Lippert Components Limited Warranty (North American OEM Sales)

Introduction

This Limited Warranty ("Warranty") outlines applicable coverage and claim procedures for Products, as defined herein, sold by Lippert Components, Inc. or its subsidiaries or affiliates (the direct seller being the only warrantor referenced herein as "Warrantor", "we", "us" or "our").

Coverage

Subject to these terms, Lippert Components warrants ONLY to you, the original equipment manufacturer ("OEM", "you" or "your"), that the products that we manufacture, distribute and/or sell to you that are not already covered by a separate written warranty from another manufacturer (the "Product(s)") will be free from defects in materials and workmanship at the time of sale. This Warranty will be honored for a period of one (1) year from the date of retail purchase, and covers only Products sold and used in the United States and Canada.

Service

For Products having a covered defect within the Warranty period, Lippert Components will, in its sole and absolute discretion, repair or replace the Product with a new or refurbished component, or provide a pro rata refund of that portion of the Product. Labor will be allowed if a designated flat rate time is outlined by Lippert Components and will be limited to the published flat rate amount. There is no other warranty.

Notice Requirements for Claims

No remedy will be required or offered unless Lippert Components receives written notice of a claimed defect. Any claim of defect, including without limitation under this Warranty, must be made in writing, with full particulars, promptly after the defect was or reasonably should have been discovered, and in any event no later than sixty (60) days of its discovery. In the event of any accident, injury to person, damage to property, or other loss involving a Product, Lippert Components must be notified in writing within thirty (30) days of the incident or within ten (10) days of notification to you, whichever is earlier. In the event of any survey, test, or inspection to be conducted on a Product, Lippert Components must be notified in writing immediately so that Lippert Components, at its sole election, may participate in that activity or conduct its own survey, test, or inspection in advance. Your written notice must describe the defect, provide the customer's name and address, state the location of the Product, and provide full particulars. As a condition of coverage, Lippert Components must be provided access to the original Product for inspection, testing, or other work at its discretion. The Product must remain unmodified. Claims for Products (or any components thereof) that are not in their original form will not be considered. Failure to give proper or timely notice of a claimed defect, or failure to return the defective Product, or performing any modification, self-help, or alteration of the Product, without Lippert Components' prior written approval, will constitute an absolute waiver and release of all your claims and rights under this Warranty.

Transferability

This Warranty is NOT assignable OR transferable. This Warranty extends ONLY to you, the original OEM purchaser purchasing a Product directly from Lippert Components' facilities, and will NOT be construed to extend to any third-party, including without limitation the ultimate retail purchaser or consumer of an end product. You may NOT represent to anyone, including your customer or an end consumer, that this Warranty extends to them.

Limitations of Liability

There is NO WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, to the full extent disclaimer is permitted by law. In any event, any implied warranty that may arise by law is limited in duration to the term herein and to the covered Products. The repair, replacement, or refund provided herein is exclusive and in lieu of all other remedies. Except as provided in this Warranty, all Products are being sold "AS IS" and "WITH ALL FAULTS." All risks as to product quality or performance not contemplated by this Warranty will be borne exclusively by you, the purchaser. If a Product proves defective after its purchase, you, not Lippert Components, assume the entire cost of all necessary servicing or repair that is not covered under this Warranty. Lippert Components will NOT be liable for costs of removal or reinstallation of the Products, or any expense related to reinstallation. Lippert Components will have NO liability to anyone for consequential, special, incidental, indirect, exemplary, or punitive damages of any kind whatsoever, including without limitation property damage, lost profits, labor costs, or any other pecuniary damage, whether due to any defect in the Products, breach, delay, non-delivery, non-performance, recall, or any other reason. All claims for negligence and for failure of essential purpose are expressly waived and released. Under no circumstances will Lippert Components' liability for any defect in the goods, whether based on contract, tort, warranty, or any other theory, exceed the purchase price of the Products. There are NO THIRD-PARTY BENEFICIARIES to the Warranty's terms. You waive any right to a jury trial and class action relating to this Warranty, and may not join or consolidate claims as a representative of a class action or in a private attorney general capacity. These provisions provide specific legal rights and limitations. Some may not apply based on state or federal law, and other legal rights may exist.

Exclusions

This Warranty only covers the Products. Due to the intended use of the Products, any and all items and components not sold by Lippert Components but attached to, incorporated into, or using the Products carry NO WARRANTY WHATSOEVER from Lippert Components regardless of circumstance. Lippert Components will not be liable for any defects, whether due to workmanship, materials or any other reason whatsoever, for those items and components not sold by Lippert Components. This Warranty also does not cover customer instruction, installation and labor (except as provided herein), parts supplied by others, abuse, misuse, neglect, improper installation or improper repair by anyone other than Lippert Components, improper usage, overloading, accidents, unreasonable use, improper loading, improper operation, improper repair, improper maintenance, normal wear and tear, color fade, mold, mildew, corrosion, rust formation, modifications, or attempted repair by anyone other than a qualified repair facility. This Warranty does not cover chemical damage caused by acids, fuel, oil, or other chemicals. Use of Lippert Components' Products in or as part of a unit in a rental fleet, or for a commercial purpose, voids your rights under this Warranty.

