Manuals+

MiBoxer SPIB5 5-in-1 SPI+DMX LED Controller

Model Number: SPIB5

Brand: MiBoxer

Product Features

Product Image Description: A compact white electronic module labeled 'MIBOXER® MiLight Subordinate New Brand' with '5 in 1 SPI+DMX LED Controller (BLE+2.4GHz)' and 'Model No.: SPIB5'. It shows input voltage, output current, RF control distance, working temperature, and mentions 'Made in China'. Terminal labels like V+, V-, GND, DATA, A, B are visible.

Product Parameters

Product NameSPI+DMX 5-in-1 LED Controller (BLE+2.4GHz)Control Distance30m
Model NumberSPIB5IP RatingIP20
Input VoltageDC 5V-24VWorking Temperature-10~40°C
Output CurrentMax 10ADimension74.5*36*17mm
Output SignalSPI(TTL): 800Kbps (Max 1024 Pixel)
DMX: 250Kbps (Max 256 Pixel)
DMX: 500Kbps (Max 512 Pixel)
DMX: 750Kbps (Max 768 Pixel)		EMC Standard (EMC)ETSI EN 301 489-1 V2.2.3
ETSI EN 301 489-17 V3.2.4
Standby Current20mASafety Standard (LVD)EN 62368-1; 2020+A11;2020
ProtocolBLE+RF 2.4GHzRadio Equipment (RED)ETSI EN 300 440 V2.2.1
AttestationCE, EMC, LVD, RED

Connection Terminals Description: The controller has input terminals labeled V+, V-, GND, DATA, A, B. It also shows output terminals for DMX and SPI signals.

Dimensions Description: The device dimensions are approximately 74.5mm (length) x 36mm (width) x 17mm (height).

Connection Diagrams

SPI Connection

SPI Installation Diagram: Shows the input terminals (SAISIR: DC5V-24V) connected to a power source (V+, V-). The output terminals are labeled SPI, with a DATA line. This setup is for SPI LED strips (single color, CCT, RGB, RGBW, RGBCCT) supporting up to 1024 pixels.

DMX Connection

DMX Installation Diagram: Similar to the SPI diagram, it shows input terminals (SAISIR: DC5V-24V) connected to power. The output terminals are labeled DMX, with A, B, and GND lines. This supports DMX control with different pixel counts: DMX 750 Kbps max. 768 pixels, DMX 500 Kbps max. 512 pixels, DMX 250 Kbps max. 256 pixels.

Note: Changing the output mode requires switching via the application.

Application Diagram

Application Diagram: Illustrates the system architecture. An APP (likely TUYA SMART) connects via BLE to the controller. The controller can also be controlled via Alexa/Google voice commands, routed through a router. The power input is shown as DC5-24V.

Compatible Remotes

Compatible Remotes (Sold Separately): Images show two remote controls: 'C9 SPI Remote' and 'B9 SPI Panel Remote'.

Pairing and Unpairing

Linking (Pairing)

  1. Turn off the device for 10 seconds, then turn it back on or briefly press the 'SET' button.
  2. Briefly press the 'ON' button 3 times within 3 seconds.
  3. The indicator light will flash green, indicating successful code pairing.

Note: If the indicator light does not flash, pairing failed. Repeat the steps. It is not possible to reconnect if the remote has already been paired.

Unlinking (Unpairing)

  1. Turn off the device for 10 seconds, then turn it back on or briefly press the 'SET' button.
  2. Briefly press the 'ON' button 5 times within 3 seconds.
  3. The indicator light will flash red, indicating successful code erasure.

Note: If the indicator light does not flash, unpairing failed. Repeat the steps. It is unnecessary to unpair if the device was never paired.

Smartphone App Control (TUYA SMART)

Network Pairing (Does not support 5G routers)

  1. Download and install the 'TUYA SMART' application from the App Store or Google Play.
  2. Search for 'TUYA SMART'. Register an account if it's your first time, or log in if you already have an account.
  3. Connect the controller to the power supply. Ensure the indicator light flashes rapidly (2 times per second).
  4. To correct the indicator light status, you have two options:
    • Long press the 'SET' button.
    • Turn the controller off and on 6 times.
  5. Connect your smartphone to a 2.4GHz Wi-Fi network.
  6. Open the TUYA SMART app, click the '+' icon.
  7. Select 'Lighting' and then 'Light Source (BLE + Wi-Fi)'.
  8. Follow the remaining on-screen instructions.

