Lovense Sex Machine Assembly & Set Up Instructions
Packing List
- Leg Base x 2
- Leg Rod x 2
- Short Rod x 1
- Long Rod x 1
- Hex Wrench (6 mm & 8 mm) x 2
- Main Body x 1
- Dildo (L) x 1
- Dildo (S) x 1
- Control Box x 1
- 24V Power Supply x 1
- Power Plug x 1
- Universal Power Adapter x 1 (not included in US packages)
- Rubber Cap x 2
Assembling
Step 1: Assemble the Base
Connect the two Leg Bases using the two Leg Rods to form the base structure.
Step 2: Attach Main Body
Place the Main Body onto the assembled base structure.
Step 3: Secure Main Body
Use the 6mm Hex Wrench to loosen a bolt, ensuring it remains in place. Insert the rods fully into their designated slots. Tighten the bolt securely. Gently pull the rod to confirm it is properly installed and secure.
Step 4: Connect Dildo and Control Box
Attach the selected Dildo (Large or Small) to the main body. Connect the Control Box to the main body using its cable.
Step 5: Connect Power
Connect the 24V Power Supply to the Control Box. Plug the Power Plug into the Power Supply and then into a wall outlet using the Universal Power Adapter if necessary.
Adjusting the Stroking Length
Note: For solo play, the longer rod can be moved to the other end to adjust the stroke range.
Step 1: Power Off
Ensure the device is turned off using the power switch [power off].
Step 2: Locate Adjustment
Identify the stroking length adjustment mechanism on the Main Body.
Step 3: Adjust Length
Use the 6mm Hex Wrench to loosen the bolt, ensuring it remains in place. Adjust the internal mechanism to set the desired stroking length. Tighten the bolt securely to lock the position.
Step 4: Stroke Range
The mechanism allows for adjustment between the shortest and longest stroking lengths.
Other Possible Positions
The Lovense Sex Machine can be configured in various positions to suit different preferences:
- Option 1: Standard upright position.
- Option 2: Forward-angled position.
- Option 3: Backward-angled position.
- Option 4: Sideways-tilted position.
