Ubiquiti UDM-Pro-Max: Safety and Compliance Information

General Safety Notices

Please read, follow, and keep these instructions. Heed all warnings. Use only attachments/accessories specified by the manufacturer.

WARNING: Failure to provide proper ventilation may cause fire hazard. Keep at least 20 mm of clearance next to the ventilation holes for adequate airflow.
WARNING: To reduce the risk of fire or electric shock, do not expose this product to rain or moisture.
WARNING: Do not use this product in a location that can be submerged by water.
WARNING: Avoid using this product during an electrical storm. There may be a remote risk of electric shock from lightning.
WARNING: Use only IEC/EN 60825-1:2014 Class I SFP Modules, and for safety ensure not to look directly into fiber cable ends.
WARNING: To maintain safety and ensure fire safety, hard drive trays with or without hard drives must be installed at all times.

Battery Warning (if applicable)

Do not expose cells or batteries to heat or fire. Avoid storage in direct sunlight.
Purchase battery recommended by manufacturer. Risk of explosion if replaced with incorrect type.

Electrical Safety Information

Compliance is required with respect to voltage, frequency, and current requirements indicated on the manufacturer’s label. Connection to a different power source than those specified may result in improper operation, damage to the equipment, or pose a fire hazard if the limitations are not followed.
There are no operator serviceable parts inside this equipment. Service should be provided only by a qualified service technician.
This equipment is provided with a detachable power cord which has an integral safety ground wire intended for connection to a grounded safety outlet.
- Do not substitute the power cord with one that is not the provided approved type. Never use an adapter plug to connect to a 2-wire outlet as this will defeat the continuity of the grounding wire.
- The equipment requires the use of the ground wire as a part of the safety certification; modification or misuse can provide a shock hazard that can result in serious injury or death.
- Contact a qualified electrician or the manufacturer if there are questions about the installation prior to connecting the equipment.
- Protective earthing is provided by the listed AC adapter. Building installation shall provide appropriate short-circuit backup protection.
- Protective bonding must be installed in accordance with local national wiring rules and regulations.

Radiation Exposure Statement

This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Technical Specifications

Operating Frequency (MHz): 2400-2483.5
Max. RF Output Power: ≤ 20 dBm

Declaration of Conformity

Hereby, UBIQUITI, declares that this device, UDM-Pro-Max, is in compliance with the essential requirements and other relevant provisions of the following directives:

EU Directives: 2014/53/EU, 2014/30/EU, 2014/35/EU
UK Regulations: Radio Equipment Regulations 2017, Electromagnetic Compatibility Regulations 2016, and Electrical Equipment (Safety) Regulations 2016

The device has software that cannot affect conformity, even if the software is changed or replaced. The full text of the EU and UK declarations of conformity and detailed compliance information are available at: ui.com/compliance

Manufacturer: Ubiquiti International Holding B.V., Ekkersrijt 3102, Son, Netherlands

UK Importer: Ubiquiti Distribution UK Limited, 2 New Street Square, London, United Kingdom

	Ubiquiti USW-Pro-Max-24: Safety and Compliance Information Essential safety notices, electrical safety guidelines, and declaration of conformity for the Ubiquiti USW-Pro-Max-24 network switch, presented in a concise and accessible HTML format.
	Ubiquiti UCG-Max Safety and Compliance Information Comprehensive safety notices, electrical safety guidelines, radiation exposure information, and declarations of conformity for the Ubiquiti UCG-Max network device.
	Ubiquiti UniFi Switch Pro Max 48 PoE Safety and Compliance Information This document provides essential safety notices, electrical safety information, and the Declaration of Conformity for the Ubiquiti UniFi Switch Pro Max 48 PoE (USW-Pro-Max-48-PoE). It covers warnings regarding ventilation, exposure to elements, and proper usage, along with electrical safety guidelines and compliance statements for EU and UK regulations.
	Ubiquiti UCG-Ultra User Guide and Safety Information This document provides safety notices, electrical safety information, and compliance declarations for the Ubiquiti UCG-Ultra device. It includes operating frequency and RF output power details, along with declarations of conformity for various regions.
	Ubiquiti U7-Pro-Max Safety and Compliance Information This document provides essential safety, electrical safety, and radiation exposure information for the Ubiquiti U7-Pro-Max device, along with the Declaration of Conformity.
	Ubiquiti UA-Ultra Safety and Compliance Information This document provides essential safety, electrical, and radiation exposure information for the Ubiquiti UA-Ultra device, along with its Declaration of Conformity.
	Ubiquiti UAP-AC-Pro Installation and Safety Guide This document provides safety instructions, electrical safety information, radiation exposure statements, and declarations of conformity for the Ubiquiti UAP-AC-Pro access point.
	Ubiquiti UniFi Dream Machine Pro (UDM-Pro) Quick Start Guide Comprehensive guide to installing, configuring, and understanding the Ubiquiti UniFi Dream Machine Pro (UDM-Pro) network gateway, including hardware overview, specifications, and safety information.