App Interface Description (Adding Device): Screenshots show the TUYA SMART app interface. The main screen displays 'Home' with weather information. Options to 'Add Device' are available. Within the 'Add Device' flow, categories like 'Electrical', 'Lighting', and 'Sensors' are shown. Selecting 'Lighting' reveals options like 'Light Source (BLE+Wi-Fi)', 'Light Source (Wi-Fi)', 'Light Source (Zigbee)', etc. The process involves selecting the correct device type and following prompts.

Function Instructions

Static Mode

Adjust or save pure static lighting settings.

App Interface Description (Static Mode): Shows controls for selecting colors (28 white colors, 80 RGB colors), adjusting brightness, width, and speed. Users can also save up to 8 scenes.

Dynamic Mode

(Selectable via the app or remote)

Features 28 white colors, 80 RGB colors, favorite modes, and 8 scenes. All modes allow adjustment of color, brightness, width, and speed.

App Interface Description (Dynamic Mode): Displays various dynamic effects like 'Colourful trailing', 'Colorful mixed trailing', 'Colourful wave', 'Colour stack', etc. Users can adjust parameters like Width, Speed, and Brightness. The app also shows options for 'Collect Scene', 'Auto', and different modes like 'Static', 'Dynamic', 'Music', 'Setting'.

Music Mode

8 types of music modes operate using the built-in microphone or the smartphone's microphone.

App Interface Description (Music Mode): Shows controls for music modes, including sensitivity adjustment for the microphone. Options for 'Timing', 'Meteor', 'Star', 'Rhythm', 'Capacity Music', 'Wave Spectrum', and 'Schedule' are visible.

Communication Protocol Definition

Configure via the application.

App Interface Description (Communication Protocol): Shows a selection screen for 'Communication Protocol' with options: 'SPI 800 kbps', 'DMX 250 kbps', 'DMX 500 kbps', 'DMX 750 kbps'. Users select the desired protocol (SPI or DMX).

LED Strip Type Setting

Modify output based on different LED strip types: single color, CCT, RGB, RGBW, RGB-B, RGB-C+CCT.

App Interface Description (LED Strip Type): Displays a selection screen for 'Strip Light Type' with options: 'Single Color', 'CCT', 'RGB', 'RGBW', 'RGB+CCT'.

Pixel Point Definition

Configure via a program.

App Interface Description (Pixel Definition): Shows a 'Points' setting where users can adjust the number of pixels using a slider. Options include 'Confirm' and '+/-' buttons.

Color Calibration

Correct LED strip color via the application.

App Interface Description (Color Calibration): Illustrates the color calibration process. Users select a current color (e.g., Red, Green, Blue, Warm White, Cool White) and use 'Previous'/'Next' buttons to adjust and 'Completed' to finish.

Startup Animation

Adjust color, color temperature, speed, and brightness.

App Interface Description (Startup Animation): Shows settings for 'Power On Animation' and 'Power In Animation', including options to 'Keep Power On Status', adjust 'Speed' and 'Brightness', and a 'Completed' button.

Timer Function

Configure via the application.

App Interface Description (Timer Function): Displays the 'RTC timer' settings. Users can set execution actions like 'turn on' or 'turn off' for specific times and choose execution cycles (e.g., 'everyday', 'once').

DND Mode Activation/Deactivation

Activate DND mode (generally used during power outages to save energy).

Voice Control Instructions

Alexa Voice Control

Please add the device in the [Tuya Smart] application, then follow the steps below:

  1. Open the Alexa application.
  2. Click 'More' (represented by three horizontal lines ☰) in the bottom right.
  3. Click 'Skills & Games'.
  4. Click the search icon (?) in the top right.
  5. Enter 'Smart Life' and search.
  6. Click on the 'Smart Life' skill, follow the instructions to complete the configuration and start voice control.

Alexa App Screenshots Description: Shows navigation within the Alexa app: 'More' menu, 'Skills & Games' section, and the search interface for 'Smart Life' skill. The search results highlight the 'Smart Life' skill with user ratings and a sample command.

