DuMor Rabbit Cage Assembly Manual

Parts List

Assembly Instructions

1. Remove your new DuMor rabbit cage from the box and set it on a flat surface. The door located on the front panel must be locked in a closed position to keep it secured during assembly. (Refer to Figure A: A wireframe drawing of the DuMor rabbit cage, illustrating the front panel with its secured door.)
2. Unfold the front and back panels completely and set them on the ground. (Refer to Figure B: Two views of the DuMor rabbit cage during assembly. The first shows the unfolded front and back panels. The second shows the panels being folded upwards.) Fold the front (door panel) and back panel up to the inside of the cage and pull back into panel clips on the top and sides. Bend the tab on the panel clips slightly to fully secure in place. (Refer to Figure C: A close-up view of the metal clips used to connect the cage panels, demonstrating how to bend the tabs for a secure fit.)