Kogan MX Vertical Advanced Ergonomic Mouse

Components

• Mouse
• USB Receiver
• Charging Cable
• User Guide

Overview

Diagram of the top-left view of the mouse. Labels point to: DIP Button, Scroll Wheel, Right Button, Charging Port, Backward Button, Forward Button, Left Button.

Note: The forward and backward buttons are not available on MacOS devices.

Diagram of the underside of the mouse. Labels point to: Mode Button, Light Button, Power Switch, Power Indicator, USB Receiver.

Operation

Mode

This mouse has 3 modes: BT1, BT2, and 2.4G.

Press the mode button to switch between the modes.

BT1 Mode (Default)

1. Move the power switch to ‘ON’. The mouse will be in BT1 mode by default and the BT1 indicator will be flashing slowly.
2. Press and hold the mode button for 3 seconds to enter Bluetooth pairing. The BT1 indicator will start rapidly flashing.
3. Ensure Bluetooth is enabled on your device. For Windows 7 or earlier, select ‘BT3.0 Mouse’ from the list of Bluetooth devices. For Windows 8 or later and MacOS, select 'BT5.0 Mouse' from the list of Bluetooth devices.

BT2 Mode

1. Press the mode button to switch the mouse to BT2 mode. The BT2 indicator light will flash slowly.
2. Press and hold the mode button for 3 seconds to enter Bluetooth pairing. The BT2 indicator will start rapidly flashing.
3. Ensure Bluetooth is enabled on your device. For Windows 7 or earlier, select ‘BT3.0 Mouse’ from the list of Bluetooth devices. For Windows 8 or later and MacOS, select 'BT5.0 Mouse' from the list of Bluetooth devices.

2.4G Mode

1. Press the mode button to switch the mouse to 2.4G mode. The 2.4G indicator will flash slowly.
2. Insert the USB receiver into the device's USB port. The mouse will pair with the device.

Power

• This mouse has a built-in 500 mA lithium battery. The battery will last 2 weeks with the RGB light on and 2 months with the RGB light off.
• The power indicator will flash rapidly when the battery is low.
• Use the provided charging cable to connect the mouse to a power adapter (not provided) or an available USB port on your computer to charge the mouse.
• The mouse will automatically enter sleep mode if it is unused for 10 minutes. Move the mouse to wake it up.

RGB Light

• Press and hold the light button for 3 seconds to turn the light on/off.
• Press the light button to switch between 4 lighting modes.

DPI

• The mouse has 5 DPI options (800/1200/1600/2400/3200).
• Press the DPI button to switch between the 5 DPI options.

Troubleshooting

BT1/BT2 Connection Problems

1. Switch the mouse off/on.
2. Switch the device's Bluetooth off/on.
3. Repeat the pairing steps for BT1 or BT2.

2.4G Connection Problems

1. Confirm the mouse is in 2.4G mode.
2. Press the left button, right button, and scroll wheel simultaneously for 3-5 seconds and release them when the 2.4G indicator flashes rapidly.
3. Insert the USB receiver into the device's USB port. The mouse will pair with the device.

Note: If connection issues persist after following the above troubleshooting steps, contact help.Kogan.com for support.

Notes

This section is for user notes.

Further Assistance

Need more information?

We hope that this user guide has given you the assistance needed for a simple set-up.

For the most up-to-date guide for your product, as well as any additional assistance you may require, head online to help.kogan.com.