8. Do not stare directly at the light source. High-intensity lighting should only be used under professional guidance. Avoid prolonged exposure to high-intensity light environments. Seek medical attention if discomfort occurs.
9. Avoid contacting high-temperature components like LED light sources to prevent burns.
10. Do not use damaged equipment or accessories. Wait for professional inspection and repair.
11. If the light source is damaged or deformed due to heat, stop use and contact the manufacturer or a qualified repairman.
12. If the product is cracked due to impact, stop use to avoid electrical shock.
13. Do not disassemble the product yourself. Malfunctions must be checked and repaired by the manufacturer or authorized personnel.
14. Before cleaning/maintenance, unplug the power supply. Pull the plug, not the cable. Use earthed power outlets or emergency generators.
15. When cleaning, use a dry, soft cloth. Do not use wet cloths or solvent-based liquids.
16. If an extension cord is required, ensure it has sufficient capacity to prevent overheating.
17. Place long power cords properly to avoid tripping or damage from overheated surfaces. Use original power cords; damage from non-original cords is not covered by repair service.
18. Do not use product accessories not recommended by the brand to avoid fire, electric shock, or personal injury.
19. For battery-powered products, use only specified batteries/sources. Keep batteries out of reach of children. Seek medical attention if swallowed. Remove leaking/deformed batteries immediately, being careful not to get burned. Do not use deformed/modified batteries. Do not disassemble or modify the product or battery. Do not heat, solder, expose to fire/water, or subject to strong external force. Ensure correct battery polarity and do not mix old/new or different battery types.
20. For products with built-in lithium batteries, use a dedicated charger and follow operating instructions.
21. The warranty lasts for one year. Consumables (batteries, adapters, power cords, accessories) are not covered.
22. The one-year warranty is invalidated if the equipment is repaired privately.
23. Malfunctions caused by non-standard operations are not covered.
24. Safety instructions are based on factory testing. Design/specifications may change without notice. Visit the official website for the latest version.

⚠️ WARNING:

• High-power LED lights are strictly prohibited from being directly viewed or shining into other people's eyes.
• Do not unplug the power cord or connecting wires while the light is on to avoid personal injury.
• Do not cover the heat dissipation port when the lamp is in operation.
• Keep children away from touching or using this light.
• Operate correctly according to the user manual.

Product Introduction

Thank you for purchasing the GVM-CL100B. This product is designed for photography and videography enthusiasts, suitable for live stream, outdoor, studio, and YouTube shoots.

Main Features:

1. High-definition COB light chips (CRI 97+) for accurate color reproduction, enriching and bringing out the subject's actual color for a natural image.
2. APP control: Control via iOS and Android smart mobile devices, and group control with other GVM devices supporting Bluetooth mesh networking.
3. Three light modes: CCT mode, Source Matching mode (APP only), and Effects mode (APP only).
• CCT Mode: Adjust light intensity and color temperature.
• Source Matching Mode: Choose from 12 simulated light sources: Tungsten, HMI5600, HMI6000, Studio Lamps, Sodium Lamp, Halogen, Arc Lamp, Candle, Sunset/Sunrise, Daylight, Overcast Sky, CFL Cool White.
• Effects Mode: Accessible only through the APP.

Proper use will enhance your production workflow. Reading the user guide carefully before use is strongly recommended.

Disclaimers

1. Read instructions and warnings carefully. Failure to do so may cause damage to the product, surrounding items, or harm to individuals.
2. By using this product, you agree to the terms and conditions and take full responsibility for its use and consequences.
3. Design and specifications are subject to change without notice.

Product Parameter

Precautions

1. Use the matching power adapter or lithium battery with the same specification. Do not use adapters with different output voltage parameters.
2. The product is not waterproof; use it in a rainproof environment.
3. The product is not anti-corrosion; do not let it touch corrosive liquids.
4. Ensure the product is placed firmly to prevent falling and damage.
5. If the product will not be used for a long time, switch off the power to reduce energy loss.

