EasySMX X05 Wireless Controller User Manual

Product Introduction

The EasySMX X05 Game Controller supports 2.4G Wireless, Bluetooth, and Switch connection modes. It is compatible with PC, Switch, and Android/iOS (MFI games above version 13.0).

Button Layout Description

The controller features standard gaming buttons including A, B, X, Y, LB, RB, LT, RT, Left Joystick (L3), Right Joystick (R3), D-pad, HOME button, BACK button, START button, M button, O button, Mode switch button, Type-C charging port, and a RESET hole.

Connection Operations

Receiver Connection

To connect via receiver: Plug the USB receiver into a USB port. Set the MODE SWITCH BUTTON to the receiver position. Press the HOME button to power on the controller. The LED indicator will become solid, and the controller will vibrate briefly, indicating a successful connection.

Note: If the controller fails to pair with the receiver, forced pairing is required.

Forced Pairing

1. Plug in the USB RECEIVER.
2. Click the button on the receiver briefly; the receiver LED indicator will flash rapidly.
3. With the controller powered off, press and hold the Home button for 5 seconds to turn on the controller. The controller indicator light will flash rapidly. When the indicator light becomes solid, the controller will vibrate briefly, indicating successful pairing.

Bluetooth Connection

First Connection: Set the MODE SWITCH BUTTON to the BT position. Press and hold the HOME BUTTON for 5 seconds to power on the controller; the controller LED indicator will flash rapidly. Open the device's Bluetooth settings and search for "Xbox Wireless Controller". Click to pair. When the indicator light becomes solid, the controller will vibrate briefly, indicating successful pairing.

Subsequent Connections: Set the MODE SWITCH BUTTON to the BT position. Press the HOME BUTTON briefly to reconnect automatically.

NS Switch Connection

First Connection: Set the MODE SWITCH BUTTON to the NS position. Press and hold the HOME button for 5 seconds to turn on the controller. The controller indicator light will flash rapidly. On the Switch, go to "Controllers" and "Change Grip/Order" to enter pairing mode. When the LED becomes solid, the controller will vibrate briefly, indicating successful pairing.

Subsequent Connections: Set the MODE SWITCH BUTTON to the NS position. Press the HOME BUTTON briefly to reconnect the Switch console.

Note: In Switch mode, click the O BUTTON to take a screenshot.

Mode Switching

Hold BACK + START for 3 seconds to switch between X-input (blue light) and D-input (yellow light) modes. A brief controller vibration indicates successful setting.

Turbo Setting

Manual Turbo: Press M & A. Cancel Turbo: Press M & A again. To set continuous trigger, press and hold the A button.

Buttons that can be set with turbo function are: A, B, X, Y, LB, RB, LT, RT.

Note: M + Left joystick left decreases turbo speed; M + Left joystick right increases turbo speed.

RGB Light Adjustment

Double-click the M button; the controller will vibrate briefly and enter the RGB adjustment mode.

1. Change Lighting mode: Use the left joystick UP and DOWN to switch between light modes (steady-on, breathing, dazzling, gradient, off).
2. Change the lighting color: Use the left joystick LEFT and RIGHT to switch between light colors (red, orange, yellow, green, cyan, blue, purple).
3. Adjust the brightness: Press M + L3.

After setting, press M briefly to exit the light adjustment mode.

Vibration Adjustment

M + Left joystick up enhances vibration; M + Left joystick down reduces vibration (0%, 25%, 50%, 75%, 100%).

Joystick and Trigger Calibration

With the controller power on, press and hold HOME + BACK + B for 3 seconds to enter calibration mode. Press each trigger twice, rotate each joystick twice, place the controller horizontally, and press B briefly to exit and complete the calibration.

Charging and Indicators

Controller Power off state: Slow flashing red light while charging, solid green light when fully charged.

Wired Connection: Maintains the current mode light.

Wireless Connection: The mode light flashes slowly while charging, and stays on when fully charged.

Low Battery Reminder

When the controller is connected, a slow flashing indicator light indicates low voltage. Please charge in time.

Shutdown

• Manual Power Off: Press and hold the HOME button for 5 seconds.
• Automatic Power Off: The controller turns off automatically after 5 minutes of inactivity.

Product Specifications

Package Contents

• Wireless Controller x1
• Wireless Receiver x1
• Type-C Data Cable x1
• Product Manual x1

FCC Caution

§ 15.19 Labelling requirements.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

§ 15.21 Changes or modification warning

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

§ 15.105 Information to the user.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

RF warning for Portable device:

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction. According to § 15.247(e)(i) and § 1.1307(b)(1), systems operating under the provisions of this section shall be operated in a manner that ensures that the public is not exposed to radio frequency energy level in excess of the Commission's guidelines. According to KDB 447498 (2)(a)(i)