Grundig TV Service Manual

Models: CUC 2030 F, ST 70-860 FR/TOP, CUC 2059 F, MW 70-2690 FR/TOP

Introduction and Safety Information

This service manual provides essential information for the maintenance of Grundig color television receivers. It is crucial to observe all recommendations and safety instructions outlined in the 'Safety' Service Manual (Part Number 72010-800.00) and any country-specific regulations.

For the television receivers specified on the front page, refer to the Service Manual CUC 2030 F / CUC 2031 F. This manual details the differences and additional modules fitted to these TV receivers. A list of individual modules and their relevant part numbers can be found in the tables on page 4.

Basic instructions for servicing are provided in the following documents:

  • Service Manual CUC 2030 F / CUC 2031 F (Part No. 72010 020 8000)
  • 2nd Supplement CUC 2080 F (Part No. 72010 020 8200)
  • Safety Instructions (Part No. 72010 800 0000)

Due to the conversion of the EDP system, previous 10-digit part numbers have changed to 12-digit numbers. For example, a previous part number like 29504-111.22 is now 29504 111 2200. During this transition period, both forms may appear in the Service Manual.

Spare Parts Lists

The four-figure designation in the spare parts refers to the last four figures of the part numbers of the chassis or modules. For example: 3100 ⇨ 29704 004 3100.

Table of Contents

TopicPage
Technical Data3
Module List4
List of Modules - Service Manual with Supplements5
BSO Board5
UG2 - Panorama View6
Spare Parts Lists7

General Section Contact Information

Test equipment can be ordered from Grundig's service organization or through the address provided below. Some test equipment may already be available on the market.

Grundig France
5, Bld Marcel Pourtout
92563 RUEIL MALMAISON Cedex
Tel: 01 41 39 26 26
Telefax: 01 47 08 69 48
eMail: instruments@grundig.de
Internet: http://www.grundig-instruments.de

Technical Data

CharacteristicST 70-860 FR / TOP (CUC 2030 F)MW 70-2690 FR / DPL (CUC 2059 F)
Picture Tube
Visible picture size66cm66cm
Screen diagonal70cm (28") Black Line S70cm (28") Megatron, Super Flat, Black Matrix, CCS, Invar
Deflection angle110°106°
Vertical frequency50Hz50Hz
Electronic
Programmable positions79 TV + 3 AV99 TV + 3 AV
AV evaluationProgrammable for every program position
TunerPLL frequency synthesizer tuning UHF/VHF
TV-StandardPAL, SECAM, NTSC 4.43MHz, B/G, L/L', I (MONO)PAL, SECAM, NTSC 4.43MHz, B/G, L/L', I (MONO)
Stereo systemsGerman A2 for B/G, Nicam 5.85MHzGerman A2 for B/G, Nicam 5.85MHz
Teletext8 pages TOP / FLOF-text, VPS
Music powerStereo 2 x 8WStereo 2 x 20W
Front Connections
HeadphonesStereo 3.5mm jack, adjustable volume, individual channel selection with dual-sound broadcasts
Video IN1 x Cinch1 x Cinch
Audio IN2 x Cinch2 x Cinch
Rear Panel Connections
Euro AV 1 (black)FBAS in-/output, SBAS input, RGB inputFBAS in-/output, SBAS input, RGB input, MicroSat remote control (Pin 8)
Euro AV 2 (black)FBAS in-/output, SBAS input, RGB input, MicroSat remote control (Pin 8)FBAS in-/output, SBAS input, RGB input
Mains Stage
Mains voltage (variable)165...265V165...265V
Mains frequency50 / 60Hz50 / 60Hz
Power consumption (normal)approx. 75Wapprox. 75W
Standby consumptionapprox. 5Wapprox. 5W

Module List

ModulePart NumberCUC 2030 F (ST 70-860 FR/TOP)CUC 2059 F (MW 70-2690 FR/TOP)
Chassis29704 003 0300G.CH 1172 FBG.CH 1275 FB
Tuner PLL29504 301 0100
WW. 81406 016 1200
Control Unit Module29501 082 5900-
Socket Board C.I.29305 008 3700-
CRT Panel C.I.29305 122 1600
29305 122 2100

-
Subpanel for Colour Module C.I. additional29305 119 4200-
Feature Board CTI/LTI C.I.29305 119 3500-
PIP Module29504 106 5100(retrofittable)(retrofittable)
Keyboard29501 083 2500-
Mains Switch Panel C.I.29305 165 7100-
BSO Board C.I.29305 119 4400
UG2 - Panorama View29305 119 6800-
Processor Panel C.I.29305 119 4000
29305 119 7200

-
-
Dolby Surround Board C.I.29504 104 7700-(retrofittable)
TP 71529642 062 1100
TP 80029642 061 0100-
SAT-Module(retrofittable)

List of Modules – Service Manual with Supplements

ModuleModule Part NumberService Manual CUC 2030 F / CUC 2031 F (72010 020 8000)Supplement 2 CUC 2080 F (72010 020 8200)Supplement 3 CUC 2030 F / CUC 2059 F (72010 020 8300)
Control Unit Module29501 082 5900Page 3 - 27
Socket Board C.I.29305 008 3700Page 3 - 30
CRT Panel C.I.29305 122 1600
29305 122 2100
Page 3 - 11Page 35
Subpanel for Colour Module C.I. additional29305 119 4200Page 3 - 24
Feature Board CTI/LTI C.I.29305 119 3500Page 32
PIP Module29504 106 5100Page 3 - 37
Keyboard29501 083 2500Page 3 - 28
Mains Switch Panel C.I.29305 165 7100Page 3 - 32
BSO Board C.I.29305 119 4400Page 5
UG2 - Panorama View29305 119 6800Page 6
Processor Panel C.I.29305 119 4600
29305 119 7200
Page 42
Page 42
Dolby Surround Board C.I.29504 104 7700Page 45

