Hi-Spec 12V Power Drill Driver

Important Information

Important! It is essential that you read the instructions in this manual before operating this machine.

General Power Tool Safety Warnings

WARNING

Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury.

Save all warnings and instructions for future reference.

The term "power tool" in the warnings refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool.

1. Work Area Safety

• Keep work area clean and well lit. Cluttered or dark areas invite accidents.
• Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes.
• Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control.

2. Electrical Safety

• Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets will reduce risk of electric shock.
• Avoid body contact with earthed or grounded surfaces, such as pipes, radiators, ranges and refrigerators. There is an increased risk of electric shock if your body is earthed or grounded.
• Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock.
• Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase the risk of electric shock.
• When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric shock.
• If operating a power tool in a damp location is unavoidable, use a residual current device (RCD) protected supply. Use of an RCD reduces the risk of electric shock.

3. Personal Safety

• Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating power tools may result in serious personal injury.
• Use personal protective equipment. Always wear eye protection. Protective equipment such as dust mask, non-skid safety shoes, hard hat or hearing protection used for appropriate conditions will reduce personal injuries.
• Prevent unintentional starting. Ensure the switch is in the off-position before connecting to power source and/or battery pack, picking up or carrying the tool. Carrying power tools with your finger on the switch or energising power tools that have the switch on invites accidents.
• Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal injury.
• Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations.
• Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves away from moving parts. Loose clothes, jewellery or long hair can be caught in moving parts.
• If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used. Use of dust collection can reduce dust-related hazards.

Drill safety Warnings: Wear ear protectors when impact drilling. Exposure to noise can cause hearing loss.

Power Tool Use and Care

• Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed.
• Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled with the switch is dangerous and must be repaired.
• Disconnect the plug from the power source and/or the battery pack from the power tool before making any adjustments, changing accessories or storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally.
• Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users.
• Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tool's operation. If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools.
• Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges.
• Use the power tool, accessories and tool bits etc. in accordance with these instructions, taking into account the working conditions and the work to be performed. Use of the power tool for operations different from those intended could result in a hazardous situation.

Battery Tool Use and Care

• Recharge only with the charger specified by the manufacturer. A charger that is suitable for one type of battery pack may create a risk of fire when used with another battery pack.
• Use power tools only with specifically designated battery packs. Use of any other battery packs may create a risk of injury and fire.
• When battery pack is not in use, keep it away from other metal objects, like paper clips, coins, keys, nails, screws or other small metal objects, that can make a connection from one terminal to another. Shorting the battery terminals together may cause burns or a fire.
• Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact accidentally occurs, flush with water. If liquid contacts eyes, additionally seek medical help. Liquid ejected from the battery may cause irritation or burns.

Service

• Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained.

Getting Started

1. Step 1: Inserting and Securing a Drill Bit

   Open the drill chuck by twisting it. Insert the desired drill bit or screwdriver bit into the chuck. Twist the chuck in the opposite direction to securely grip the bit. A checkmark icon ✔️ indicates correct insertion, while an 'X' icon ❌ indicates incorrect insertion or a loose fit.

2. Step 2: Selecting Drill Bits

   Choose the appropriate drill bit or screwdriver bit for the material and task. A selection of common bits is shown.

3. Step 3: Attaching the Battery Pack

   Align the battery pack with the tool's base. Slide the battery pack upwards into the tool's battery housing until it clicks securely into place. A lock icon ? indicates the battery is properly secured.

4. Step 4: Adjusting Torque and Clutch Settings

   Rotate the collar located behind the chuck to select the desired torque setting (indicated by numbers, e.g., 1-18) for screw driving. This setting controls the amount of rotational force applied. The symbol indicates clutch adjustment for precise screw depth.

5. Step 5: Selecting Speed and Direction

   Use the speed selector switch, often indicated by a turtle icon ? for low speed and a rabbit icon ? for high speed, to choose the appropriate speed for drilling or driving. The forward/reverse switch allows you to change the direction of rotation (▶️ for forward, ◀️ for reverse).

Specifications

Charging

The drill driver must be fully charged up before use.

1. Insert the charging plug into the rear socket of the battery.
2. Connect the charger to a suitable mains socket outlet. The red charging light comes on.
3. NB. The charger may become warm and buzz slightly during charging. This is normal and does not indicate a fault.
4. When the battery is fully charged, the green light will light up and the red light will go out.
5. After charging, unplug the charger from the wall outlet.

Note:

• The operation time of a new battery will ramp up as it is properly used and the batteries recharged.
• When you charge a battery pack which is new or has not been used for a long period of time, it may not accept a full charge until after discharging it completely and recharging a couple of times.
• If you charge a battery from a just operated tool or a battery which has been exposed to direct sunlight or heat for a long time, the charging light may light in a red colour. If this occurs, wait for a while. Charging will begin after the battery cools down.

General Safety Rules (For All Battery Operated Tools)

WARNING

Read and understand all instructions. Failure to follow all instructions listed below, may result in electric shock, fire or serious personal injury.

Work Area

• Keep your work area clean and well lit. Cluttered benches and dark areas can cause accidents.
• Do not operate power tools in exposed atmospheres, such as in the presence of flammable liquids, gasses, or dust. Power tools create sparks which may ignite the dust.
• Keep bystanders, children, and visitors away while operating power tools. Distractions can cause you to lose control.

Maintenance

CAUTION

• Always be sure the tool is switched off and the battery cartridge is removed before attempting inspection or maintenance.
• To maintain product SAFETY and RELIABILITY, repairs or any other maintenance or adjustment should be performed by professional Service Centers, always using recommended replacement parts.

Contact Information

Website: www.hi-spec.tools

Email: support@hi-spec.tools

UK Address:

Apollo Fulfilment Ltd., 1 Clohogue, Tempo, Enniskillen, Co.Fermanagh, BT943EQ, UK.

US Address:

Hi-Spec Products Inc. 303 S Broadway Ste, 200-518 Denver, CO. 80209, US.

Manufacturing Address:

Diversitech Manufacturing Corporation, TongEr Village, LinPu Town, Xiaoshan, Hangzhou, 311251, People's Republic of China