Quick Start Guide: Turtle Beach Stealth 700 Gen 2 Wireless Gaming Headset

• Stealth™ 700 Gen 2 Headset
• Stealth™ 700 Gen 2 Mini Wireless Transmitter
• USB-C Charging Cable

Overview of Controls:

• USB Charge & Update Port: USB-C port for charging and firmware updates.
• LED Indicator: Shows headset status.
• Bluetooth® Multi-Function Button: Used for Bluetooth® setup.
• Power Button: Press for 2 seconds to power on/off. Press for 6 seconds to enter Bluetooth® pairing mode.
• Master Volume Dial: Controls the volume of incoming game audio.
• Mic Monitoring Dial: Adjusts the volume of your voice heard in the headset.
• Microphone Mute: Flip the microphone up to mute. There is an audible tone when the mic is muted or unmuted.
• Mappable Wheel: Assignable to a new function via the Turtle Beach Audio Hub mobile app.
• MODE Button: Assignable to a new function via the Turtle Beach Audio Hub mobile app. Quickly pressing the MODE button activates Superhuman Hearing™ Mode, which enhances critical in-game audio cues like enemy footsteps and weapon reloads.

EQ Presets (Customizable via Audio Hub App):

The Stealth™ 700 Gen 2 provides up to 20 hours of rechargeable battery life. Ensure to charge it regularly before storing.

Connect the USB-C charging cable from the headset's USB Charge & Update Port to a USB power source.

The MODE Button and Mappable Wheel can be assigned to a new function based on your gaming style. To change the button's assignment, follow these steps:

1. Download the Turtle Beach Audio Hub mobile app on your iOS or Android device.
2. Enable Bluetooth® on your selected device, and pair with your headset to access the app.
3. Swipe to the second screen in the app to assign new functions.

1. Connect the Mini Transmitter to a USB port on your PlayStation® console. The transmitter LED will be solid blue when successfully paired.
2. Power on the headset by pressing the Power Button for 2 seconds. The headset LED will be solid blue when successfully paired.
3. On your PlayStation®, go to Settings > Devices > Audio Devices.
   1. Select "Stealth™ 700 Gen 2" for Input & Output Device.
   2. Set "Output to Headphones" to "All Audio".
   3. Set "Volume Control (Headphones)" level to maximum.
   4. Adjust "Microphone Volume" and follow on-screen instructions to calibrate your microphone.

The headset and transmitter are paired out of the box, indicated by a solid LED on the transmitter. If your transmitter's LED is double-blinking, follow the pairing steps in the Bluetooth® setup section.

Your Stealth™ 700 Gen 2 headset will enter Bluetooth® pairing mode once powered on. If not, hold the Power Button for 6 seconds until the "Bluetooth Pairing" prompt plays. To pair your headset into Bluetooth® pairing mode, follow these steps:

1. Hold down the Power Button for 6 seconds until the "Bluetooth Pairing" prompt plays.
2. Connect to your headphones in your phone or tablet Bluetooth® settings.

Transmitter LED Indicator:

Headset LED Indicator:

Always charge your headset before storing it for any extended period of time (greater than 3 months). Never store the unit in temperatures above 113°F/45°C.

Play/Pause

Press Once

Skip Forward

Press Twice Quickly

Fast Forward

Press Twice Quickly and Hold

Skip Back

Press Three Times Quickly

Rewind

Press Three Times Quickly and Hold

Answer Call

Press Once

End Call

Press Once

Incoming Call

Press and Hold

Activate Voice Recognition

Press and Hold

Local Restrictions on Radio Usage:

Due to the fact that the frequency bands used by wireless devices may not yet be harmonized in all countries, these radio products are designed for use only in specific countries, and are not allowed to be operated in countries other than those of intended use. As a user of these products, you are responsible for ensuring that the products are used only in the countries for which they were intended and for verifying that they are configured with the correct selection of frequency and channel for the country of use. Any deviation from the permissible power and frequency settings for the country of use is a violation of national law and may be punished as such.

To determine whether you are allowed to use your wireless network device in a specific country, please check the URL: turtlebeach.com/homologation or contact Turtle Beach directly.

FCC Compliance Statement:

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

RF Radiation Exposure & Hazard Statement:

To comply with FCC RF exposure requirements, this device must be installed to allow a separation distance of at least 20 cm (8 in) from all persons. Higher gain antennas and types of antennas not covered under the FCC Part 15 certification are not allowed. Co-location with other transmitters is not allowed.

European Union and European Fair Trade Association Regulatory Compliance:

This equipment may be operated in the countries that comprise the member countries of the European Union and the European Fair Trade Association. These countries include: AUSTRIA, BELGIUM, BULGARIA, CYPRUS, CZECH REPUBLIC, DENMARK, ESTONIA, FINLAND, FRANCE, GERMANY, GREECE, HUNGARY, IRELAND, ITALY, LATVIA, LITHUANIA, LUXEMBOURG, MALTA, NETHERLANDS, POLAND, PORTUGAL, ROMANIA, SLOVAKIA, SLOVENIA, SPAIN, SWEDEN, UNITED KINGDOM, ICELAND, LIECHTENSTEIN, NORWAY, SWITZERLAND.

Declaration of Conformity:

This device complies with the essential requirements of the Radio Equipment Directive (RED) of the European Union (2014/53/EU).

To access the rating label:

Remove the left ear pad. Pull the almohadilla izquierda.

Place ear cushion back onto the silver ring of your headset. Ensure cushion is not snagged.

For the latest Tech Support information, visit turtlebeach.com/support.

For Spanish support, visit es.turtlebeach.com/pages/servicio-asistencia.