eufy Smart Lock E30 Quick Start Guide
This guide provides essential information for setting up and using your eufy Smart Lock E30.
Setting Up the System
- Download and install the eufy Security app, then sign up for an account.
- Follow the in-app instructions to add the eufy Smart Lock E30 to your device list.
For online support, tutorial videos, FAQs, and more information, please visit http://support.eufy.com/s/.
Notice
- Do not use the device in environments with excessively high or low temperatures. Never expose the device to strong sunshine or very wet conditions.
- The suitable operating temperature for the interior lock is -10°C to 50°C (14°F to 122°F), and for the exterior lock is -30°C to 70°C (-22°F to 158°F).
- When powering the device, place it in an environment with normal room temperature and good ventilation.
- It is recommended to operate the device in an environment with a temperature ranging from 5°C to 25°C (41°F to 77°F).
- The equipment is suitable for mounting at heights up to 2 meters.
- Do not use the equipment in any way other than described herein to avoid personal injury or property damage.
- Users must comply with the laws and regulations of the countries and regions where the equipment is located and used. Users must abide by professional ethics, pay attention to safety obligations, and strictly prohibit the use of eufy products or equipment for any illegal purposes. Anker Innovations Limited will not be responsible for any legal liability arising from violations.
Warning
- Replacing a battery with an incorrect type may bypass safeguards and create danger.
- Disposing of a battery in a fire or a hot oven, or other source of significant heat, or mechanically crushing or cutting the battery, may result in an explosion or leakage of flammable liquids or gases.
- Leaving the battery in an extremely hot environment may result in an explosion or leakage of flammable liquids or gases.
- Subjecting the battery to extremely low air pressure may result in an explosion or leakage of flammable liquids or gases.
Attention
- Le remplacement d'une batterie par un type incorrect peut contourner les protections et créer un danger.
- L'élimination d'une pile dans un feu ou une autre source de chaleur importante, ou par écrasement ou découpage, peut entraîner une explosion ainsi qu'une fuite de liquides et de gaz inflammables.
- Le fait de laisser une batterie dans un environnement extrêmement chaud peut entraîner une explosion ainsi qu'une fuite de liquides et de gaz inflammables.
- Une batterie soumise à une pression d'air extrêmement faible peut provoquer une explosion ainsi qu'une fuite de liquides et de gaz inflammables.
CAUTION! There is a risk of explosion if an incorrect battery type is used. Dispose of used batteries according to their instructions.
ATTENTION! Risque d'explosion si la batterie est remplacée par un type incorrect. Éliminer les batteries usées selon les instructions.
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Radio Frequency Exposure Statement
The device has been evaluated to meet general RF exposure requirements. The device can be used in fixed/mobile exposure conditions. The minimum separation distance is 20cm.
Importer Information (US/Canada)
Company Name: POWER MOBILE LIFE, LLC
Address: 10900 NE 8th St, Ste 501, Bellevue WA 98004
Telephone: 1-800-988-7973
IC Statement
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes: (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.
This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
IC Radiation Exposure Statement
When using the product, maintain a distance of 20cm from the body to ensure compliance with RF exposure requirements. Lors de l'utilisation du produit, maintenez une distance de 20 cm du corps afin de vous conformer aux exigences en matière d'exposition RF.
Product Sustainability
Your product is designed and manufactured with high quality materials and components, which can be recycled and reused.
This symbol ♻️ means the product must not be discarded as household waste, and should be delivered to an appropriate collection facility for recycling. Proper disposal and recycling helps protect natural resources, human health and the environment. For more information on disposal and recycling of this product, contact your local municipality, disposal service, or the shop where you bought this product.
This product complies with the radio interference requirements of the European Community.
Declaration of Conformity
Hereby, Anker Innovations Limited declares that this device is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. For the declaration of conformity, visit the web site: https://support.eufy.com/s/articleRecommend?type=DownLoad&secondType=doc.
RF Exposure Information
The Maximum Permissible Exposure (MPE) level has been calculated based on a distance of d=20 cm between the device and the human body. To maintain compliance with RF exposure requirement, use product that maintain a 20cm distance between the device and human body.
Function | Bands | Operation Frequency | Maximum Power |
---|---|---|---|
Wi-Fi | 2.4GHz | 2412-2472MHz | EIRP 19.10 dBm |
Bluetooth | 2.4GHz | 2402-2480 MHz | EIRP 8.0 dBm |
Importer Information (EU)
Anker Innovations Deutschland GmbH
Georg-Muche-Strasse 3, 80807 Munich, Germany
Customer Service
- 18-month limited warranty
- (US/Canada) +1 (800) 988 7973
- (AU) +61 3 8331 4800
- support@eufy.com
- service@myeufy.com.au (AU)
Anker Innovations Limited Unit 56, 8th Floor, Tower 2, Admiralty Centre, 18 Harcourt Road, Hong Kong
Follow us on social media: @EufyOfficial