ECOVACS DEEBOT 605 User Manual
Congratulations on your purchase of an ECOVACS ROBOTICS DEEBOT! We hope it will bring you satisfaction for many years. We are confident that the purchase of your new robot will help you keep your home clean and give you more time for other things. Live smart. Enjoy life.
If you encounter situations not covered in this manual: Contact customer service, and one of our technicians can resolve your specific problem or answer your question.
For more information, visit the official ECOVACS ROBOTICS website: www.ecovacs.com
Due to continuous improvements, the company reserves the right to make technical and/or design changes to this product. Thank you for choosing DEEBOT!
1. Important Safety Instructions
When using an electrical appliance, basic precautions should always be followed, including the following:
READ ALL INSTRUCTIONS BEFORE USING THIS APPLIANCE
SAVE THESE INSTRUCTIONS
- The appliance can be used by children aged 8 and above and persons with reduced physical, sensory, or mental capabilities or lack of experience and knowledge if they are supervised or instructed regarding the use of the appliance in a safe manner and understand the risks. Children shall not play with the appliance. Cleaning and user maintenance shall not be performed by children without supervision.
- Clear the area to be cleaned. Remove power cords and small objects from the floor that can get caught in the appliance. Tuck in carpet edges under the carpet and lift items such as curtains and drapes from the floor.
- If there is a risk of falling in the cleaning area due to a step or stairs, the appliance should be used to ensure it can detect steps without falling over the edge. It may be necessary to place a physical barrier at the edge to prevent the appliance from falling. Ensure the physical barrier is not a tripping hazard.
- Use only as described in this manual. Use only recommended accessories or those sold by the manufacturer.
- Ensure your mains voltage matches the voltage marked on the charging unit.
- FOR HOUSEHOLD USE INDOORS ONLY. Do not use the appliance outdoors, or in commercial or industrial environments.
- Non-rechargeable batteries are prohibited. For battery information, see the Specifications section.
- Do not use without the dustbin and/or filters in place.
- Do not use the appliance in an area with lit candles or fragile items.
- Do not use in extremely hot or cold environments (below -5°C/23°F or above 40°C/104°F).
- Keep hair, loose clothing, fingers, and all parts of the body away from all openings and moving parts.
- Do not use the appliance in a room where an infant or a child is sleeping.
- Do not use the appliance on wet surfaces or surfaces with standing water.
- Do not let the appliance pick up large objects such as stones, large pieces of paper, or objects that can clog the appliance.
- Do not use to pick up flammable or combustible materials such as gasoline, printer or copier toner, or for use in areas where they may be present.
- Do not use the appliance to pick up anything that is burning or smoking, such as cigarettes, matches, hot ashes, or anything that may cause a fire.
- Do not place objects in the intake. Do not use if the intake is blocked. Keep the intake clear of dust, lint, hair, or anything that may reduce airflow.
- Be careful not to damage the cord. Do not pull or carry the appliance or charging unit by the power cord, do not use the power cord as a handle, do not close a door on the power cord, or do not pull the power cord around sharp edges or corners. Do not run the appliance over the power cord. Keep the power cord away from hot surfaces.
- If the power cord is damaged, it must be replaced by the manufacturer or its service workshop to avoid danger.
- Never use the charging unit if it is damaged.
- Do not use with a damaged power cord or container. Do not use the appliance or charging unit if it is not functioning properly, has been dropped, damaged, left outdoors, or come into contact with water. It must be repaired by the manufacturer or its service workshop to avoid danger.
- Turn OFF the power switch before cleaning or maintenance of the appliance.
- The plug must be removed from the container before cleaning or maintenance of the charging unit.
- Remove the appliance from the charging unit, and turn OFF the appliance's power switch before removing the battery for disposal of the appliance.
- The battery must be removed and disposed of in accordance with local laws and regulations before disposing of the appliance.
- Dispose of used batteries in accordance with local laws and regulations.
- Do not incinerate the appliance even if it is severely damaged. The batteries may explode in case of fire.
- When not using the charging unit for an extended period, please unplug it.
- The appliance must be used in accordance with the instructions in this user manual. ECOVACS ROBOTICS cannot be held responsible for any damage caused by improper use.
- The robot contains batteries that can only be replaced by competent persons. To replace or remove the battery, contact customer service.
- If the robot is not to be used for a long period, fully charge the robot and turn it OFF for storage, and unplug the charging unit.
