Touch Wheel RF Remote Controller
Model No.: RT5/RT10
1 and 4 zone RGB+CCT/Touch color wheel/Wireless remote 30m distance/AAAx2 battery/Magnet stuck fix
Features
- Apply to RGB+CCT LED controller.
- Ultra sensitive color adjustment touch wheel.
- Each remote can match one or more receiver.
- AAAx2 battery powered.
- Operate with LED indicator light.
- Magnet on the back which can be stuck on back holder.
Certification: CE ROHS emc LVD RED
Technical Parameters
| Parameter | Value |
|---|---|
| Input and Output | RF(2.4GHz) |
| Working voltage | 3VDC(AAAx2) |
| Working current | <5mA |
| Standby current | < 10μΑ |
| Remote distance | 30m(Barrier-free space) |
| IP rating | IP20 |
| Operation temperature | -30°C~+55°C |
Safety and EMC
| Standard | Version |
|---|---|
| EMC standard (EMC) | ETSI EN 301 489-1 V2.2.3 ETSI EN 301 489-17 V3.2.4 |
| Safety standard(LVD) | EN 62368-1:2020+A11:2020 |
| Radio Equipment(RED) | ETSI EN 300 328 V2.2.2 |
| Certification | CE, EMC,LVD, RED |
Warranty
| Item | Period |
|---|---|
| Warranty | 1 year |
| Warranty | 5 years |
Weight
| Item | Weight |
|---|---|
| Net weight | 48g |
| Gross weight | 88g |
Mechanical Structures and Installations
Installation Options:
- Option 1: Stick the remote on any metal surfaces directly.
- Option 2: Fix the remote's back holder on the wall with two screws.
- Option 3: Adhere the remote's back holder to the wall with a paster.
Dimensions:
Height: 122.00 mm, Width: 53.00 mm, Depth: 17.50 mm
Components:
- Remote controller with magnet back holder.
- Uses 2x AAA batteries.
Operation
- When powered on, the indicator displays blue; when powered off, it displays red.
- Touching the color wheel displays the corresponding color on the indicator.
- If touch or press operation is invalid (light is off), the indicator displays red.
- To conserve battery, the touch wheel enters sleep mode after a few seconds of inactivity. Press any key to wake it up.
Match Remote Control (Two Match Ways)
Use the controller's Match key
- Match: Short press the match key, then immediately press the ON/OFF key (for single zone remotes) or a zone key (for multi-zone remotes). The LED indicator will flash rapidly to confirm a successful match.
- Delete: Press and hold the match key for 5 seconds to delete all matched remotes. The LED indicator will flash rapidly to confirm deletion.
Use Power Restart
- Match: Switch off the power, then switch it back on. Immediately short press the ON/OFF key (single zone) or a zone key (multi-zone) 3 times. The light blinking 3 times indicates a successful match.
- Delete: Switch off the power, then switch it back on. Immediately short press the ON/OFF key (single zone) or a zone key (multi-zone) 5 times. The light blinking 5 times indicates that all matched remotes have been deleted.
Key Function
RT5 1 Zone RGB+CCT Remote
- Power Button: Turn on/off light.
- Color Wheel: Touch to change RGB color or color temperature. Press the RGB or CCT key to switch between the RGB wheel and CCT wheel.
- Brightness Adjustment: Short press for 10 brightness levels, long press for 1-6 seconds for continuous 256 levels adjustment.
- Color Temperature Adjustment: Short press adjusts color temperature via WW/CW channels (11 levels). Long press adjusts WW+CW brightness continuously.
Color Wheel Functionality:
- RGB Color Selection: Short press to select from 24 static RGB colors.
- Dynamic Mode: Short press to cycle through dynamic modes; long press for 2 seconds to cycle through mode speeds.
- Speed Adjustment: Short press adjusts speed in 10 levels; long press for 2 seconds returns to default speed.
- Static RGB Color Saturation: For static RGB colors, adjust saturation by mixing in white light. Short press offers 11 levels; long press for 1-6 seconds allows continuous 256 levels adjustment.
- Individual Color Selection (R, G, B): Short press to directly select Red, Green, or Blue. Long press for 1-6 seconds allows continuous brightness adjustment for R/G/B to achieve millions of colors.
- White (WW/CW) On/Off: Short press to turn white channels on/off. Long press for 1-6 seconds continuously adjusts white (WW+CW) brightness, effectively changing saturation by adding white light.
- Scene Recall/Save: Short press to recall saved scenes (S1/S2). Long press for 2 seconds to save the current color state to S1/S2. The LED indicator turns green upon successful save.
RT10 4 Zone RGB+CCT Remote
Each zone can be controlled independently for single color, dual color (WW/CW), RGB, RGBW, or RGB+CCT (WW/CW) controllers or lamps.
- Zone Selection: Buttons 1-4 select the active zone.
- All Zone Control: The '*' button turns all selected zones on/off.
- Type Setting: Long press the zone button (e.g., 1) and then the desired type key (e.g., RGB) for 2 seconds to set the zone type. The green indicator stays lit for a long time upon successful type change.
Zone Specific Functions:
- On/Off: Short press the zone button to select and turn on the zone light. Long press the zone button for 2 seconds to turn off the zone light.
- Color/Temperature Adjustment: Touch the color wheel to change the RGB color or color temperature of the selected zone. Press the RGB or CCT key to switch between the RGB wheel and CCT wheel.
- Brightness Adjustment: Short press for 10 brightness levels; long press for 2 seconds to reach minimum or maximum brightness.
- Dynamic Mode: Short press to cycle through dynamic modes; long press for 2 seconds to cycle through mode speeds.
- Speed Adjustment: Short press adjusts speed in 10 levels; long press for 2 seconds returns to default speed.
- Static RGB Color Saturation: For static RGB colors, adjust saturation by mixing in white light. Short press offers 11 levels; long press for 1-6 seconds allows continuous 256 levels adjustment.
- Scene Recall/Save: Short press to recall saved scenes (S1/S2) for the selected zone. Long press for 2 seconds to save the current state to S1/S2. The LED indicator turns green upon successful save. This function operates synchronously for all 4 zones.
Safety Information
- Read all instructions carefully before installation.
- Pay attention to battery polarity when installing batteries. Remove batteries if the remote will not be used for an extended period. Replace batteries if the remote's range or responsiveness decreases.
- If the receiver does not respond, re-match the remote.
- Handle the remote gently and avoid dropping it.
- For indoor and dry location use only.
