Eufy Smart Lock E31 Quick Start Guide

Setting Up the System

Follow these steps to set up your Eufy Smart Lock E31:

1. Download and install the eufy Security app. Sign up for an account. You can find the app on the App Store or Google Play.
2. Follow the in-app instructions to add the Eufy Smart Lock E31 to your device list.

For online support, tutorial videos, FAQs, and more information, please visit http://support.eufy.com/s/.

Notice

Operating Environment:

• Do not use the device in environments with excessively high or low temperatures.
• Avoid exposing the device to strong sunshine or very wet conditions.
• Suitable temperature range: -10°C to 50°C (14°F to 122°F) for the interior lock, and -30°C to 70°C (-22°F to 158°F) for the exterior lock.
• When powering the device, use it in an environment with normal room temperature and good ventilation.
• Recommended temperature range for powering the device: 5°C to 25°C (41°F to 77°F).
• The equipment is suitable for mounting at heights of 2 meters or less.

Usage Guidelines:

• Do not use the equipment in any way not described herein to avoid personal injury or property damage.
• Users must comply with the laws and regulations of the countries and regions where the equipment is used.
• Abide by professional ethics and safety obligations.
• Strictly prohibit the use of Eufy products or equipment for any illegal purposes. Eufy Innovations Limited is not responsible for any legal liability of violators.

Warning: Battery Safety

Risk of Explosion!

• Replacing a battery with an incorrect type may bypass safeguards and create danger.
• Disposing of a battery in fire or a hot oven, or mechanically crushing or cutting it, may result in an explosion or leakage of flammable liquids or gases.
• Leaving a battery in an extremely hot environment may result in an explosion or leakage of flammable liquids or gases.
• Subjecting a battery to extremely low air pressure may result in an explosion or leakage of flammable liquids or gases.

Disposal: Dispose of used batteries according to their instructions.

French Warning: ATTENTION! RISQUE D'EXPLOSION SI LA BATTERIE EST REMPLACÉE PAR UN TYPE INCORRECT. ÉLIMINER LES BATTERIES USÉES SELON LES INSTRUCTIONS.

Regulatory Information

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC Radio Frequency Exposure Statement

The device has been evaluated to meet general RF exposure requirements. The device can be used in fixed/mobile exposure conditions. The minimum separation distance is 20cm.

Importer Information (US/Canada)

Company Name: POWER MOBILE LIFE, LLC

Address: 10900 NE 8th St, Ste 501, Bellevue WA 98004

Telephone: 1-800-988-7973

IC Statement

This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.

French Statement: Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes: (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.

This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.

IC Radiation Exposure Statement

When using the product, maintain a distance of 20cm from the body to ensure compliance with RF exposure requirements. French: Lors de l'utilisation du produit, maintenez une distance de 20 cm du corps afin de vous conformer aux exigences en matière d'exposition RF.

Environmental Compliance

Your product is designed and manufactured with high quality materials and components, which can be recycled and reused. This symbol ♻️ means the product must not be discarded as household waste, and should be delivered to an appropriate collection facility for recycling. Proper disposal and recycling helps protect natural resources, human health and the environment. For more information on disposal and recycling of this product, contact your local municipality, disposal service, or the shop where you bought this product.

European Community Compliance

This product complies with the radio interference requirements of the European Community.

Declaration of Conformity

Anker Innovations Limited declares that this device is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. For the declaration of conformity, visit: https://support.eufy.com/s/articleRecommend?type=DownLoad&secondType=doc.

RF Exposure Information

The Maximum Permissible Exposure (MPE) level has been calculated based on a distance of 20 cm between the device and the human body. To maintain compliance with RF exposure requirements, use the product while maintaining a 20cm distance between the device and the human body.

Customer Service

Warranty: 18-month limited warranty

Contact:

• (US/Canada): +1 (800) 988-7973
• (AU): +61 3 8331 4800
• Email: support@eufy.com
• AU Email: service@myeufy.com.au

Company Address: Anker Innovations Limited, Unit 56, 8th Floor, Tower 2, Admiralty Centre, 18 Harcourt Road, Hong Kong

Social Media: f X @EufyOfficial

Model: T85F0

Document Version: 51005004981 V1