C.I. BSO / BSO Board 29305 119 4400

This section illustrates the BSO board (Part Number 29305-119.44) with diagrams for both the component side (top view) and solder side (bottom view). The diagrams show the layout of various electronic components including resistors (e.g., R50030, R50032, R50033, R50034), capacitors (e.g., C50030, C50031, C50032), transistors (T50030), and diodes (D50030). Key connection points and test points are also indicated, providing a visual guide for technicians working on the board.

UG2 - Panorama View 29305 119 6800

This section provides a panoramic view of the UG2 module (Part Number 29305-119.68) and UG2-SHIFT (Part Number 29305-119.43), including circuit diagrams and PCB layouts. The circuit diagram is divided into Block A and Block B, illustrating signal paths and component interconnections. Key components shown include optocouplers (OK64103), transistors (T64101, T64108), diodes (D5021, D5022, D5023, D5024), resistors, and capacitors. The diagrams also show connections to the CRT panel and other modules, providing a comprehensive overview of the UG2 module's functionality and physical layout for both component and solder sides.

Spare Parts Lists

This section provides detailed lists of spare parts for the Grundig TV models, including part numbers, descriptions, and applicability for different chassis versions. The lists are organized by position number and include various components such as chassis parts, electronic modules, and individual components like resistors, capacitors, diodes, and integrated circuits.

Example Parts List Entries (ST 70-860 FR/TOP)

Pos. No.Part NumberDescription
0200.00029635 249 0100Front Housing Complete
0250.00029501 688 0200Mains Button
1100.00083000 304 3500Picture Tube A66EAK71X01/A66EAK
1300.00029501 082 5900Control Unit
2400.00029642 062 1100Remote Control TP 715

Example Parts List Entries (MW 70-2690 FR/TOP)

Pos. No.Part NumberDescription
0200.00029625 799 0100Front Housing Complete
0250.00029501 696 0100Button with Light Guide
1100.00083000 662 0200Picture Tube W66ESF202X13 PHI
1900.00029305 165 7100Mains Switch Panel C.I.
2400.00029642 061 0100Remote Control TP 800

The regulations and safety instructions shall be valid as provided by the 'Safety' Service Manual, part number 72010-800.00, as well as the respective national deviations.

PDF preview unavailable. Download the PDF instead.

14016 Acrobat Distiller 3.01 für Power Macintosh PageMaker 6.5

Related Documents

Preview Grundig TV Service Manual for CUC 2050 N and 2080 N Models
Comprehensive service manual for Grundig CUC 2050 N and 2080 N television models, including technical specifications, module lists, circuit diagrams, and detailed spare parts information for repair and maintenance.
Preview Grundig CUC 7303 FR TV Service Manual: Technical Data, Diagrams, and Parts List
Comprehensive service manual for the Grundig CUC 7303 FR TV, including detailed technical specifications, module lists, test equipment requirements, component coordinates for PCBs, oscillograms, general circuit diagrams, CRT panel schematics, and a complete spare parts list. Essential for TV repair and maintenance.
Preview Grundig TV Service Manual for CUC 2030 N - 2080 N Series
Comprehensive service manual for Grundig CUC 2030 N to 2080 N series televisions, providing detailed alignment procedures, technical specifications, module lists, and spare parts information for various TV models including ST, Greenville, Melbourne, and MW series.
Preview Grundig CUC 2030 F & CUC 2031 F Service Manual
Comprehensive service manual for Grundig CUC 2030 F and CUC 2031 F televisions, including technical data, circuit diagrams, component layouts, and alignment procedures.
Preview Grundig CUC 2030 N to CUC 2080 N Series TV Service Manual
Comprehensive service manual for Grundig CUC 2030 N, CUC 2050 N, CUC 2058 N, CUC 2059 N, and CUC 2080 N series televisions, including technical data, circuit diagrams, spare parts lists, and alignment procedures.
Preview Grundig TVR Series Service Manual - Technical Overview and Spare Parts
Comprehensive service manual for Grundig TVR 37xx, TVR 51xx, and TVR 55xx series televisions and VCRs, including detailed technical specifications, circuit diagrams, PCB layouts, and complete spare parts lists for maintenance and repair.
Preview Grundig TV Service Manual for CUC 1952, CUC 1983, CUC 1984, MW 70-269, MW 82-100/9, Denver SE 82-100 PALplus Models
Comprehensive service manual for Grundig CUC 1952, CUC 1983, CUC 1984, MW 70-269 PALplus, MW 82-100/9 PALplus, MW 82-100/9, and Denver SE 82-100 PALplus TV models. Includes technical specifications, module overviews, PCB layouts, circuit diagrams, and spare parts lists for repair and maintenance.
Preview Grundig CUC 1825/1826 Service Manual
Comprehensive service manual for Grundig CUC 1825 and CUC 1826 televisions, detailing technical specifications, module lists, circuit diagrams, troubleshooting, and spare parts.