Kaboodle 600mm Microwave Box

Assembly and Care Instructions

Step 1: Build and Attach Your Cabinet

Things You Need to Know

All cabinets require attachment to the wall using a minimum of 8 gauge 65mm screws for stud walls. For concrete or brick walls, consult your hardware specialist for the appropriate fixing method.
Ensure plumbing and electrical work is handled by qualified trades people.
Use exterior woodworking glue for added strength during cabinet assembly.
Identify panels by ensuring counter-sunk holes face outwards.
All holes not pre-drilled should be drilled prior to screwing using a No. 12 countersinking drill kit.
Always use safety gear, such as a mask ?, ear muffs ?, and glasses ?, when operating tools.

For any questions, contact Kaboodle Kitchen:

Australia: ? 1800 666 078 (Monday to Friday, 8:00 am - 6:00 pm AEST)

New Zealand: ? 0800 522 663 (Monday to Friday, 8:00 am - 5:00 pm NZST)

Email: ✉️ info@kaboodlegroup.com.au

Hardware Included

A: 50mm wood screws (x17) - Diagram shows multiple long wood screws.
B: 28mm wood screws (x8) - Diagram shows multiple shorter wood screws.
C: Stick-on end caps (x8) - Diagram shows multiple small circular caps.

Tools You Will Need

Cordless drill with: Number 2 screw tip, 4mm drill bit, No. 12 countersinking drill kit - Diagram shows a drill with attachments.
Tape measure ? - Diagram shows a retractable tape measure.
Pencil ✏️ - Diagram shows a pencil.
Clamps (quick release) ? - Diagram shows quick-release clamps.
Safety gear ⛑️ - Diagram shows safety equipment icons.
Adjustable square ? - Diagram shows a carpenter's square.
65mm wood screw - Diagram shows a long wood screw.
Spirit level (900mm recommended) ⚖️ - Diagram shows a long spirit level.
Wall fixing (if necessary) ? - Diagram shows wall anchors and screws.

Assembly Instructions

Assembling Cabinets

Step 1: Join the "bottom panel" to the "back panel" using screw "A".
Step 2: Attach the two "side panels" to the "back panel" using screw "A".
Step 3: Secure the "top panel" to the assembled side and back panels using screw "A".

Creating an Underbench Microwave Box

Combine the 600mm microwave box with a 600mm 1 drawer cabinet to form a 600mm underbench microwave cabinet.

Pre-drill and attach using 28mm screws ("B").

Note: Position the microwave box 18mm in front of the drawer cabinet for melamine doors, and 20mm for thermoformed doors.

Caring for Your Kaboodle Cabinets

Looking after your Kaboodle cabinets is simple and will ensure they last for many years. Follow these steps for proper care and maintenance.

Clean cabinets using an all-purpose, non-abrasive cleaner with a damp sponge or cloth. Avoid saturated cloths, harsh chemicals, or thinner-based cleaners, as these can damage the melamine surface. Do not use abrasive products like steel wool or wire brushes, and avoid sharp objects that could scratch, cut, or gouge the melamine. Exposure of the internal board may cause swelling. Kaboodle cabinets are water-resistant, not waterproof; attend to spills immediately.

Handy Hint

If the melamine surface of your cabinet is damaged, you can attempt to cover it with a furniture repair crayon. However, note that this will not restore the original finish or seal the board.

Completion Steps

Step 1: Your Kaboodle cabinet is now complete. ✔️
Step 2: Gather your parts and accessories instructions.
Step 3: Fit your doors and panels according to instructions.
Step 4: Finish your Kaboodle Kitchen by installing your benchtop.

Customer Support

Kaboodle offers a dedicated customer service line for advice and questions about Kaboodle products.

Call customer service: