Franke Specialist Series Stainless Steel Undermount Sinks
Franke is Swiss
Specialist Series Stainless Steel undermount sinks 2009
Good things come from innovative thinking.
Here at Franke, we believe in making good things even better. And we try to think of everyone: kitchen designers, fitters and end users.
- 1. Integrated Designer Waste: Improves hygiene and filters waste to the drain.
- 2. Space saving Plumbing Kit: Creates more space under the sink.
- 3. Food preparation centres: Combining Accessories which function with the sink design.
- 4. Tap Support Arm: Stabilises and supports extra heavy taps on the sink.
- 5. Wastes to rear of bowls: Combined with the Franke Plumbing Kit maximises space under the sink.
- 6. Laser edge profile: Slimline profile for inset sinks at benchtop for easy cleaning.
- 7. Remote Designer Waste: Releases the plug without putting your hands in the water.
- 8. Integrated sealing strip: Laser edge profile sinks are water sealed with a factory applied inert polyurethane sealent on the underside of the rim edge.
- 9. Flexible fixing clips: Rail system on the underside of the sink to slide clips where you want them.
- 10. Cleaning and care: Franke Inox Cream to clean and protect your stainless steel sinks and accessories.
Features and benefits
- 25 year warranty
- Stainless steel
- Fragranite finish
- Elevated tap bank
- Deep bowl
- Super deep bowl
- Franke bowl insulation
- Sound deadening pads
- Food preparation centre
- Laser edge profile
- Waste to rear main bowl
- Flexible fixing system
- Designer waste
- Remote twist designer waste
- Remote lift designer waste
- Integrated sealing strip
Franke is Swiss - specialists in kitchen solutions.
Founded in Switzerland in 1911, Franke has grown to become the world's largest manufacturer of kitchen sinks, leading the industry in design, quality and innovation.
Switzerland is a highly innovative country. And not by chance, or momentarily, but by tradition. Compared to other European countries Swiss companies invest a high percentage of revenue in research and work in close consultation with universities. It is of little surprise therefore, that Switzerland leads the world in its number of patent applications.
Franke Aarburg cherishes the same innovative spirit. And does so by tradition, like Switzerland itself. Time and time again the company has come up with groundbreaking inventions since its foundation by Hermann Franke in 1911. Franke is now recognized as a global leader and operates offices in over 50 countries and manufacturing plants in over 20.
Franke's Kitchen Systems Division, incorporates all that is used in the domestic kitchen from Sinks, Cooking Appliances, Taps, Waste Management Systems and Accessories that form the total food preparation centre.
Franke. For kitchens without compromise.
Specialist Series- Single Bowl Undermounts
| Model | Code | Page |
|---|---|---|
| Ariane | ARX | 16 |
| Eisinger | UCX | 18 |
| Galassia | GAX | 18 |
| Kubus | KBX | 10 |
| Oceania | OXX | 15 |
| Peak | PPX | 8 |
| Planar | PPX | 12 |
Specialist Series- Multiple Bowl Undermounts
| Model | Code | Page |
|---|---|---|
| Ariane | ARX | 24 |
| Aurora | PFX | 25 |
| Kubus | KBX | 22 |
| Planar | PPX | 23 |
| Regatta | RGX | 26 |
| Steel Queen | SQX | 27 |
Accessories -
- Soap Dispensers
- Kitchen Scales
- Cleaning Products
Franke Undermounts Single Bowl
The Santis (2502 metres) is the highest mountain in eastern Switzerland. The weather station installed on the peak in 1882 was a pioneering Swiss achievement.
Sleek, ultra modern
Undermount sinks truly fit the bill for the ultra modern look, they are stunning when combined with granite, wood, marble and other solid surface work tops.
Now featuring the new Franke PEAK Series offering a technologically advanced 5mm corner radius and unique drain cover.
Franke Undermounts are available in single bowl, multi and double bowl configurations giving you the flexibility to custom design your kitchen.
Peak PKX 110-18
Description: Dimensions 210 x 450mm
Bowl: 180 x 420 x 180mm/12L
Cut-out Template: PKX 110-18
Accessories available: 1, 2, 3, 4, 5, 6
Peak PKX 110-34
Description: Dimensions 370 x 450mm
Bowl: 340 x 420 x 180mm /22L
Cut-out Template: PKX 110-34
Included: 1
Accessories available: 1, 2, 3, 4, 5, 6
Peak PKX 104-45 Drainer
Description: Dimensions 480 x 450mm
Drainer: 450 x 420 x 25mm
Cut-out Template: PKX 104-45 Drainer
Accessories available: 1, 2, 3, 4, 5, 6
Peak PKX 110-45
Description: Dimensions 480 x 450mm
Bowl: 450 x 420 x 180mm/29L
Cut-out Template: PKX 110-45
Included: 1
Accessories available: 1, 2, 3, 4, 5, 6
Peak PKX 110-50
Description: Dimensions 530 x 450mm
Bowl: 500 x 420 x 180mm/32L
Cut-out Template: PKX 110-50
Included: 1
Accessories available: 1, 2, 3, 4, 5, 6
Peak PKX 110-70
Description: Dimensions 730 x 450mm
Bowl: 700 x 420 x 180mm/44L
Cut-out Template: PKX 110-70
Included: 1
Accessories available: 1, 2, 3, 4, 5, 6
Franke Kubus
Kubus KBX 110-20
Description: Dimensions 240 x 440mm
Bowl: 200 x 400 x 150mm/8L
Cut-out Template: KBX 110-20
Accessories available: 1, 2, 3, 4, 5, 6, 7
Kubus KBX 110-34
Description: Dimensions 380 x 440mm
Bowl: 340 x 400 x 175mm/17L
Cut-out Template: KBX 110-34
Included: 7
Accessories available: 1, 2, 3, 4, 5, 6, 7
Kubus KBX 104-45 Drainer
Description: Dimensions 490 x 440mm
Drainer: 450 x 400 x 25mm
Cut-out Template: KBX 104-45 Drainer
Accessories available: 1, 2, 3, 4, 5, 6, 7
Kubus KBX 110-45
Description: Dimensions 490 x 440mm
Bowl: 450 x 400 x 180mm/23L
Cut-out Template: KBX 110-45
Included: 7
Accessories available: 1, 2, 3, 4, 5, 6, 7
Kubus KBX 110-50
Description: Dimensions 540 x 440mm
Bowl: 500 x 400 x 190mm/27L
Cut-out Template: KBX 110-50
Included: 7
Accessories available: 1, 2, 3, 4, 5, 6, 7
Kubus KBX 110-55
Description: Dimensions 590 x 440mm
Bowl: 550 x 400 x 190mm/30L
Cut-out Template: KBX 110-55
Included: 7
Accessories available: 1, 2, 3, 4, 5, 6, 7
Kubus KBX 110-70
Description: Dimensions 740 x 440mm
Bowl: 700 x 400 x 190mm/40L
Cut-out Template: KBX 110-70
Included: 7
Accessories available: 1, 2, 3, 4, 5, 6, 7
Franke Planar
Planar PPX 110-16
Description: Dimensions 200 x 450mm
Bowl: 160 x 410 x 155mm
Cut-out Template: PPX 110-16
Accessories available: 1, 2, 3, 4, 5, 6, 7
Planar PPX 110-38
Description: Dimensions 420 x 450mm
Bowl: 380 x 410 x 200mm
Cut-out Template: PPX 110-38
Included: 1
Accessories available: 1, 2, 3, 4, 5, 6, 7
Planar PPX 110-52
Description: Dimensions 560 x 450mm
Bowl: 520 x 410 x 200mm
Cut-out Template: PPX 110-52
Included: 1
Accessories available: 1, 2, 3, 4, 5, 6, 7
Planar PPX 110-72
Description: Dimensions 760 x 450mm
Bowl: 720 x 410 x 200mm
Cut-out Template: PPX 110-72
Included: 1
Accessories available: 1, 2, 3, 4, 5, 6, 7
Planar PPX 111
Description: Dimensions 980 x 450mm
Bowls: 470 x 410 x 200mm, 160 x 410 x 155mm
Cut-out Template: PPX 111 REV
Included: 1
Accessories available: 1, 2, 3, 4, 5, 6, 7
Franke Oceania
Oceania OXX 110
Description: Dimensions 760 x 480mm
Bowl: 710 x 430 x 225mm/60L
Cut-out Template: OXX 610
Accessories available: 1, 2, 3, 4
Franke single bowl undermounts
Ariane ARX 110-17
Description: Dimensions 190 x 340mm
Bowl: 170 x 320 x 130mm/4L
Cut-out Template: ARX 110-17
Accessories available: 1, 2, 3, 4, 5, 6, 7, 8, 9, 10
Ariane ARX 110-17D
Description: Dimensions 190 x 456mm
Bowls: 170 x 435x 130mm
Cut-out Template: ARX 110-17D
Accessories available: 1, 2, 3, 4, 5, 6, 7, 8, 9, 10
Ariane ARX 110-33
Description: Dimensions 351 x 371mm
Bowl: 330 x 350 x 160mm/12L
Cut-out Template: ARX 110-33
Included: 5
Accessories available: 1, 2, 3, 4, 5, 6, 7, 8, 9, 10
Ariane ARX 110-35
Description: Dimensions 371 x 456mm
Bowl: 350 x 435 x 180mm/18L
Cut-out Template: ARX 110-35
Included: 4
Accessories available: 1, 2, 3, 4, 5, 6, 7, 8, 9, 10
Franke Eisinger/Galassia
Eisinger UCX 110-38
Description: Dimensions Ø 425mm
Bowl: Ø 385 x 180mm
Cut-out Template: UCX 110-38
Accessories available: 1
Galassia GAX 110-30
Description: Dimensions 332 x 372mm
Bowl: 300 x 340 x 170mm
Cut-out Template: GAX110-30
Accessories available: 1, 2, 3
Galassia GAX 110-45
Description: Dimensions 482 x 432mm
Bowl: 450 x 400 x 190mm
Cut-out Template: GAX 110-45
Accessories available: 1, 2, 3
Undermount installation guide
General Information
A template and fixing instructions are provided in the box. Some circumstances may allow for fitting a bowl directly to the worktop. Alternatively a plywood template can be made to the size of the sink, which will effectively 'sandwich' the sink flange, when addressed to the underside of the material. (Refer to diagrams below).
We would recommend the use of a sealant between the flange of the sink and the worktop to avoid any water ingress. In all cases you are advised to consult your supplier.
Templates provided
Alternative fixing systems
Stainless Steel undermount profiles
- Reveal
- Flush-mounted
- Overhung
Franke Undermounts Multiple Bowl
The Morteratsch Glacier covers approximately 16 square kilometres, making it the largest ice tongue in the Bernina Group of the Grisons Alps. It is accessible to good skiers.
Innovative solutions
Franke Multi Bowl Undermounts are stunning, leading the way in cutting edge design creating a feature for the centre of your modern kitchen.
Franke Kubus
Kubus KBX 120-34
Description: Dimensions 770 x 445mm
Bowls: 340 x 400 x 175mm (x2)
Cut-out Template: KBX 120-34
Included: 7
Accessories available: 1, 2, 3, 4, 5, 6, 7
Franke Planar
Planar PPX 120
Description: Dimensions 840 x 450mm
Bowls: 380 x 410 x 200mm (x2)
Cut-out Template: PPX 120
Included: 1
Accessories available: 1, 2, 3, 4, 5, 6, 7
Planar PPX 151
Description: Dimensions 980 x 450mm
Bowls: 340 x 410 x 200mm, 160 x 410 x 155mm
Cut-out Template: PPX 151 REV
Accessories available: 1, 2, 3, 4, 5, 6, 7
Franke Ariane
Ariane ARX 160
Description: Dimensions 598 x 485mm
Bowls: 350 x 435 x 180mm, 170 x 320 x 130mm
Cut-out Template: ARX 160 SBL, ARX 160 SBR
Included: 3, 5
Accessories available: 1, 2, 3, 4, 5, 6, 7
Ariane ARX 160D
Description: Dimensions 598 x 485mm
Bowls: 350 x 435 x 180mm, 170 x 435 x 130mm
Cut-out Template: ARX 160D SBL, ARX 160D SBR
Included: 3, 5
Accessories available: 1, 2, 3, 4, 5, 6, 7
Ariane ARX 120D
Description: Dimensions 786 x 486mm
Bowls: 350 x 435 x 180mm (x2)
Cut-out Template: ARX 120D
Included: 3, 5
Accessories available: 1, 2, 3, 4, 5, 6, 7
Franke Aurora
Aurora PFX 620A
Description: Dimensions 860 x 500mm
Bowls: 380 x 420 x 180mm, 360 x 380 x 180mm
Cut-out Template: Aurora PFX 620A
Included: 1, 3, 4, 5
Accessories available: 1, 3, 4, 5, 6
Aurora PFX 620B
Description: Dimensions 860 x 500mm
Bowls: 380 x 420 x 180mm (x2)
Cut-out Template: Aurora PFX 620B
Included: 2, 3, 4, 5
Accessories available: 1, 2, 3, 4, 5, 6
Franke Regatta
Regatta RGX 160
Description: Dimensions 800 x 520mm
Bowls: 395 x 480 x 230mm/30L, 340 x 420 x 175mm/15L
Cut-out Template: RGX160
Included: 2, 3
Accessories available: 1, 2, 3
Regatta RGX 120D
Description: Dimensions 865 x 520mm
Bowls: 395 x 480 x 230mm (x2)
Cut-out Template: RGX 120D
Included: 2
Accessories available: 1, 2, 3
Franke Steel Queen
Steel Queen SQX 120D
Description: Dimensions 800 x 470 mm
Bowls: 360 x 410 x 200mm (x2)
Cut-out Template: SQX 120D
Includes: 1, 2, 3
Accessories available: 1, 2, 3, 4, 5
Steel Queen SQX 120C-L
Description: Dimensions 700 x 470mm
Bowls: 250 x 410 x 180mm, 360 x 410 x 200mm
Cut-out Template: SQX 120C-L
Includes: 1, 2, 3, 4
Accessories available: 1, 2, 3, 4, 5
Steel Queen SQX 120C-R
Description: Dimensions 700 x 470mm
Bowls: 360 x 410 x 200mm, 250 x 410 x 180mm
Cut-out Template: SQX 120C-R
Includes: 1, 2, 3, 4
Accessories available: 1, 2, 3, 4, 5
Franke Accessories
SD23 Liquid soap dispenser
Description: Dimensions 55 x 100mm
Description: Soap dispenser
Cut-out: Ø32mm
Model: SD23
Includes: Refill under sink container
Finish: Chrome
SD55 Liquid soap dispenser
Description: Dimensions 80 x 75mm
