Autex Acoustics 3D Tiles Manufacturer's Guarantee
Autex Acoustics 3D Tiles are manufactured by Autex Industries Ltd and Autex Australia Pty Ltd under ISO 9001 and ISO 14001 certified Quality Environmental Management Systems. The product is guaranteed to be free from manufacturing defects and carries a Manufacturer's Guarantee for a period of no less than ten years to meet all of the performance properties stated within this guarantee.
Specification
| Specification | Product name | Description | Metric |
|---|---|---|---|
| Tile dimensions | 3D Tiles | 100% polyester thermally moulded, needle punched tile | 575 mm x 575 mm |
| Tile tolerance | Classic | 498 mm x 575 mm | |
| S5.46 | 288 mm x 575 mm | ||
| S5-50 | |||
| Thickness | Tiles range from 25 mm to 140 mm. Refer to Data Sheet for specific thickness values. | ||
| Depth tolerance | (+/- 0.5 mm) | (+/- 0.5 mm) (+/- 0.5 mm) | |
| Weight | 1680 gsm |
Physical description/properties
| Boiling point: | N/A |
| Melting point: | 250°C |
| Vapour pressure: | N/A |
| Specific gravity: | Polyester 1.38 |
| Flash point: | N/A |
| Explosive limits: | N/A |
| Solubility in water: | Not soluble |
| Alkalinity: | pH 7.8 |
| Relative vapour density: | N/A |
Acoustic performance
3D Tiles are specifically designed to reduce and control reverberated noise and echo in building interiors.
Minimum Noise Reduction Coefficient (NRC): 0.75
| Frequency (Hz) | 125 | 250 | 500 | 1000 | 2000 | 4000 | NRC |
|---|---|---|---|---|---|---|---|
| 3D Tiles (without AAB 35-25) | 0.15 | 0.45 | 0.65 | 0.90 | 0.90 | 0.80 | 0.75 |
| 3D Tiles (with AAB 35-25) | 0.25 | 0.60 | 0.95 | 1.05 | 1.00 | 0.90 | 0.90 |
| 3D Tiles S-5.37, S-5.46 | 0.15 | 0.65 | 0.60 | 0.70 | 0.75 | 0.70 | 0.65 |
Service
For further information about 3D Tiles or any other Autex Acoustics product, please contact your account manager or visit our website.
Care and maintenance
Maintain in accordance with the Care and Maintenance Guide available for this product.
Product specifications
Composition
100% polyester fibre from polyethylene terephthalate (PET). 3D Tiles contains a minimum of 72% recycled polyester fibre.
Suitable applications
Decorative and functional acoustic tile for retail, education, hospitality and commercial interiors.
Fire ratings
3D Tiles have been evaluated using the following test methods:
- ISO 9705: 1993
Classification: Group 1-S
Smoke production rate: <5.0m²/s
As required by NZBC C/VM2 - AS ISO 9705 - 2003
Classification: Group 1 (SMOGRArc): <100m²/s²
Assessed using methodology AS ISO 9705 - 2003 in accordance with AS 5637.1:2015, as required by NCC Specification 7: Fire Hazard properties: S7C4 FI 4974 FAR 4055 - EN13501-1:2007+A1:2009 (6 mm 3D Tiles)
B - s1, d2
Report WF 336913 - ASTM E84-14 (12 mm 3D Tiles)
Class A, FS:0 - SD:10
Report RJ3297
VOC emissions
Autex Acoustics polyester has been tested for chemical emissions in accordance with ASTM D5116 and is considered a low VOC product. VOC concentration: 0.009 mg/m³ (7 days).
Water vapour sorption
ASTM C1104 / C1104M-13a
Test conditions: 49°C, 95%RH
Water vapour absorbed and adsorbed after 4 days: 0.4% by weight.
Microbial resistance
ASTM G21-15
Growth rating: 0 (No growth)
3D Tiles do not promote the growth of moulds and mildew.
Colour fastness to light
3D Tiles are suitable for indoor use only. Light fastness is dependent on use and exposure. 3D Tiles has been evaluated to the following standard:
ISO 105-B02:2014
Rating: 6 (Highest = 7)
Colour fastness to rubbing
ISO 105-X12:2016
Dry rating: 4-5 (Highest = 5)
Wet rating: 4-5 (Highest = 5)
Pattern repeat
Non-woven. No pattern repeat, but the product has a directional grain. Product may vary from samples and batch to batch due to fibre blending and lay-up, which is an inherent feature of this product.
Fabric care
Blot spills from fabric quickly. Wipe with a damp cloth. Avoid rubbing and using excessive amounts of water as this will affect the finish. Use carpet or upholstery shampoo as directed.
Blot with a clean, dry cloth after each application of the solution.
Custom printed 3D Tiles require the services of a specialist cleaning company. Refer to the 3D Tiles Care and Maintenance Guide for more information.
Contact Information
- New Zealand
702-718 Rosebank Road,
Private Bag 19988
Avondale 1746, Auckland
T 0800 428 839
T +64 9 828 9179
autexacoustics.co.nz - Australia
285 Swan Street,
Richmond, VIC 3121
T 1800 678 160
T +61 3 9450 6700
autexacoustics.com.au - United Kingdom
Unit J4, Lowfields Way,
Lowfields Business Park,
Elland, West Yorkshire
HX5 9DA
T +44 0 142 241 8899
autexacoustics.co.uk - United States
1630 Dan Kipper Drive,
Riverside, CA 92507
T +1 424 203 1813
autexacoustics.com
Autex is an ISO certified organisation encompassing Quality (ISO 9001), Environmental (ISO 14001), and Health and Safety (ISO 45001). Brand names and logos are registered or unregistered trademarks owned or used under license by Autex Industries Limited or other members of the Autex Group. © Copyright 2025 Autex Industries Ltd. All rights reserved. It is the user's responsibility to determine if the product and information presented in this document is suitable for the intended application by engaging a suitably qualified consultant. The information contained in this document is correct to the best of our knowledge at the date of its publication. To verify that this document is the most current publication please check our website or contact your Autex Acoustics account manager.