- WARNING: For charging the battery, only the detachable unit YJS015F-1900600G supplied with the product should be used.
- The remote control is pre-installed with two non-rechargeable AAA batteries. To replace the battery in the remote control, turn the remote control over, press and remove its battery cover. Remove the batteries and insert the new batteries with the correct polarity. Reattach the battery cover.
- Non-rechargeable batteries must not be recharged.
- Different types of batteries or new and used batteries must not be mixed.
- The batteries in the remote control must be inserted with the correct polarity.
- Used batteries shall be removed from the appliance and disposed of safely.
- If the appliance is to be stored unused for a long period, the batteries should be removed.
- The connection terminals must not be short-circuited.
- To deactivate the Wi-Fi module on the DEEBOT, turn the robot ON. Place the robot on the charging dock and ensure the charging contacts on the DEEBOT and the charging dock pins are in contact with each other. Press and hold the AUTO mode button on the robot for 10 seconds until the DEEBOT emits 3 beeps. To activate the Wi-Fi module on the DEEBOT, turn OFF the robot and then turn it ON. The Wi-Fi module is enabled when the DEEBOT restarts.
For EU countries
Proper disposal of this product
This marking indicates that the product should not be disposed of with other household waste throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, use return and collection systems or contact the retailer where the product was purchased. They can recycle this product safely.
2. Package Contents
2.1 Package Contents
- Robot: A circular robotic vacuum cleaner with a blue accent light.
- Charging Dock + Power Adapter: A charging station with a power adapter and cable.
- (4) Side Brushes: Two pairs of side brushes.
- Foam Filter and High-Efficiency Filter: A set of filters.
- Remote Control with Batteries: A remote control unit.
- Dustbin: A removable dust collection container.
- Washable/Reusable Microfiber Cleaning Cloth: A cloth for mopping.
- Multi-functional Cleaning Tool: A tool with a brush and blade for maintenance.
- User Manual: This document.
- Quick Start Guide: A brief guide for initial setup.
Note: Information and illustrations are for reference only and may differ from the actual product. Product design and specifications are subject to change without prior notice.
2.3 Product Parts
Robot
- AUTO Mode Button: The main button for starting/pausing cleaning.
- Wi-Fi Indicator: Shows Wi-Fi connection status.
- Cleaning Mode Indicator: Indicates the current cleaning mode.
- Anti-collision Sensors and Shock Absorbers: Located on the front bumper to detect obstacles.
- Dustbin/Release Button: For removing the dustbin.
- Power Switch: Located on the side of the robot.
- Reset Button: Used for network configuration.
Underside
- Main Brush Assembly: The primary brush for sweeping debris.
- Charging Contacts: Metal contacts that connect to the charging dock.
- Fall Sensors: Detect edges to prevent falls.
- Dustbin: The compartment for collected dust.
- Side Brushes: Small brushes that sweep debris towards the main brush.
- Universal Wheel: A swivel wheel for maneuverability.
3. Usage and Programming
3.1 Before Cleaning
WARNING: Do not use DEEBOT on wet surfaces or surfaces with standing water.
- Carpet Edges: Tuck in carpet edges underneath before using the product on carpets with fringes. [Visual: Robot near a carpet with fringes, showing edges being tucked in ✔️]
- Clear Floor Space: Tidy up the area to be cleaned by properly arranging chairs and other furniture. [Visual: A clean room with furniture arranged neatly ✔️, contrasted with a cluttered room ❌]
- Prevent Falls: To prevent the appliance from falling down edges, it may be necessary to place physical barriers. [Visual: Robot near a drop-off with a barrier placed ✔️]
- Remove Obstacles: Remove power cords and small objects that may obstruct the robot from the floor. [Visual: A clean floor with no obstructions ✔️, contrasted with a floor with cords and small objects ❌]
3.2 Setup
- Connect the Adapter: Plug the power adapter into the charging dock and then into a wall outlet.
- Place the Charging Dock: Position the charging dock against a wall on a level surface. Ensure there is adequate clearance: 0.5m (1.6 ft) on both sides and 1.5m (5 ft) in front. [Visual: Diagram showing the charging dock placement with clearance dimensions.]
- Attach Side Brushes: Align the side brushes with the corresponding posts on the underside of the robot and press down until they click into place. [Visual: Diagrams showing side brushes being attached.]
- Turn ON: Flip the power switch on the robot to the ON position. [Visual: Image of the robot's side switch showing ON and OFF positions.]
