IKEA GONATT Crib Assembly Instructions
This document provides assembly instructions for the IKEA GONATT crib with drawers.
Tools Required
The following tools are typically required for assembly:
- Screwdriver (Phillips head) ?
- Hammer ?
Illustration showing a person with a screwdriver and a hammer.
General Assembly Tips
- Assemble on a soft surface like a rug to prevent scratches. ❌
- If you encounter difficulties, refer to the IKEA customer support. ?
Illustrations showing incorrect assembly (on a hard surface) and correct assembly (on a rug), and a person looking confused with parts, then calling IKEA.
Parts List
Ensure all parts are present before starting assembly. The following components are included:
| Part Description | Quantity | Part Number |
|---|---|---|
| Screw | 10x | 105657 |
| Screw | 8x | 100224 |
| Dowel | 8x | 100092 |
| Cam lock | 12x | 123492 |
| Cam bolt | 12x | 110630 |
| Screw | 3x | 119245 |
| Screw | 4x | 105905 |
| Screw | 4x | 100514 |
| Screw | 10x | 123502 |
| Dowel | 4x | 110301 |
| Bracket | 4x | 10006504 |
| Screw | 4x | 130718 |
| Dowel | 8x | 101350 |
| Dowel | 4x | 101345 |
| Handle | 4x | 119976 |
| Handle bracket | 1x | 105905 |
| Cotter pin | 4x | 147164 |
| Allen key | 1x | 123502 |
| Caster wheel | 5x | 111401 |
| Drawer knob | 3x | 119976 |
| Drawer base support | 4x | 153549 |
Assembly Steps
Step 1
Attach the base supports to the side panels using dowels (101350) and screws (100224).
Illustration showing the assembly of the base structure with 8 dowels and 8 screws.
Step 2
Attach the side panels to the headboard and footboard using cam locks (100092) and cam bolts (123492).
Illustration showing the attachment of side panels to the headboard and footboard using 4 screws and cam lock/bolt system.
Step 3
Insert the mattress base supports into the designated slots and secure them with screws (100514).
Illustration showing the insertion of mattress base supports and securing them with 4 screws.
Step 4
Attach the remaining side panels using screws (105905).
Illustration showing the attachment of the second set of side panels with 2 screws.
Step 5
Slide the back panel into the grooves.
Illustration showing the back panel being slid into place.
Step 6
Attach the top panel.
Illustration showing the top panel being placed on the structure.
Step 7
Secure the top panel with screws (105905).
Illustration showing the top panel being secured with 4 screws.
Step 8
Attach the drawer runners to the side panels using screws (10006504).
Illustration showing the attachment of drawer runners with 4 screws.
Step 9
Attach the drawer sides to the drawer front using screws (109504).
Illustration showing the drawer sides being attached to the drawer front with 4 screws.
Step 10
Attach the drawer bottom to the drawer sides.
Illustration showing the drawer bottom being attached.
Step 11
Insert the drawer into the crib.
Illustration showing the drawer being inserted into the crib.
Step 12
Attach the drawer knobs using screws (101345).
Illustration showing the attachment of drawer knobs with 4 screws.
Step 13
Attach the caster wheels to the base of the crib using screws (110630).
Illustration showing the attachment of caster wheels with 4 screws.
Step 14
Secure the drawer assembly to the crib using cotter pins (147164).
Illustration showing the drawer assembly secured with cotter pins.
Step 15
Attach the drawer handles using screws (119245).
Illustration showing the attachment of drawer handles with 2 screws.
Final Check
Ensure all screws are tightened and the crib is stable before use. ✔️
For further assistance, please refer to the IKEA website or contact IKEA customer service.
