PROFLO Pull-down Kitchen Faucet

Model Numbers: PFXC7512CP, PFXC7512ZBN

Installation Instructions

Follow these instructions carefully to install your PROFLO Pull-down Kitchen Faucet.

Cautionary Tips

Always turn off the water supply before removing the existing faucet or replacing any part of the faucet. Open the faucet handle to relieve water pressure and ensure that water is completely shut off.

Care Instructions

To preserve the finish of your faucet, apply non-abrasive wax. Any cleaners should be rinsed off immediately. Do not use abrasive cleaners on the faucet.

Tools and Materials You May Need

Goggles (Safety Glasses)
Wrench (Adjustable Wrench)
Phillips Screwdriver
Basin Wrench
Sealant Tape
Silicone

Installation Steps

Step 1: Base Assembly

1a. Install the base ring with washer (1) to the bottom of the spout. If installing the faucet with an escutcheon (decorative plate), begin with step 1b.

1b. Install the base ring with washer (1) to the bottom of the spout. Place the escutcheon assembly (2) onto the faucet.

Step 2: Mounting the Faucet

Place the new faucet through the hole in the top of the sink. From under the sink, slide the seal washer (1), metal washer (2), and mounting nut (3) onto the threaded shank. Hand-tighten the nut onto the shank. Secure the nuts in position by tightening screws (4).

Step 3: Connecting the Hose

Install the quick connector (1) to the outlet hose (2).

Step 4: Attaching the Pull-Down Hose and Weight

Install the pull-down hose (1) to the quick connector (2). Press the retainer clip of the quick connector (2) with your hand for a secure connection. Attach the weight (3) to the appropriate location on the pull-down hose (1).

Step 5: Connecting Water Supplies

Connect the faucet to the water supplies using hot and cold angle valves.

Step 6: Checking Stream Function

Turn on the faucet handle to check the operation. This handle position is for the stream function.

Step 7: Checking Spray Function

Press the spray head button to switch to the other position, as indicated by an arrow, to check for operation. This position is for the spray function.

Maintenance

If the faucet leaks from the spout outlet, shut off the water supplies and replace the cartridge (1). Ensure the cartridge (1) is installed correctly for proper handle rotation.

Parts List

No.	Part	Part Number
1	Hose	OBPF85G0M014202**
2	Spray head	OBPF65F0014000**
3	Flange	OBPF15Y0261600**
4	Deck plate	OBPF15Y0262700**
5	Quick connect	OBPF85Y0262600PL0
6	Weight	OBPF15X0241302PL0
7	Cartridge	OBPF25D0M0023PL
7	Handle assembly	OBPF75Y0262500**

* Specify Finish

	PROFLO Single Handle Pre-Rinse Kitchen Faucet Installation Guide Comprehensive installation instructions and care guide for the PROFLO Single Handle Pre-Rinse Kitchen Faucet (models PFXC5012CP, PFXC5012ZBN, PFXC5012MB), including necessary tools, parts, and maintenance tips.
	PROFLO PFXC5150 Single Handle Pull-out Kitchen Faucet Parts Breakdown Detailed parts breakdown for the PROFLO PFXC5150 Single Handle Pull-out Kitchen Faucet, including model numbers, part numbers, and material types. Features warranty information and compliance standards.
	PROFLO PFXC1701 Kiger Series Single Handle Kitchen Faucet - Features, Specifications, and Warranty Detailed information on the PROFLO PFXC1701 Kiger series single handle kitchen faucet, including product features, model numbers, specifications, optional parts, and warranty information. Compliant with ASME A112.18.1, NSF 61, CUPC/IAPMO, and ADA standards.
	PROFLO Tub and Shower Faucets: PFLL43A and PFLL5002A Product Overview Detailed information on PROFLO's Three Handle Tub & Shower Faucet (PFLL43A) and Roman Tub Faucet (PFLL5002A), including features, specifications, and available parts. Compliant with ANSI A112.18.1M, NSF-61, and UPC/IAPMO standards.
	PROFLO PF4001 Pressure Balance Tub and Shower Faucet Valve with Stop - Specifications Technical specifications, product features, model details, and warranty information for the PROFLO PF4001 Pressure Balance Tub and Shower Faucet Valve with Stop, including dimensions and compliance standards.
	Proflo PF4001 Series Accufit Pressure Balance Tub and Shower Faucet Valve with Stop - Specifications and Features Detailed specifications, features, and flow rate data for the Proflo PF4001, PF4001C, PF4001F, PF4001P, and PF4001WP Accufit Pressure Balance Tub and Shower Faucet Valves with Stop. Includes product features, optional parts, certifications, and dimensional diagrams.
	Proflo Two Handle Roman Tub Faucet Installation Guide Official installation instructions for the Proflo Two Handle Roman Tub Faucet (Model PF5270CP/ZBN). Includes care tips, required tools, step-by-step assembly, and troubleshooting.
	Proflo PFWSC3950 Single Handle Lavatory Faucet Parts Breakdown Detailed parts breakdown for the Proflo SPIERS PFWSC3950 Single Handle Lavatory Faucet, including part names, numbers, and materials. Features an exploded view diagram and warranty information.