Stealth 700 Gen 2 Xbox - Quick Start Guide

Package Contents

The package includes:

• Stealth 700 Gen 2 Xbox Headset (A)
• USB-C Charging Cable (B)

Illustration shows the Stealth 700 Gen 2 Xbox headset and a USB-C charging cable.

Important

Please make sure your headset is updated with the latest firmware.

Headset Controls

Diagram of the headset showing various controls: USB Charge & Update Port, LED Indicator, Connect Button, Bluetooth® Multi-Function Button, Power Button (Press 2s = Power On/Off), Mode Button (Default: Superhuman Hearing On/Off, Remappable), Mappable Wheel (Default: Chat Volume Wheel, Remappable), Game Volume Dial.

Control List

• 1. USB Charge & Update Port: For charging and firmware updates.
• 2. LED Indicator: See legend for status.
• 3. Connect Button: Used for pairing.
• 4. Bluetooth® Multi-Function Button: Refer to Bluetooth® setup.
• 5. Power Button: Press and hold for 2 seconds to power on/off.
• 6. Mode Button: Default function is Superhuman Hearing On/Off, remappable via mobile app.
• 7. Mappable Wheel: Default function is Chat Volume Wheel, remappable via mobile app.
• 8. Game Volume Dial: Adjusts game volume.

Superhuman Hearing and Mic Mute

Use Superhuman Hearing Mode to pinpoint quiet audio cues like enemy footsteps and weapon reloads. During gameplay, activate and deactivate Superhuman Hearing by pressing the Mode button once, quickly.

Mic Mute

Illustration shows three states of the microphone: Mic Unmuted (Micro active), Mic Muted (Micro désactivé), Mic Muted (Micro désactivé). Flip up the microphone to mute. An audible tone indicates mute status (high low for muted, low high for unmuted).

EQ Presets

EQ Presets are available through the Turtle Beach Audio Hub mobile app. The EQ Presets include:

• Signature Sound
• Bass Boost
• Bass + Treble Boost
• Vocal Boost

Charging and Storage

The Stealth 700 Gen 2 Xbox headset provides up to 20 hours of rechargeable battery life. Charge it regularly and before storing.

Diagram shows the headset (A) connected via USB-C cable (B) to a console (Console). A close-up shows the USB port on the headset.

Headset Storage

Always charge your headset before storing it for extended periods (over 3 months). Do not store the unit in temperatures above 113°F (45°C).

Setup for Xbox

Pairing with Xbox Console

Step 1: Power On Headset

Press and hold the Power button on the headset to turn it on.

Illustration shows a finger pressing the Power button on the headset.

Step 2: Initiate Pairing

Press the Enroll button on the console. Then, press and hold the Connect button on the headset. Both LEDs should start to flash rapidly.

Illustration shows a finger pressing the Enroll button on the console and then pressing and holding the Connect button on the headset, with a timer indicating 3 seconds.

Step 3: Pairing Confirmation

Within a few seconds, the LEDs on both the headset and console will turn solid, indicating successful pairing.

Illustration shows the headset and console with solid LEDs, and a checkmark icon, indicating successful pairing.

Surround Sound Setup (Xbox Only)

1. Go to Settings >> General >> Volume & Audio Output.
2. Set Headset Audio to Windows Sonic For Headphones.

Bluetooth Pairing

Your Stealth 700 Gen 2 will enter Bluetooth pairing mode once powered on. If no Bluetooth connection is made within 2 minutes, pairing mode will stop. To re-enter Bluetooth pairing mode:

• Hold down the Bluetooth button on your headset until the "Bluetooth Pairing" prompt plays.
• Select the headset in your phone or tablet's Bluetooth settings. The headset and device will pair via Bluetooth.

Illustration shows a finger pressing the Bluetooth button on the headset, with Bluetooth connection symbols indicating pairing with a tablet and a phone.

Media Controls

Function and Action Mapping

LED Indicators

Diagram of the headset with a close-up on the LED indicator area.

Headset LED Meanings

Mappable Buttons

Illustrations show the Mode button and the Mappable Wheel.

The Mode Button and Mappable Wheel can be assigned new functions based on your gaming style. To change assignments:

• Download the Turtle Beach Audio Hub mobile app (iOS or Android).
• Enable Bluetooth on your device and pair with your headset.
• Navigate to the second settings screen in the app to assign new functions.
• Your headset will save the configuration once selected.

Setup for PC Use

Syncing Your Headset (Xbox Wireless Adapter)

Note: Xbox Wireless Adapter is not included and sold separately.

Step 1: Connect Adapter

Plug the Xbox Wireless Adapter into a free USB port on your computer.

Illustration shows a computer, a USB port, and the Xbox Wireless Adapter.

Then, power on the headset by pressing and holding the Power button.

Step 2: Initiate Sync

Press and hold the Enroll button on the Adapter until its LED flashes. Then, press and hold the Connect button on the headset until its LED flashes.

Illustration shows a finger pressing the Adapter's Enroll button and then the headset's Connect button, with a 3-second timer.

Step 3: Sync Confirmation

Within seconds, the LEDs on both the headset and Adapter will turn solid, indicating successful syncing.

Illustration shows the headset and Adapter with solid LEDs, and a checkmark icon, indicating successful sync.

Volume is controlled via Windows and the headset. For more information, refer to PC volume control guides.

Syncing Your Headset (Built-in Xbox Wireless)

1. On your PC, go to Settings >> Devices >> Connected Devices.
2. Choose 'Add Bluetooth Or Other Device'. Windows will search for the headset. Select 'Everything Else'.
3. Press the Connect button on your headset. Windows will find and add the headset.
4. Your Stealth 700 Gen 2 headset will appear in the list under 'Other Devices' when ready to use.

Configuring Your Settings

1. On the Windows Taskbar, right-click the Speaker icon and select Playback Devices.
2. Set Turtle Beach Stealth 700 Gen 2 as your Default Device.
3. Select Recording Devices.
4. Set Turtle Beach Stealth 700 Gen 2 as your Default Device.