Indemnity

You agree to defend, indemnify and hold Lippert Components, as well as its officers, agents, employees, and representatives, harmless from and against all claims, causes of action, liabilities, losses, damages, judgments, and proceedings, whether based in contract, quasi-contract, subrogation, tort, strict liability, or any other legal or equitable theory, including without limitation all expenses, costs, damages or injury to person or property, and attorney fees incident thereto, arising from or relating to (i) your improper handling, storage or installation of Lippert Components' Products; (ii) your modification of the Products in any way after delivery; or (iii) your extension or attempt to extend, assign, transfer, or pass this Warranty through to anyone else. Lippert Components reserves the right to choose its own counsel.

Statute of Limitations

Any action, lawsuit or other proceeding, under this Warranty or otherwise, related to the Product must be commenced within one (1) year after the earlier of (a) the expiration of the Warranty coverage period, (b) Lippert Components' alleged failure to repair the defect at issue; or (c) the date on which your claim accrues under applicable law. Unless prohibited by law, the performance of repairs will not prevent the limitations period from expiring, nor will any tolling or estoppel doctrine apply. This Warranty does not extend to future performance.

Applicable Law & Venue

This Warranty will be governed by and construed in accordance with the laws of the State of Indiana without regard to principles of conflicts of law. Any disagreement, dispute, controversy, or claim arising out of or relating to this Warranty must be submitted to binding arbitration in accordance with the Rules of the American Arbitration Association. Judgment upon the award may be entered in any court having jurisdiction thereof. In the event you bring any claim against Lippert Components in violation of this Warranty or for claims waived or released under this Warranty, you agree to pay Lippert Components' attorney and paralegal fees and costs to defend such suit.

Modifications

Lippert Components will not be liable for commitments, promises, or agreements made by any employee, agent, or dealer that is not in accordance with this Warranty. The current warranties and terms outlined on the Warrantor's website (www.lci1.com) applicable on the date of purchase take precedence over any other warranties, whether oral or written. Lippert Components reserves the right to alter its warranties from time to time, as the laws and its business needs and industry change. Any conditions or exceptions that may be stated in any communication or document to Lippert Components from any entity or individual, including but not limited to the retail purchaser or consumer, shall be of no effect unless specifically agreed to in writing and hand-signed by an authorized representative.

Miscellaneous

Any legally or otherwise invalid provision hereof will be considered severable, with all remaining provisions enforceable. Lippert Components has all rights and remedies given to sellers by applicable law, and its rights and remedies are cumulative and may be exercised from time to time. No waiver by Lippert Components of any provision of this Warranty will be effective unless in writing, nor will it operate as a novation or waiver of any other provision or affect its right to exercise thereafter any right or remedy. Lippert Components will not lose any right because it has not exercised that right in the past.

Contact Information

For questions and claims, contact Lippert Components, Inc., Attn. Warranty Dept., 1902 West Sample Street, South Bend, Indiana 46619. The telephone number to obtain the name and address of the service and repair facility nearest you is 1-574-537-8900. You may also email your claim to customerservice@lci1.com. To process your claim, Lippert Components will need the following information: vehicle identification number (VIN), date of manufacture, date of purchase, the make and full model number, pictures of alleged defect, and description of alleged defect. Please include this information with any correspondence and have this information available when you call.

PDF preview unavailable. Download the PDF instead.

oem standard 1 yr warranty 2017 Microsoft Word 2016 Microsoft Word 2016

Related Documents

Preview Lippert IsoFlex™ Pin Box OEM Installation Manual
Official OEM installation manual for the Lippert IsoFlex™ Pin Box, providing step-by-step instructions for removal, installation, operation, and safety procedures for fifth-wheel trailers. Includes troubleshooting and hitching guidance.
Preview Solera Classic Awning OEM Installation Manual (AU)
This manual provides detailed instructions for the OEM installation of the Solera Classic Awning (AU). It covers preparation, resources required, sidewall and pop-top mounting, and final assembly steps for recreational vehicle units.
Preview Lippert Sofa Slideout System Operation and Service Manual
Comprehensive operation and service manual for the Lippert Sofa Slideout System, covering system overview, operation, maintenance, troubleshooting, and wiring diagrams.
Preview Lippert Components 2018 Product Catalog
Explore the 2018 Product Catalog from Lippert Components, featuring innovative slide-outs, leveling systems, entry doors, steps, and space solutions for recreational vehicles and leisure industries. Discover LCI's extensive range of high-quality components.
Preview Schwintek InWall Slideout System Owner's Manual & Troubleshooting Guide | Lippert Components
Comprehensive owner's manual and troubleshooting guide for the Lippert Components Schwintek InWall Slideout System. Learn about error codes, manual override, fuse checking, and controller locations.
Preview Lippert RV Entry Door Friction Hinge Kit: Installation and Owner's Manual
A comprehensive guide detailing the installation and operation of the Lippert Components RV Entry Door Friction Hinge Kit. Includes safety precautions, parts list, required resources, step-by-step installation instructions, and template details for aftermarket applications.
Preview Solera Power Awning Owner's Manual | Lippert Components
Comprehensive owner's manual for the Lippert Components Solera Power Awning, covering operation, safety, troubleshooting, and maintenance procedures for RVs.
Preview Lippert SlimRack Auto-Programmable Slide-Out Installation Manual
Comprehensive installation manual for the Lippert SlimRack Auto-Programmable Slide-Out System. Covers component descriptions, safety precautions, installation procedures, electrical connections, programming, operation, and troubleshooting for RV slide-out rooms.