Introduction
This document serves as a comprehensive Use & Care Manual for the Solar Light product. It provides essential instructions for safe assembly, proper installation, and optimal usage to ensure the best performance from your solar-powered lighting solution.
What's Included
- Solar Light Unit
- Double-Sided Tape (3M)
- Punch Template
- Installation Accessories (e.g., screws, anchors)
- User Manual
Solar Light Model Overview
The Solar Light features multiple color modes, allowing users to select their preferred lighting effect via a convenient switch. Available modes typically include:
- Warm Light
- Mixing (Warm + White)
- White Light
- OFF
Installation Methods
Two primary installation methods are detailed:
Method 1: Double-Sided Adhesive Fixation
- Ensure the mounting surface is clean.
- Securely affix the light using the provided double-sided adhesive tapes.
Method 2: Screws Fixation
- Use the punch template to mark hole positions on the wall.
- Drill holes at the marked locations.
- Insert plastic anchors and then screws, leaving approximately 1/4 inch of the screw exposed.
- Hang the solar light onto the installed screws.
Important Usage & Care Notes
To maximize the efficiency and lifespan of your solar light:
- Charging: For initial use, turn on the light and select a color mode. Charge the unit in direct sunlight for 6-8 hours to ensure sufficient battery power.
- Placement: Position the solar light in a location that receives ample direct sunlight throughout the day. Avoid shaded areas, including those under trees or eaves.
- Maintenance: Periodically clean the solar panel surface to remove dust or debris, as this directly impacts charging efficiency.
- Environmental Factors: Charging performance can vary based on local weather conditions, installation site, and panel orientation. Ensure the panel receives at least 6 hours of sunlight daily.