- Charge DEEBOT: Place the DEEBOT onto the charging dock. The robot will automatically return to the charging dock when the cleaning cycle is finished or when the battery level is low. [Visual: Robot on charging dock, with a 4-hour charging indicator.]
3.3 Cleaning Mode Selection
1 AUTO Cleaning Mode
A random cleaning pattern (optimized for carpets) is selected by default.
To switch to a programmed cleaning pattern (optimized for hard floors) or to switch between these two patterns, do the following:
- Press the AUTO button for random cleaning. [Visual: Finger pressing the AUTO button.]
- Press the AUTO button twice (x2) for programmed cleaning. [Visual: Finger pressing the AUTO button twice.]
Note: The cleaning pattern cannot be changed until the DEEBOT is in pause mode or charging. DEEBOT will start a new cleaning cycle as soon as the cleaning pattern is changed. The programmed cleaning mode indicator lights up as soon as it is activated.
3.4 Spot Cleaning Mode (less than 3 minutes)
This mode is for cleaning a concentrated area. The robot will clean in a spiral pattern.
[Visual: Robot cleaning in a tight spiral pattern.]
3.5 Return to Charging Dock
The robot can be instructed to return to its charging dock at any time.
- Press and hold the AUTO button for 3 seconds until the DEEBOT emits a beep. [Visual: Finger pressing and holding the AUTO button.]
- Alternatively, press the "Return to Charger" button on the remote control. [Visual: Finger pressing the return-to-charger button on the remote.]
All the above functions can also be activated via the app. Download the ECOVACS app for access to more features such as edge cleaning, scheduled cleaning, etc.
[Visual: App Store and Google Play icons. A smartphone screen showing the ECOVACS HOME app interface.]
Compatibility: iOS 9.0 or later, Android 4.0 or later.
3.6 Pause, Wake, Power Off
1 Pause
Press the AUTO button to pause the robot.
[Visual: Finger pressing the AUTO button.]
Note: The robot's control panel will dim when the robot has been in pause mode for a few minutes. Press the AUTO mode button on the DEEBOT to wake the robot.
2 Wake
Press the AUTO button on the DEEBOT to wake it.
[Visual: Finger pressing the AUTO button.]
3 Power Off
Flip the power switch on the robot to the OFF position.
[Visual: Image of the robot's side switch showing OFF position.]
Note: When DEEBOT is not in use, it is recommended to leave it powered on for charging.
3.7 Optional Mopping System
Note: Empty the dustbin and remove the cleaning cloth plate before cleaning on carpets. When using the mopping system, tuck in carpet edges underneath so that the DEEBOT avoids the carpet. Use only water, and do not add detergent or other cleaning agents to the dustbin.
[Visual: Diagrams showing the attachment of the mopping module, filling the water tank, and the robot cleaning with the mopping pad.]
Note: Empty any remaining water from the dustbin after the DEEBOT has finished mopping.
4. Maintenance
Before cleaning or performing maintenance on the DEEBOT: Turn OFF the robot and unplug the charging unit.
4.1 Optional Mopping System Maintenance
[Visual: Diagrams showing the cleaning of the mopping module components: removing the cloth, cleaning the pad, and cleaning the water tank.]
4.2 Dustbin and Filters
Dustbin:
- Remove the dustbin from the robot. [Visual: Diagram showing dustbin removal.]
- Open the dustbin lid. [Visual: Diagram showing the dustbin lid being opened.]
- Empty the dust and debris into a trash receptacle. [Visual: Diagram showing dust being emptied from the dustbin.]
- Clean the filter net, foam filter, and high-efficiency filter. Ensure they are completely dry before reinserting. [Visual: Diagrams showing the filters being removed and cleaned.]
- Reassemble the dustbin. [Visual: Diagram showing the dustbin being reassembled.]
4.3 Main Brush and Side Brushes
Note: A multi-functional cleaning tool is included to simplify maintenance. The cleaning tool has sharp edges and must be handled with care.
Main Brush
- Use the multi-functional cleaning tool to cut and remove hair and debris from the main brush. [Visual: Diagram showing the cleaning tool being used on the main brush.]
- Lift the main brush assembly out of the robot. [Visual: Diagram showing the main brush being removed.]
- Clean the main brush assembly. [Visual: Diagram showing the main brush being cleaned.]
- Reinstall the main brush assembly. [Visual: Diagram showing the main brush being reinstalled.]
