SUB 100P

Thank You For Choosing This JBL® Product

Your new JBL® powered subwoofer incorporates a high-performance transducer and built-in amplifier that deliver the powerful, dynamic, and accurate low-frequency performance that makes your film soundtracks and music come alive. With adjustable crossover, phase controls, and automatic turn on/off, it is also simple to connect and set up.

We are confident that this JBL subwoofer will provide every note of enjoyment that you expect. For more in-depth information, visit our website: www.jbl.com.

Included Items

The following items are included with your subwoofer:

• JBL SUB 100P Powered Subwoofer
• Power Cord
• Owner's Manual
• Safety Sheet
• Four (4) carpet spikes for placement on carpeted surfaces.

A diagram shows the subwoofer driver and the four carpet spikes.

Subwoofer Rear-Panel Controls and Connection

Control Descriptions:

1. Power Mode: When set to 'Auto', the subwoofer enters Standby mode and automatically turns on when an audio signal is detected. It returns to Standby mode if no audio signal is detected for approximately 10 minutes. Setting this switch to 'On' keeps the subwoofer powered until the Power Switch is turned 'Off.'
2. On/Standby LED: Indicates the subwoofer's status. Glows blue when On, glows red when in Standby mode.
3. Phase Switch: Determines if the subwoofer driver's piston-like action is in phase with the main speakers. Proper phasing helps avoid sound wave cancellation and enhances bass performance and sonic impact. Experiment with 'Normal' and 'Reverse' settings to find the best sound for your room.
4. Crossover Control: Sets the highest frequency at which the subwoofer reproduces sound (50Hz-150Hz). Adjusting this helps achieve a smooth transition of bass frequencies between the subwoofer and other speakers.
5. Volume: Adjusts the subwoofer's overall volume level. Turn clockwise to increase, counter-clockwise to decrease.
6. Subwoofer (LFE Input): Connect the subwoofer to the dedicated subwoofer / LFE output of a receiver or processor using an LFE cable.
7. Power Switch: Turns the subwoofer on or off. Set to 'Off' to conserve energy when not in use for extended periods.
8. Power Input: Connect the power cord to an active, unswitched electrical outlet. Do not plug into accessory outlets on other audio components.

Connection Options:

To a Receiver or Preamp/Processor with a Low-Pass Filtered Dedicated Subwoofer Output (LFE): Connect the 'SUBWOOFER LFE OUT' from your receiver/processor to the 'SUBWOOFER INPUT' on the JBL SUB 100P using an LFE cable (not included). For this connection, ensure the subwoofer's Crossover control is set fully clockwise. Consult your receiver/processor manual for specific setup instructions.

To a Receiver or Preamp/Processor with Preamp Outputs: Connect the 'PREAMP OUTPUT' from your receiver/processor to the 'SUBWOOFER INPUT' on the JBL SUB 100P using an RCA Y-Adapter cable or a standard RCA cable (not included). For this connection, it is recommended to set the subwoofer's Crossover setting to 80Hz for mid-sized speakers, higher for smaller speakers, and lower for larger floorstanding speakers. Consult your receiver/processor manual for specific setup instructions.

Placing the Subwoofer

Subwoofer performance is highly dependent on its placement in the listening room and its position relative to other speakers. Room acoustics, reflections, and standing waves significantly influence bass output and quality. Experimenting with placement is strongly recommended.

• Placing the subwoofer near a wall generally increases bass.
• Corner placement (1) typically maximizes bass but can also increase the destructive effect of standing waves.
• Placing the subwoofer along the same plane as the left and right speakers (2) can improve integration.
• Placing the subwoofer behind the listening position (3) may also yield good results in some rooms.

To find the best location, temporarily place the subwoofer in the listening position, play music with strong bass content, and move around the room (listening from where the subwoofer would be placed) until you find the spot with the best bass performance.

Operating the Subwoofer

Turning the Subwoofer On and Off

Set the Power Switch to 'On'. Set the Power Mode to 'Auto' for automatic turn-on/standby functionality. The LED indicates status: blue for On, red for Standby. For extended periods of non-use (e.g., vacation), set the Power Switch to 'Off' to conserve energy.

Subwoofer Adjustments: Crossover

The Crossover control (50Hz-150Hz) adjusts the subwoofer's low-pass filter. A higher setting allows the subwoofer to operate at higher frequencies, potentially overlapping more with main speakers. Adjust for a smooth bass transition. If bass seems too strong, try a lower setting; if too weak, try a higher setting.

Subwoofer Adjustments: Volume

Use the Volume control to balance the subwoofer's output with your system's other speakers. Find a 'middle ground' volume that works well for both music and movies. Placement can affect perceived loudness; corner placement tends to increase bass output.

Subwoofer Adjustments: Phase

The Phase switch (Normal/Reverse) determines if the subwoofer driver's motion is in phase with the main speakers. Incorrect phasing can cancel bass frequencies and reduce impact. Listen to music you know well and select the position that provides the clearest sound and maximum impact for percussive instruments.

Using the Supplied Carpet Spikes

Four metal spikes are included for use on carpeted surfaces only. To install:

1. Gently lay the subwoofer on its side on a soft, nonabrasive surface.
2. Screw each spike into the threaded insert in each foot until fully seated.

Note: NEVER drag the subwoofer. Always lift and carry it to its new location.

