300-WATT POND DE-ICER

PREVENTS WINTER FISH LOSS BY KEEPING A HOLE IN THE ICE, HELPING TO ENSURE PROPER GAS EXCHANGE DURING WINTER

Product Introduction and Warranty

Thank you for choosing the Aquascape 300-Watt Pond De-Icer. At Aquascape, our goal is to supply our customers with the best valued products in water gardening. We hope you enjoy your purchase and thank you for choosing Aquascape. Your Paradise. Our Passion.®

3 YEAR WARRANTY

The Aquascape 300-Watt Pond De-Icer is guaranteed for three years from date of purchase. Proof of purchase required. Warranty does not cover damage resulting from negligent handling, misuse or lack of reasonable maintenance or care. Warranty is valid against defects due to material and the company's workmanship only. The sole obligation shall be to replace the defective unit with a suitable replacement unit. Units should be checked for proper operation prior to returning as defective. No liability for loss or damage of any nature or kind, whether arising out of or from the use of the product, whether defective or not defective, is assumed by Aquascape, Inc. or its affiliates.

Contact and Resources

For more information about our company or products please visit our website at www.aquascapeinc.com or call [phone] (US) 1-866-877-6637 [phone] (CAN) 1-866-766-3426.

Visit our website: www.aquascapeinc.com

Download a free copy of our catalog.

[QR Code linking to the Aquascape website.]

[QR Code linking to download the Aquascape catalog.]

Safety Information

WARNING: We recommend that you store your Aquascape 300-Watt Pond De-Icer indoors, when not in use or after the winter season. Inspect cord before using. Do not use extension cords. Take extreme caution when working on or near a frozen pond. Never walk on thin ice.

CAUTION: To provide continued protection against risk of electric shock, connect to properly grounded outlets only, using the following guidelines:

Instructions for Use

STEP ONE: Placement

We recommend floating the Aquascape 300-Watt Pond De-Icer over the deepest part of the pond. If the ice is completely frozen, laying the heater on its side will enable it to melt through the ice slowly. You may have to adjust or reorient the heater in an upright position as it starts to melt through the ice. Be patient, the heater may take several hours to completely melt through. Never break the ice with force; the shock will stress fish and could cause unnecessary fish loss. We recommend floating the heater in the pond for about one hour before plugging in the unit, allowing the unit to calibrate to the water temperature.

[Image: Two views showing placement options for the de-icer. The first shows the unit floating upright in a pond with ice. The second shows the unit placed on its side on the ice, with an arrow indicating this alternative position.]

STEP TWO: Connecting Power

Plug the electrical cord into a GFI-regulated power receptacle. The indicator light will be red when the unit is warm or heating and blue when it is cool or not heating.

[Image: A close-up of an outdoor GFCI electrical outlet with a power cord plug being inserted.]

CAUTION: When the indicator light is red, the unit will be very hot. Do not touch the unit when the indicator light is red. Make sure the unit is unplugged and given time to cool before touching.

STEP THREE: Removal and Storage

In the springtime, or when the heater is no longer needed, unplug the unit and let it sit in the pond for at least one hour to allow for proper cooling. Prior to storing the unit when not in use, we recommend that you clean the outside surface with a mild acid, like white vinegar, and then rinse thoroughly with clean tap water. This will remove calcium deposits and will not damage the stainless steel finish. Allowing calcium deposits to build up on the unit may impede the thermostat from working correctly.

[Image: The de-icer unit submerged in pond water.]

Using the Pond De-Icer with an Aeration System

If you are also using an Aquascape aeration system in addition to the Aquascape 300-Watt Pond De-Icer, place the aerator or air stone beneath the De-Icer to increase the degassing effect.

[Image: A diagram showing the de-icer unit in a pond with an aeration system's air stone and tubing positioned directly beneath it, illustrating bubbles rising for enhanced gas exchange.]

Troubleshooting

In the event that the Aquascape 300-Watt Pond De-Icer should malfunction or fail to operate, please check the following:

PLEASE NOTE: The thermostat on the heater is set to turn off at 70°F or 21°C. The thermostat or safety shut off is a safety feature and not meant to turn off the heater when ice is not present.

Additional Resources

For more information about our company or products, please visit our website at www.aquascapeinc.com or call [phone] (US) 1-866-877-6637 [phone] (CAN) 1-866-766-3426.

[QR Code linking to installation instructions from the Aquascape Pond Squad.]

Models: 39000, 300 Watt Stainless Steel Pond Deicer

File Info : application/pdf, 8 Pages, 1.32MB

PDF preview unavailable. Download the PDF instead.

aquascape-de-icer-product-manual

References

Adobe InDesign CS6 (Macintosh) Adobe PDF Library 10.0.1

Related Documents

Preview Aquascape 300-Watt Pond De-Icer: Installation, Safety, and Warranty Guide
Comprehensive guide for installing, operating, and maintaining the Aquascape 300-Watt Pond De-Icer. Includes safety warnings, troubleshooting tips, and warranty information.
Preview Aquascape Submersible Pond Filter Instructions and Maintenance
This document provides instructions and maintenance guidelines for the Aquascape Submersible Pond Filter (Item #95110). Learn how to set up and use the filter for clear pond water.
Preview Aquascape DIY Backyard Pond Kit Installation and Maintenance Guide
Comprehensive guide for installing and maintaining your Aquascape DIY Backyard Pond Kit. Learn how to create a beautiful water feature with step-by-step instructions, safety information, and maintenance tips.
Preview Aquascape AquaForce Adjustable Flow Pond Pump 4000-8000: Instructions, Maintenance, and Troubleshooting
Comprehensive guide for the Aquascape AquaForce 4000-8000 Adjustable Flow Pond Pump. Includes setup, installation, maintenance, troubleshooting, safety information, and warranty details.
Preview Aquascape Pond Filter Urn Installation and Maintenance Guide
Instructions for installing and maintaining the Aquascape Small and Large Pond Filter Urns (Item #77006, #77011). Learn how to set up the filter media, position the urn, connect to a pump, and perform regular cleaning to ensure optimal performance.
Preview Aquascape BioFalls 1000 Filter Installation and Maintenance Guide
Comprehensive instructions for installing and maintaining the Aquascape BioFalls 1000 Filter, a key component for creating beautiful waterfalls and ensuring pond water clarity. Includes parts list, recommended tools, installation steps, general maintenance, and warranty information.
Preview Aquascape Container Water Garden Filter: User Manual and Maintenance Guide
Comprehensive guide for the Aquascape Container Water Garden Filter, covering setup, operation, maintenance, troubleshooting, and warranty information. Suitable for small to medium water features up to 50 gallons.
Preview Aquascape Automatic Dosing System: Installation and Maintenance Guide
Comprehensive guide to installing, operating, and maintaining the Aquascape Automatic Dosing System for clear and healthy ponds and fountains. Includes safety, setup, and product information.