Description: Soap dispenser
Cut-out: Ø25mm
Model: SD55
Includes: Refill under sink container
Finish: Chrome
SD 319 Liquid soap dispenser
Description: Dimensions 45 x 100mm
Description: Soap dispenser
Cut-out: Ø25mm
Model: SD 319
Includes: Refill under sink container
Finish: Chrome
Kitchen scale IKS 2000
Description: Dimensions 212 x 212mm
Description: Fully electronic micro processor scale
Cut-out: 195 x 195mm, cr = 6
Model: IKS 2000
Finish: Satin
Inox Creme/Twister
Description: PVC 250g tube
Description: Highly effective stainless steel cleaner.
Model: Inox Creme
Includes: Box of 10 tubes
Description: 300g tub
Description: Inox Twister is a highly effective stainless steel cleaner in a ready to use applicator.
Model: Inox Twister
Includes: Box of 12
Spazio Plumbing Kit
Description: The solution to installing two and three bowl sinks into one flush fitted outlet.
Model: Spazio Plumbing Kit
Finish: Grey PVC
Franke is Swiss
There's a lot more to Franke – sinks, taps, appliances, waste management systems and accessories.
Available at leading electrical, plumbing and kitchen retailers.
Franke Australia Pty Ltd
ABN 13 084 966 496
1263 Ferntree Gully Road
Scoresby Vic 3179
Tollfree 1800 372 653
Fax 1300 372 653
www.franke.com.au
Related Documents
 |
Franke Plus: Sinks, Taps, and Kitchen Accessories - Product Catalog Explore the Franke Plus catalog featuring a wide range of stainless steel, granite, and ceramic sinks, taps, and kitchen accessories. Discover the All-In system for enhanced kitchen workflow and upgrade options for your ideal tap. |
 |
Franke Sinks Installation and User Manual Comprehensive installation and user guide for Franke sinks, covering various models and materials. Includes step-by-step instructions, safety precautions, and contact information. |
 |
Franke GD23-36S Grid Drainers Bottom Grids Specification Sheet This document provides detailed specifications for the Franke GD23-36S Grid Drainers Bottom Grids, an accessory for kitchen sinks, finished in stainless steel. |
 |
Franke Home Solutions Product Guide: Sinks and Mixers Explore the Franke Home Solutions Product Guide featuring a comprehensive range of high-quality Fragranite and Stainless Steel kitchen sinks, innovative sink mixers, and waste management solutions. Discover durable, stylish, and functional products designed to enhance any kitchen. |
 |
Franke ORK110 Orca Fireclay Sink Specification Sheet Detailed specifications for the Franke ORK110 Orca fireclay kitchen sink, including dimensions, material, and product information. |
 |
Franke CUX16021-W Culinary Center Sink - Technical Specifications Detailed technical specifications for the Franke CUX16021-W Culinary Center Sink, including dimensions, material, installation type, and features. This undermount sink is made of stainless steel with a silk finish and features a double bowl design. |
 |
Franke Sinks: Global Contacts and Installation Guide Find Franke kitchen sink contact information worldwide and access installation and maintenance guidance, including product details for the Franke Maris MRX 110-40. |
 |
Franke Price List - Effective April 2025 Comprehensive price list from Franke for their range of kitchen sinks, laundry tubs, taps, and accessories, effective April 2025. Includes model numbers, specifications, and pricing. |