Side Brushes
- Remove the side brushes by pulling them upwards. [Visual: Diagram showing side brushes being removed.]
- Clean the side brushes. [Visual: Diagram showing side brushes being cleaned.]
- Attach the side brushes by aligning them with the posts and pressing down until they click. [Visual: Diagram showing side brushes being attached.]
4.4 Other Parts
- Universal Wheel: Remove the universal wheel assembly, clean it, and reattach it. [Visual: Diagrams showing the removal, cleaning, and reattachment of the universal wheel.]
- Charging Contacts: Clean the charging contacts on the robot and the charging dock with a dry cloth. [Visual: Diagrams showing cleaning of charging contacts.]
4.5 Regular Maintenance
For optimal DEEBOT performance, maintenance and part replacement should be performed as follows:
| Part on Robot | Maintenance Interval | Replacement Interval |
|---|---|---|
| Side Brush | Every two weeks | Every 3-6 months |
| Main Brush | Once a week | Every 6-12 months |
| Foam Filter/High-Efficiency Filter | Once a week | Every 3-6 months |
| Universal Wheel, Fall Sensors, Shock Absorbers | Once a week | / |
| Charging Contacts, Charging Dock Pins | As needed | / |
Note: A multi-functional cleaning tool is included to simplify maintenance. The cleaning tool has sharp edges and must be handled with care. ECOVACS manufactures various types of replacement parts and accessories. Contact customer service for more information on replacement parts.
5. Indicator Lamp and Sound Signals
The DEEBOT indicates errors via an indicator lamp and sound signals. More detailed support is available via the ECOVACS app and online on the website.
Indicator Lamp
| Scenario | Indicator Lamp |
|---|---|
| Robot is cleaning | AUTO mode button lights up continuously WHITE |
| Robot is charging | AUTO mode button blinks WHITE |
| Robot has low battery | AUTO mode button lights up continuously RED |
| Robot has a problem | AUTO mode button blinks RED |
| Programmed cleaning pattern is activated | Cleaning Mode Indicator lights up |
Sound Signals
| Sound Signal | Problem | Action |
|---|---|---|
| 1 beep | Main brush or side brush is stuck. | Clean the main brush or side brush as described in Section 4 Maintenance. |
| 2 beeps | Fall sensor error. | Wipe the fall sensor with a cleaning cloth. |
| 3 beeps | Dustbin is not properly attached. | Check that the dustbin is attached; if it is, remove it and reattach it properly. |
| Continuous beeps | Robot is suspended in the air or drive wheels are stuck. | Place the robot back on the floor or gently tap the bumper and clean the drive wheel as described in Section 4 Maintenance. |
6. Troubleshooting
| No. | Problem | Possible Causes | Actions |
|---|---|---|---|
| 1 | DEEBOT does not charge. | DEEBOT is not ON. | Turn ON DEEBOT. |
| DEEBOT is not connected to the charging dock. | Ensure the robot's charging contacts are properly connected to the charging dock pins. | ||
| Battery is completely discharged. | Reactivate the battery. Turn ON DEEBOT. Place DEEBOT on the charging dock manually, remove it after 3 minutes of charging, repeat this 3 times, and then charge normally. | ||
| 2 | DEEBOT cannot return to the charging dock. | Charging dock is not placed correctly. | Refer to Section 3.2 for correct charging dock placement. |
| 3 | DEEBOT gets stuck during cleaning and stops. | DEEBOT gets stuck on objects on the floor (power cords, curtains, carpet fringes, etc.). | DEEBOT will try to free itself in various ways. If it cannot, remove the obstacles manually and restart. |
| 4 | DEEBOT returns to the charging dock before finishing cleaning. | When the battery level becomes low, DEEBOT automatically switches to return-to-charger mode and returns to the charging dock to recharge. | This is normal. No action is required. |
| Working time varies depending on floor area, room complexity, and selected cleaning mode. | This is normal. No action is required. | ||
| 5 | DEEBOT does not clean automatically at the scheduled time. | Scheduling function is disabled. | Program DEEBOT for cleaning at specific times using the ECOVACS app. |
| DEEBOT is OFF. | Turn ON DEEBOT. | ||
