ORSALA LED Work Lamp
Important Safety Instructions
These instructions are provided in multiple languages for your safety and proper use of the ORSALA LED work lamp.
General Safety:
- For indoor use only.
- Regularly check the cord, the transformer, and all other parts for damage. Do not use the product if any part is damaged.
- Keep these instructions for future reference.
Light Source:
- The light source in this luminaire shall only be replaced by the manufacturer, their service agent, or a similarly qualified person.
Cable/Cord:
- The external flexible cable or cord of this luminaire cannot be replaced. If the cord is damaged, the luminaire shall be destroyed.
(Note: Safety instructions are also provided in Deutsch, Français, Nederlands, Dansk, Íslenska, Norsk, Suomi, Svenska, Česky, Español, Italiano, Magyar, Polski, Eesti, Latviešu, Lietuvių, Portugues, Româna, Slovensky, Hrvatski, Ελληνικά, Русский, Български, Türkçe, Bahasa Indonesia, Bahasa Malaysia, ไทย, Tiếng Việt, 中文, 繁體中文, 한국어, 日本語, العربية.)
Assembly Instructions
Follow these steps to assemble your ORSALA LED work lamp.
Step 1: Connect Power Cord
Insert the power cord connector into the designated port on the lamp base. [Arrow pointing up into a socket on the base]
Step 2: Attach Lamp Arm
Position the lamp arm onto the base. Insert the provided screw into the connection point. [Magnified view shows screw insertion]
Step 3: Secure Lamp Arm
Use the provided Allen key (1x) to tighten the screw, securing the lamp arm to the base. [Allen key turning a screw]
Step 4: Connect Arm Segments
Connect the upper section of the lamp arm to the lower section. [Diagram shows two segments being joined]
Step 5: Secure Arm Connection
Use the provided screw and Allen key to secure the connection between the arm segments. [Magnified view shows screw insertion and tightening]
Step 6: Connect Power Adapter
Connect the power adapter's cable to the power cord of the lamp. [Arrow pointing down to connect a plug to a socket on the adapter]
Operation and Adjustments
The ORSALA LED work lamp offers adjustable lighting and brightness.
Adjusting the Lamp: The lamp arm and head can be adjusted to direct light as needed. [Diagrams show flexible arm and head movement with curved arrows indicating adjustment]
Turning On/Off: Briefly touch the base for approximately 0.5 seconds to turn the lamp on or off. [Finger touching the base, with light bulb icon changing state]
Adjusting Brightness/Color Temperature: Rotate the control on the base to adjust the brightness and color temperature (from 2700K warm white to 5000K cool white). [Diagram shows rotation control with temperature scale]
Turning Off (Long Press): Press and hold the control on the base for approximately 1.5 seconds to turn the lamp off. [Finger pressing the base, with light bulb icon]
Reach: The lamp has a maximum reach of approximately 3 meters (10 feet). [Illustration of a smartphone showing the lamp's reach]