Product Structure Diagram

The product features the following components:

• COB light chip: The main light source.
• 1/4 screw hole: For mounting accessories.
• Anti-twist locating hole: Prevents rotation when mounted.
• DC power input: Port for DC power adapter.
• Type-C Power delivery port: For Type-C charging and power.
• Selection knob: Used for menu navigation and parameter adjustment.
• Battery latch: Releases the battery compartment.
• Cooling fan: Dissipates heat.
• Display screen: Shows settings, modes, and parameters.
• Battery compartment cover: Protects the battery slot.
• Return button: Navigates back in menus.
• Power button: Turns the device on/off.

Installation Method

1. Attaching/Detaching Reflector

Attach: Match the three prongs on the reflector with the notches on the light's mini Bowens mount. Push the reflector straight in until the prongs slide into the notches. Rotate clockwise until you hear or feel a "click" or "snap".

Detach: Gently press and pull back the release lever. While holding the release, twist the reflector counterclockwise. Then, pull the reflector straight out.

2. Attaching/Detaching Cold Shoe Adapter

Install: Align the screw of the cold shoe adapter with the 1/4"-20 thread on the light. Turn the light body clockwise and tighten the thumb-wheel by hand (avoid over-tightening). Align the cold shoe foot with the camera's cold shoe slot. Slide it in carefully until fully seated, then tighten the locking ring by hand.

Uninstall: Twist the locking ring counterclockwise to loosen the grip. Carefully slide the light backward out of the cold shoe mount. Unscrew the thumbwheel counterclockwise from the threaded hole.

3. Adjusting Angle

Turn the angle adjustment knob counterclockwise to loosen the angle lock. Gently move the light to the desired position (tilt forward/backward). Once the desired angle is set, tighten the knob clockwise to lock it.

4. Power Supply Methods

There are three power supply methods:

1. DC input 5525 port: 15V/7A, 20V/5A (Recommended).
2. NP-F series external battery: F750_7.4V (Power 35W).
3. TYPE-C interface power supply: PD2.0/3.0 fast charge adapter, output 15V/3A or 20V/5A. (Note: 5V is generally not applicable. A dual-head TYPE-C high-power fast charging cable is recommended.)

Description of Product Control Keys

1. Battery latch: Pull back to release the battery.
2. Knob:
   [Rotate]: Select a menu, mode, or adjust parameters.
   [Click]: Go to the menu or confirm the selection.
3. Power button: Long press to turn on or off the power.
4. Back key: Press to return to the previous menu.
5. Display: Shows current settings, modes, and parameters.
6. TYPE-C port: Connects the TYPE-C cable to power the light. (A dual-head TYPE-C high-power fast charging cable is recommended.)
7. DC power port: Connects the DC power cable to supply power to the light.

Function Introduction & Instructions For Use

① LIGHT Mode

Rotate the knob to select the mode type and press the knob to enter the selected mode. Press the [BACK] key to return to the previous menu.

CCT Mode:

Adjustable light intensity and color temperature.

1. Rotate the knob to select [INT], press the knob to enter [INT], and rotate the knob to adjust light intensity.
2. Rotate the knob to select [CCT], press the knob to enter [CCT], and adjust color temperature by rotating the knob.

Source Mode:

Choose from 12 simulated light sources: Tungsten, HMI5600, HMI6000, Studio Lamps, Sodium Lamp, Halogen, Arc Lamp, Candle, Sunset/Sunrise, Daylight, Overcast Sky, CFL Cool White.

1. Turn the knob to select the light source type → Press the knob to enter the parameter adjustment page for this light source type.
2. After entering the parameter adjustment page, turn the knob to adjust the intensity.

FX Mode (Effects):

This mode can only be used when the APP is connected to the control.

② FAN SETTINGS

Select the operating mode of the cooling fan [Smart/High/Silent].

• Smart: Fan speed changes with temperature.
• High: Fan runs at maximum speed. Recommended when ambient temperature is above 40°C.
• Silent: Stops the fan and decreases light output power to 10-20W. Not recommended for prolonged use.

③ BLUETOOTH

BT State: View Bluetooth status and turn on/off the Bluetooth function.

BT Reset: Select [Yes] to reset the Bluetooth function.

