Teaching Procedure for Wireless Neon Lights

Step 1: Install Discharge Needle

Diagram Description: An illustration shows a device with controls labeled "Power regulation", "Mode switching (Music/Long arc)", and "Frequency regulation". A discharge needle is depicted being screwed into a fixing hole on the top of the device.

Install the discharge needle and screw it on the fixing hole.

Step 2: Connect Power Plug

Diagram Description: An illustration shows the rear of the device with a "Power adapter jack". A power plug is being inserted into this jack.

Plug the power plug into the host.

Step 3: Power On and Run

Diagram Description: An illustration shows the device connected to a power adapter, which is plugged into a wall socket. A decorative, tree-like structure with glowing tips (little neon lights) is shown wirelessly connected to the device.

Plug in socket. Connect the power supply to the host. Then the power supply is switched on to run.

Step 4: Bluetooth Music Playback

Diagram Description: Similar to Step 3, showing the device, power connection, and wirelessly connected neon lights. A smartphone icon with a Bluetooth symbol is displayed, indicating the connection method.

Little neon lights on wirelessly. Use your mobile phone to search for Bluetooth and connect, then you can play music in music mode. When playing music, please turn the phone volume to the maximum and turn up the power knob. The ordinary music effect is not good; it is recommended to use square wave music. For square wave music, you can contact customer service to receive.

? Use your mobile phone to search for Bluetooth and connect.