Google Home Voice Control

Please add the device in the [Tuya Smart] application, then follow the steps below:

  1. Open the Google Home application.
  2. Click the '+' icon in the top left.
  3. Click 'Set up device'.
  4. Click 'Works with Google'.
  5. Click the search icon (?) in the top right.
  6. Enter 'Smart Life' and search.
  7. Click on the 'Smart Life' skill, follow the instructions to complete the configuration and start voice control.

Google Home App Screenshots Description: Shows navigation within the Google Home app: adding a device, selecting 'Set up device', then 'Works with Google', and finally searching for and linking the 'Smart Life' service.

Attention

  1. Please disconnect the power before installation.
  2. Ensure the input voltage matches the device requirements.
  3. Do not disassemble the device if you are not an expert, as it may cause damage.
  4. Do not use the lamp near metallic surfaces or strong electromagnetic waves, as this may significantly affect the remote control range.

Certifications: The product displays CE, UKCA, and RoHS compliance marks.

PDF preview unavailable. Download the PDF instead.

spib5 fr Adobe PDF library 17.00 Adobe Illustrator 28.5 (Windows)

Related Documents

Preview MiBoxer Controller LED SPI+DMX 5 in 1 (SPIB5) - Guida Completa
Guida completa al Controller LED MiBoxer SPI+DMX 5-in-1 (Modello SPIB5), che copre caratteristiche, specifiche tecniche, diagrammi di connessione, controllo tramite app TUYA e integrazione con controllo vocale Alexa e Google Home.
Preview Kontroler LED MiBOXER SPIW5 5 w 1 SPI+DMX (WiFi+2.4G) - Instrukcja i Specyfikacja
Szczegółowa instrukcja obsługi i specyfikacja techniczna kontrolera LED MiBOXER SPIW5. Dowiedz się o funkcjach SPI, DMX, sterowaniu przez WiFi i 2.4G, trybach dynamicznych, muzycznych oraz integracji z aplikacją Tuya Smart, Alexa i Google Home.
Preview MiBoxer SPIB5 5-in-1 SPI+DMX LED Controller with BLE+2.4G: Features, Setup, and App Control
Comprehensive guide to the MiBoxer SPIB5 5-in-1 SPI+DMX LED Controller, detailing its features, technical specifications, connection diagrams, app control via TUYA SMART, and voice control integration with Alexa and Google Home.
Preview MiBoxer SPIW5 5-in-1 SPI+DMX LED Controller: Features, Setup, and App Control Guide
A comprehensive guide to the MiBoxer SPIW5 5-in-1 SPI+DMX LED Controller. Learn about its features, technical specifications, connection methods, remote pairing, Tuya Smart app control, and voice assistant integration with Alexa and Google Home.
Preview MIBOXER SPIW5 5-in-1 SPI+DMX LED Controller | WiFi & 2.4GHz Smart Control
Discover the MIBOXER SPIW5, a versatile 5-in-1 LED controller supporting SPI and DMX protocols with WiFi and 2.4GHz connectivity. Control single color, CCT, RGB, RGBW, and RGBCCT LED strips via app or voice assistants. Features dynamic modes, music sync, and timer functions.
Preview MiBoxer SPIW5 5-in-1 SPI+DMX LED Controller User Manual
Comprehensive guide to the MiBoxer SPIW5 5-in-1 SPI+DMX LED controller, detailing its features, technical specifications, connection methods, smartphone app control via Tuya Smart, voice assistant integration with Alexa and Google Home, and setup procedures.
Preview MiBoxer Mi-Light SPIW5 5-in-1 SPI+DMX LED Controller Handbuch
Umfassendes Benutzerhandbuch für den MiBoxer Mi-Light SPIW5 5-in-1 SPI+DMX LED-Controller, das Funktionen, Spezifikationen, Installation, App-Steuerung über TUYA SMART und Sprachassistentenintegration mit Alexa und Google Home detailliert beschreibt.
Preview MIBOXER SPIW5 5-in-1 SPI+DMX LED Controller (WiFi+2.4G) User Manual
User manual for the MIBOXER SPIW5, a versatile 5-in-1 SPI+DMX LED controller. Learn about its features, installation, connectivity, app control via TUYA SMART, and voice commands with Alexa and Google Home. Supports WiFi and 2.4G wireless technology.