Aosu Wireless Security Camera System

Getting Started

For HomeBase Setup

• [HomeBase unit]
• [Power adapter for HomeBase]
• [Ethernet cable]

For Wireless Camera Setup

• [Wireless camera]
• [Micro-USB cable for charging]
• [Mounting bracket]
• [Mounting base with screws and anchors]

The quantity of cameras and accessories may vary by package.

The HomeBase power adapter varies by region.

Product Overview

HomeBase

Diagram of the HomeBase unit.

• USB Ports
• Ethernet Port
• Power Port
• Sync Button
• Status LED Indicator
• Speaker

Wireless Security Camera

Diagram of the wireless camera.

• Status LED Lens
• Spotlight
• Microphone
• Motion Sensor
• Speaker
• SYNC Button
• USB-C Port

Connecting the HomeBase

Connecting the HomeBase to the Internet

1. Plug in the HomeBase and connect it to your home router using the included Ethernet cable.

Illustration showing HomeBase connected to a router via Ethernet and power.

2. When the HomeBase is ready for setup, the LED indicator will turn blue (this may take up to 1 minute).

Illustration of the HomeBase unit with a blue LED indicator.

System Setup

Download the app and set up your system, which is ready for installation.

Download the *aosu* app from the App Store (for iOS devices) or Google Play (for Android devices).

QR code for App Store download, 'Available on the App Store' badge, 'Get it on Google Play' badge.

Create an account in the aosu app and follow the on-screen instructions to complete the setup.

Illustration of a smartphone displaying the aosu app interface, with a wireless camera and HomeBase in the background.

Camera Installation

Find a Good Mounting Location

To find a suitable mounting location for your wireless security camera, you need to check the Wi-Fi signal strength.

1. Open the 'aosu' app and navigate to Camera Settings > Mounting Guide.
2. To test the Wi-Fi signal strength, take the camera and your phone to the location where you want to install the camera.

If the wireless network is weak, move the camera closer to the HomeBase.

Screenshot of the 'aosu' app showing a 'Test Signal' screen. It indicates 'Great' Wi-Fi signal strength and states 'The current location is good to mount the camera.' with a 'Next' button.

Choose Height and Location

Mount the wireless security camera 7-10 ft (2-3 m) above the ground. This height optimizes motion sensor detection for the wireless security camera. Do not place the wireless security camera in direct sunlight.

Diagram illustrating the camera's field of view and motion detection zone. It shows a detection range of up to 10 m (30 ft) and an optimal height of 7-10 ft (2-3 m).

Mounting the Camera

The camera can be mounted indoors or outdoors.

1. Drill holes using a 15/64 inch (5.95 mm) drill bit, then insert anchors. Anchors are required for walls made of hard materials such as concrete, brick, or stucco. Attach the mounting base to the wall.

Illustration showing drilling holes into a wall, inserting anchors, and attaching a mounting base with screws.

2. Screw the camera onto the mounting bracket.

Illustration showing the camera being screwed onto a mounting bracket.

3. Securely attach the camera to the mounting base.

Illustration showing the camera being attached to the mounting base.

4. Adjust the viewing angle by checking the live feed in the 'aosu' app.

Illustration showing adjustment arrows indicating how to tilt and pan the camera, with a note to check the live feed in the app.

Charging the Camera

Method 1

Diagram showing the HomeBase unit and a wireless camera, with a dotted line suggesting a connection for charging or initial setup.

Method 2

Connect using a 5V/2A power adapter and USB cable.

Diagram showing a 5V/2A power adapter plugged into a wall socket, connected via a USB cable to the camera's USB-C port.

Safety Statements

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: (1) Reorient or relocate the receiving antenna. (2) Increase the separation between the equipment and receiver. (3) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. (4) Consult the dealer or an experienced radio/television technician for help.

FCC RF Exposure Statement

The device has been evaluated to meet general RF exposure requirements. The device can be used in fixed/mobile exposure conditions. Minimum separation distance is 20 cm.

Declaration of Conformity

This product complies with the radio interference requirements of the European Community.

Glazero Limited declares that this device is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. The Declaration of Conformity can be found at: https://www.aosulife.com/. This product may be used in all EU member states.

Do not use the device in environments with excessively high or low temperatures, never expose it to strong sunlight or extreme environments.

The suitable operating temperature for the HomeBase and accessories is -10°C to 45°C. The suitable operating temperature for the video doorbell and accessories is 20°C - 40°C.

When charging the device, place it in an environment with normal room temperature and good ventilation.

It is recommended to charge the device in an environment with temperatures between 5°C and 25°C.

Radiofrequency exposure information: The maximum permissible exposure level (MPE) was calculated based on a distance d = 20 cm between the device and the human body. To maintain compliance with RF exposure requirements, use the product while maintaining a distance of 20 cm between the device and the human body.

For HomeBase: Wi-Fi Operating Frequency Range: 2412-2472 MHz; Wifi Max Output Power: 17.13dBm (EIRP). Wi-Fi Operating Frequency Range: 5150MHz - 5850MHz, Wifi Max Output Power: 5150MHz - 5850MHz: 13.7 dBm (EIRP).

For video doorbell: Wi-Fi Operating Frequency Range: 2412-2472MHz; Wi-Fi Max Output Power: 18.30 dBm.

Recycling Information

This product is designed and manufactured with high-quality materials and components that can be recycled and reused.

[recycling symbol] This symbol means that the product must not be disposed of with household waste and must be handed over to an appropriate recycling collection point. Proper disposal and recycling help protect natural resources, human health, and the environment. For more information on disposal and recycling of this product, contact your local municipality, waste disposal service, or the store where you purchased this product.

Battery Warning

• Replacing the battery with an incorrect type may disable the safety feature (for certain types of lithium batteries).
• Disposing of the battery in fire or a hot oven, or mechanically crushing or cutting the battery, may result in an explosion.
• Leaving the battery in an environment with extremely high temperatures may cause an explosion or leakage of flammable liquid or gas.
• A battery subjected to extremely low air pressure may cause an explosion or leakage of flammable liquid or gas.

IC Warning (Canada)

Instructions for use for license-exempt radio apparatus must contain the following or equivalent notice in a conspicuous place in the instructions for use or on the apparatus or both.

This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.

Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.

IC SAR Warning

This equipment must be installed and operated with a minimum distance of 20 cm between the radiator and your body. When installing and using this device, maintain a distance of at least 20 cm between the radiator and the body.

Customer Service

Warranty

12-month limited warranty (the actual warranty period is subject to local laws and regulations).

Email Us

Customer Support: support@aosulife.com

Call Us

• United States: +1 -866-905-9950 Mon-Fri 9AM-5PM (PST)
• United Kingdom: Germany: +44-20-3885-0830 Monday to Friday from 9:00 to 17:00 (GMT): +49-32-22J 094692 Monday to Friday from 9:00 to 17:00 (CET)
• Japan: +81-50-5840-2601 Monday to Friday from 9:00 to 17:00 (JST)

Social Media

• Facebook: @aosulife
• Twitter: @aosulife
• YouTube: @aosulife