④ BATTERY

Power saving OFF: Continuous full power output.

Power saving ON: When the battery level is below 40%, power output will be reduced. After enabling power-saving mode, the device will automatically save current settings and retain this mode on next start.

Settings

• Language: Set the system language (e.g., English, 中文).
• TEMP: Displays the current temperature of the product (e.g., 26.0℃).
• Products: View system information (Firmware VN: V1.04, Hardware VN: V2.00).
• Reset: Reset the light to its default settings.

APP Control

APP Download Method

(Scan the QR code on the back of the manual to download the APP)

• Android Device: Official website QR code, Google Play, Huawei Store, etc.
• iOS Device: App Store.

Device-adding

1. Before adding a device, ensure your phone's Bluetooth and network data are turned on, and accessibility is granted. Reset the lighting device's Bluetooth.
2. Click the "Add Device" button on the "My Devices" page to find nearby Bluetooth light devices.
3. Select the device to be connected for pairing.

* Android requires location permissions to be turned on for mesh technology connection. Your location information is not collected during this process.

Device Management

1. After successfully adding your lighting device, it will be displayed in the "My Devices" list.
2. Click on the Device to access device control.

Account Login

• Use email to get a verification code to log in (first login automatically registers the account).
• There may be a delay in sending the verification code, depending on the email server.
• Some email servers may classify verification emails as promotions; check your spam folder.
• After logging in, you can synchronize Mesh Bluetooth devices bound to the current account to other smart devices.

Quick Troubleshooting

Use and Preservation

• Do not place the product in high humidity, strong electromagnetic fields, direct sunlight, or high-temperature environments. If not used for a long time, disconnect its power.
• Cleaning: Unplug the power before cleaning. Use a dry cloth only; avoid cleaning agents or solvent-based liquids.
• Power: Ensure power is within the demanded range.
• Repairing: Do not unpack the shell yourself if there is a fault or performance degradation. Contact GVM for assistance.
• Accessories: Use only manufacturer-provided or approved accessories.
• Warranty: Do not modify the product, or you will lose the right to maintenance.

Packing List

Product Warranty

This warranty card is important proof for applying for warranty service. Please cooperate with the salesperson to fill it out and keep it properly.

Warranty Card Details

Note: This form should be confirmed by the salesperson's stamp.

Applicable Products

This document applies to products listed in the relevant "Product Warranty Information". Other products or components not within this scope (e.g., promotional items, added components) are not covered.

Warranty Period

The warranty period starts from the first day of purchase. The date of registration on the warranty card at the time of purchase shall prevail.

How to Obtain Warranty Service

Contact the product salesperson, authorized service agency, or GVM's after-sales service hotline. Provide a valid warranty card for eligibility. GVM may provide service if products are confirmed within warranty scope, but it is not an obligation.

Cases Where Warranty Does Not Apply:

1. Product or parts have exceeded the warranty period.
2. Malfunctions or damages due to incorrect use, maintenance, storage, improper handling, use for unintended purposes, incorrect insertion/removal of external devices, falling, crushing, or exposure to inappropriate temperature, solvents, acids, alkalis, water immersion, or damp environments.
3. Malfunctions or damages caused by unauthorized installation, repair, modification, addition, or disassembly.
4. Modifications, changes, or removals of original identification information.
5. Lack of a valid warranty card.
6. Malfunctions or damages caused by unauthorized, non-standard, or non-publicly released software.
7. Malfunctions or damages caused by force majeure or accidents.
8. Other malfunctions or damages not caused by product quality issues. GVM will not be held liable. Malfunctions or damages caused by components, accessories, or software not covered by warranty or beyond the warranty scope are not covered. Normal fading, wear, and consumption during product use are not covered.

Product Warranty and Service Support Information

Company Information

Huizhou Latu Film Equipment Co., Ltd.

Web: www.gvmled.com

B&H Email: bh@gvmled.com

GVM Email: support@gvmled.com

Amazon Email: amazonsupport@gvmled.com

Warehouse Address: 12285 MCNULTY RD, STE 105 PHILADELPHIA, Pennsylvania 19154, USA