| Robot's battery level is low. | Ensure DEEBOT is ON and connected to the charging dock so it always has a fully charged battery. | ||
| Robot's intake is blocked and/or debris is stuck in its parts. | Turn OFF DEEBOT, clean the dustbin, and turn the robot upside down. Clean the robot's intake, side brushes, and main brush as described in Section 4. | ||
| 6 | DEEBOT does not clean the entire surface. | The cleaning surface is not properly cleared. | Remove small objects from the floor and clear the cleaning surface before DEEBOT starts cleaning. |
| 7 | Water does not come out of the dustbin when DEEBOT is mopping. | Dustbin is out of water. | Refill the dustbin with water. |
| Water outlets on the bottom of DEEBOT are clogged. | Check the water outlets on the bottom and clean them. | ||
| 8 | DEEBOT cannot connect to the home WiFi network. | Incorrect username or password entered for the home WiFi network. | Enter the correct username and password for the home WiFi network. |
| DEEBOT is out of range of the home WiFi signal. | Ensure DEEBOT is within range of the WiFi signal in the home. | ||
| Network configuration started before DEEBOT was ready. | Turn ON the power switch. Press the RESET button for 3 seconds. DEEBOT is ready for network configuration when it plays a melody and its Wi-Fi indicator light blinks slowly. | ||
| Your smartphone's operating system needs to be updated. | Update your smartphone's operating system. The ECOVACS app works with iOS 9.0 and higher, Android 4.0 and higher. | ||
| 9 | Remote control is not working (remote control's effective range is 5 m (16')). | Remote control battery needs to be replaced. | Replace the battery with a new one and ensure it is inserted correctly. |
| DEEBOT is OFF or DEEBOT's battery level is low. | Ensure DEEBOT is ON and fully charged. | ||
| Error in IR signal transmission due to dirty IR transmitter on the remote control or IR receiver on the DEEBOT. | Wipe the IR transmitter on the remote control and the IR receiver on the DEEBOT with a clean, dry cloth. | ||
| There is other equipment interfering with the IR signal to the DEEBOT. | Avoid using the remote control near other equipment that uses IR signals. |
7. Technical Specifications
| Model | DO3G.02 | ||
|---|---|---|---|
| Operating Voltage | 14.4 V DC | Rated Power | 25 W |
| Charging Unit | |||
| Power Adapter | YJS015F-1900600G/DK18-190060H-V | ||
| Rated Input Voltage | 100-240 V AC | Rated Input Current | 0.5 A |
| Rated Input Voltage | 19 V DC | Rated Output Current | 0.6 A |
| Rated Output Voltage | 19 V DC | Rated Output Current | 0.6 A |
| Remote Control | |||
| Model | RC1633A | Input Voltage | 3 V DC |
| Standby Power Consumption | Less than 0.50 W | ||
| Network Standby Power Consumption | Less than 2.00 W | ||
| Frequency Band and Power | Operating Frequency: 2412 MHz - 2472 MHz Maximum Transmit Power: 19 dBm. | ||
Note: Due to continuous improvements, technical and design specifications may change. The equipment should be used with a minimum distance of 20 cm between the radiator and your body.
EU Declaration of Conformity
Document number: 0015
Manufacturer: Ecovacs Robotics Co., Ltd.
Address: No.108 Shihu Road(West) Wuzhong Zone Suzhou 215168 P.R. China.
We hereby declare that the following products listed below are in accordance with the provisions in the latest version of EC in this document.
- Product designation: Automatic battery-operated cleaner
- Brand: ECOVACS ROBOTICS
- Model: DO3G, DO3G.11, DO3G.XX (X=0-9, presents different color /accessories)
- Specification: Electrical appliances for household and similar purposes
EC Regulations or Directives:
- RED: Directive 2014/53/EU
- RoHS: Directive 2011/65/EU
- WEE: Directive 2002/96/EC
- REACH: Directive 1907/2006/EC
- Eco-design: Directive 2009/125/EC
Standards the product is in conformity with:
- EN 60335-2-2:2010 + A11:2012 + A1:2013
- EN 60335-1:2012+A11:2014+AC:2014
- EN 60335-2-29:2004 + A2:2010
- EN 62233:2008
- EN 55014-1:2006+A1:2009+A2:2011
- EN 55014-2:2015
- EN 61000-3-2:2014
- EN 61000-3-3:2013
- EN 300 328 V2.1.1
- EN301 489-1 V2.2.0(2017-03)
- EN301 489-17 V3.2.0(2017-03)
- EN 62311:2008
- IEC62321:2008
- EN 50564: 2011
- EN50581:2012
Signature: Amie Zhuang
General Manager: Zhuang Jianhua
Date: 2018-04-16
