TPUH652 USB-C KVM Extender over HDBaseT 3.0

Preface

Read this user manual carefully before using the product. Pictures shown in this manual are for reference only. Different models and specifications are subject to real product.

This manual is only for operation instruction, please contact the local distributor for maintenance assistance. The functions described in this version were updated till October, 2022. In the constant effort to improve the product, PTN reserves the right to make functions or parameters changes without notice or obligation. Please refer to the dealers for the latest details.

Safety Precautions

To ensure the best from the product, please read all instructions carefully before using the device. Save this manual for further reference.

• Unpack the equipment carefully and save the original box and packing material for possible future shipment.
• Follow basic safety precautions to reduce the risk of fire, electrical shock and injury to persons.
• Do not dismantle the housing or modify the module. It may result in electrical shock or burn.
• Using supplies or parts not meeting the products' specifications may cause damage, deterioration or malfunction.
• Refer all servicing to qualified service personnel.
• To prevent fire or shock hazard, do not expose the unit to rain, moisture or install this product near water.
• Do not put any heavy items on the extension cable in case of extrusion.
• Do not remove the housing of the device as opening or removing housing may expose you to dangerous voltage or other hazards.
• Install the device in a place with fine ventilation to avoid damage caused by overheat.
• Keep the module away from liquids.
• Spillage into the housing may result in fire, electrical shock, or equipment damage. If an object or liquid falls or spills on to the housing, unplug the module immediately.
• Do not twist or pull by force ends of the cable. It can cause malfunction.
• Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power to the device before cleaning.
• Unplug the power cord when left unused for a long period of time.
• Information on disposal for scrapped devices: do not burn or mix with general household waste, please treat them as normal electrical wastes.

Product Introduction

The TPUH652 is an USB-C KVM Extender Kit that allows one USB channel to be transmitted over distances of up to 40m at 4K@60Hz and 70m at 4K@30Hz via CAT6 cable.

The USB-C KVM Extender Kit includes one transmitter and one receiver. The transmitter features one USB-C input and one HDBaseT3.0 output. For the USB-C input, it provides an AV ideal interface for connecting to the Macbook or other device with SlimPort output. And there's also a USB-C port for charging devices. The receiver features one HDMI output, one HDBaseT3.0 input and 4 USB 2.0 ports for connecting with KVM device such as camera, keyboard and mouse.

Features

• USB-C input supports 4K@60Hz 4:4:4.
• Supports to transmit up to 40m at 4K@60Hz and 70m at 4K@30Hz.
• Supports bi-direction 24V PoC power supply.
• TX supports USB-C charging port to charge input device.
• 5 USB 2.0 ports for connecting with KVM device.
• Micro-USB for firmware upgrade.

Package List

• 1 x Transmitter
• 1 x Receiver
• 1 x Power Adaptor (24VDC, 1.25A)
• 4 x Mounting Ears & 4 x Screws
• 8 x Rubber feet
• 1 x User Manual

Specification

Panel Description

Transmitter

The transmitter unit features the following ports and indicators:

• USB-C IN (①): Connects to the Macbook or other device with SlimPort output.
• DEVICE (②): USB 2.0 Ports for connecting devices.
• POWER (③): Connects to the adapter to charge the USB-C IN device.
• FW (④): Micro-USB port for firmware upgrade.
• HDBT OUT (⑤): HDBaseT 3.0 output connector.
• DC 24V (⑥): DC connector for the power adapter connection.
• POWER LED (⑦): The LED illuminates green when the power is connected.

Textual description of the transmitter panel drawing: The drawing shows the front and rear panels of the transmitter. The front panel has USB-C IN (500mA), DEVICE, POWER, and FW ports. The rear panel has HDBT OUT (RJ45), DC 24V input, and status LEDs (LINK, HDCP).

Receiver

The receiver unit features the following ports and indicators:

• HDMI OUT (①): Connects to the HDMI display.
• DEVICE (②): 4 USB 2.0 Ports for connecting KVM devices (e.g., keyboard, mouse).
• HDBT IN (③): HDBaseT 3.0 input connector, connects to the HDBT OUT port of the transmitter via a CATx cable.
• DC 24V (④): DC connector for the power adapter connection.
• POWER LED (⑤): The LED illuminates green when the power is connected.

Textual description of the receiver panel drawing: The drawing shows the front and rear panels of the receiver. The front panel has HDMI OUT, DEVICE (4x USB 2.0), and status LEDs (LINK, HDCP). The rear panel has HDBT IN (RJ45) and DC 24V input.

System Connection

The following diagram illustrates a typical input and output connection that can be utilized with the extender:

Textual description of the system connection diagram: The diagram depicts a conference room setup. A laptop is connected to the TPUH652 transmitter via USB-C and a speakerphone is also connected to the laptop. The transmitter is connected via a CATx cable (labeled CATX) to the receiver. The receiver is connected to a display and a USB camera (labeled USB Camera). The diagram shows the flow of USB and video signals from the laptop to the display and camera.

Panel Drawing

The panel drawings provide detailed views of the transmitter and receiver units, including dimensions and port layouts.

Textual description of panel drawings: The drawings illustrate the physical dimensions of the transmitter and receiver. The transmitter measures 90mm (width) x 24mm (height) x 140mm (depth). The receiver measures 90mm (width) x 24mm (height) x 120mm (depth). Both units show the placement of their respective ports (USB-C IN, DEVICE, POWER, FW on transmitter; HDMI OUT, DEVICE on receiver) and rear panel connections (HDBT OUT, DC 24V on transmitter; HDBT IN, DC 24V on receiver). Mounting ears and screws are also indicated.