JBL Arena SUB 100P Overview

The JBL Arena SUB 100P is a 10" (250mm) powered subwoofer designed to deliver powerful bass performance. It features a 100W RMS (200W dynamic) Class-D amplifier, dual rear ports for optimized airflow, and unobtrusive rear-mounted controls for easy setup and integration into your sound system. It offers the signature JBL bass punch and accuracy with an understated, contemporary look.

The Arena SUB 100P is designed to work as part of the JBL Arena series, complementing floorstanding speakers, bookshelf speakers, and center channel speakers for a more powerful system.

Features:

• The signature punch and accuracy of JBL bass
• Understated, contemporary look and feel
• An audio powerhouse at an affordable price
• Just one part of an even more powerful system

What's in the box:

• 1 x JBL Arena SUB 100P
• 1 x Power Cord
• 1 x Owner's Manual
• 1 x Safety Sheet

Product Specifications:

Important Safety Instructions

Read, keep, and follow all instructions. Heed all warnings.

1. Do not use this apparatus near water.
2. Clean only with a dry cloth.
3. Do not block any ventilation openings. Install in accordance with manufacturer's instructions.
4. Do not install near heat sources (radiators, stoves, etc.).
5. Do not defeat the safety purpose of polarized or grounding-type plugs.
6. Protect the power cord from being walked on or pinched.
7. Use only manufacturer-specified attachments/accessories.
8. Use only with specified cart, stand, tripod, bracket, or table. Use caution when moving carts to avoid tip-over.
9. Unplug during lightning storms or when unused for long periods.
10. Refer all servicing to qualified service personnel. Servicing is required for damage (cord, plug, liquid spills, dropped apparatus, etc.).
11. Do not expose to dripping or splashing; ensure no liquid-filled objects are placed on the apparatus.
12. To disconnect completely, remove the power-supply cord plug from the AC receptacle. The mains plug should remain readily operable.
13. Do not expose batteries to excessive heat (sunshine, fire).

Warnings and Cautions:

CAUTION: RISK OF ELECTRIC SHOCK. DO NOT OPEN.

The lightning flash symbol ⚡ indicates the presence of uninsulated "dangerous voltage" within the enclosure that may pose a risk of electric shock.

❗ IMPORTANT INFORMATION: The exclamation point symbol indicates important operating and maintenance instructions.

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE.

FCC and IC Statements (USA and Canada)

This device complies with Part 15 of the FCC Rules and Industry Canada license-exempt RSS standard(s). Operation is subject to two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by HARMAN could void the user's authority to operate the equipment.

FCC/IC Radiation Exposure Statement

This equipment complies with FCC/IC RSS-102 radiation exposure limits for an uncontrolled environment. Install and operate with a minimum distance of 20cm between the radiator and your body.

For Products with Radio Receivers That Can Use an External Antenna (USA ONLY):

If an outside antenna or cable system is connected, ensure it is properly grounded according to the National Electrical Code (NEC) for protection against voltage surges and static charges.

For CD/DVD/Blu-ray Disc™ Players:

Caution: This product uses a laser system. To prevent direct exposure to the laser beam, do not open the cabinet enclosure or defeat safety mechanisms. Do not stare into the laser beam.

CLASS 1 LASER PRODUCT

For All EU Countries: Prevention of Hearing Loss

Caution: Permanent hearing loss may occur if earphones or headphones are used at high volume for prolonged periods. Do not listen at high volume levels for long periods to prevent possible hearing damage.

WEEE Notice

The Waste Electrical and Electronic Equipment (WEEE) Directive aims to promote reuse, recycling, and recovery of electrical equipment. The WEEE logo (♻️ [WEEE Symbol]) indicates that this product must not be disposed of with household waste. Dispose of electronic waste at designated collection points. Contact your local authorities or retailer for information.

RoHS Compliance

This product is in compliance with Directive 2011/65/EU of the European Parliament and of the Council.

For Products That Include Batteries: EU Batteries Directive 2006/66/EC

This directive governs the collection, treatment, recycling, and disposal of batteries. Batteries must be disposed of in an environmentally sound manner. Contact local waste-management officials for information. Batteries containing more than 0.0005% mercury, 0.002% cadmium, or 0.004% lead are marked with chemical symbols: Hg, Cd, Pb.

WARNING: Danger of explosion if battery is incorrectly replaced. Do not disassemble, crush, puncture, short external contacts, or expose to excessive heat.

DO NOT INGEST BATTERY, CHEMICAL BURN HAZARD. This product may contain a coin/button cell battery. If swallowed, it can cause severe internal burns and can lead to death. Keep batteries away from children.

Declarations of Conformity

For All Products Except Those with Wireless Operation: HARMAN International declares this equipment complies with EMC 2004/108/EC, LVD 2006/95/EC, ErP 2009/125/EC, and RoHS 2011/65/EU Directives. Consult the support section of the HARMAN website for the declaration of conformity.

For All Products with Wireless Operation: HARMAN International declares this equipment complies with Directive 1999/5/EC, ErP 2009/125/EC, and RoHS 2011/65/EU Directives. Consult the support section of the HARMAN website for the declaration of conformity.

Manufacturer Information:

HARMAN International Industries, Incorporated
8500 Balboa Boulevard, Northridge, CA 91329 USA
www.jbl.com

CE