Hoffen Gummy Candy Maker
Model: GCM-2215
Intended Purpose
The Hoffen Gummy Candy Maker is designed for the quick preparation of homemade jelly beans or chocolates. It allows for the easy creation of original, healthy sweets in four different shapes. The device is user-friendly and does not require special qualifications. It is intended for private, indoor use only and not for professional purposes. Following the instructions ensures safe use.
Specifications
Lot No. | POJM220215 |
---|---|
Model | GCM-2215 |
Power supply | 220-240 V~ 50/60 Hz |
Power rating | 40 W |
Safety Instructions
- This appliance can be used by children aged 8 years and older, and by persons with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, if they are supervised or instructed on safe use and understand the associated hazards. Children must not play with the appliance. Cleaning and maintenance by users shall not be performed by children unless they are over 8 years old and supervised.
- Keep the appliance and its cord out of reach of children under 8 years.
- The appliance is not intended to be operated by means of an external timer or separate remote-control system.
- Clean surfaces that come into contact with food according to Chapter 8, 'Cleaning and Care'.
- If the supply cord is damaged, it must be replaced by the manufacturer, its service agent, or similarly qualified persons to avoid a hazard.
- This appliance is intended for household and similar applications, such as: staff kitchen areas in shops, offices, and other working environments; farm houses; by clients in hotels, motels, and other residential environments; bed and breakfast environments.
- When using electrical appliances, basic safety precautions should always be followed.
- Read the entire manual before use.
- Be careful when using the device.
- The device is intended for private indoor use only and should not be used for purposes other than those specified in this manual.
- Do not expose the device to weather conditions (rain, sun, etc.) and do not use it in conditions of increased humidity (bathrooms, damp camping houses).
- Do not use the device near flammable materials.
- To increase safety, do not connect many electric devices to one electric circuit simultaneously. Do not use sockets or plugs with a voltage lower than required to prevent fire and damage to the electrical network.
- For additional protection, it is advisable to install a residual current device (RCD) with a rated residual current not exceeding 30 mA in the electrical circuit. Consult a qualified electrician.
- The appliance is equipped with a short power cord to reduce the risk of entanglement or tripping. Do not let the cord hang over the edge of a table, counter, or touch hot surfaces.
- It is not recommended to use an extension cord or a detachable cord with this unit.
- If a long, detachable power cord or extension cord is used, its marked electrical parameters should be at least as large as the appliance's. The longer cord should be placed so it does not hang over a table-top where it can be pulled by children or cause tripping.
- Place the device on a cool, stable, even surface, away from heating appliances such as electric cookers, gas burners, etc.
- Do not place the appliance on a hot electric plate or a gas burner or in a hot oven.
- Do not leave the appliance unattended while in use or connected to the mains.
- Remove the plug from the socket when not in use and before cleaning.
- The appliance becomes very hot during use and remains hot for some time after being turned off. Do not touch hot surfaces. Wait approximately 20 minutes from turning off the device before cleaning.
- Keep your hands and face away from the vessel where the mixture is heating up.
- Do not put fingers or plastic utensils in the hot mixture.
- Be especially careful when moving the device with the hot mixture.
- To avoid the risk of electric shock, do not immerse the cord, plug, or heating base in water or any other liquid. Do not touch the device with wet hands.
- Do not pour flammable liquids into the containers. Do not place anything other than the intended cooking substance in the appliance.
- Never heat an empty appliance.
- The manufacturer does not recommend the use of accessories other than those delivered with the device.
- Keep the instructions and, if possible, the packaging.
- If the device is passed on to other people, the instruction manual must also be handed over.
- The electronic version of the user manual is available at: http://instrukcje.vershold.com
Explanation of Symbols
- ? Read the instructions.
- ? Indoor use only.
- ◻️ Protection class II: Protection against electric shock is ensured by adequate insulation (double or enhanced), the failure of which is very unlikely.
- ?️ Product approved for contact with food.
- ✅ Product compliant with requirements prescribed in the applicable European Union directives.
- ♻️ Disposal of waste electrical and electronic equipment – see the DISPOSAL section of this manual.
- ? Symbol indicating that the manufacturer has made a financial contribution to the development and operation of a packaging materials recovery and recycling system.
- ? Disconnect the device from the power source.
- ? Designation of the packaging material – corrugated cardboard.
- ♻️ Sort your waste – symbol indicating the necessity to sort waste.
- ?️ Symbol of the relevant waste bin for the box – PAPER.
- ?️ Symbol of the relevant waste bin for the foil – PLASTIC/METAL.
Overview
The Gummy Candy Maker consists of the following parts:
- 1. Dish for dissolving jelly mixture
- 2. Heating base
- 3. On/off switch
- 4. Silicone molds for jelly beans
- 5. Containers/trays for water or ice cubes
(Image description: A red appliance with a central red heating unit. Around the base are four colored sections containing molds in various shapes like hearts, stars, and flowers. The appliance is shown with the molds filled with colorful jelly.)
Package Contents
QTY | Item |
---|---|
1 | Dish for dissolving jelly mixture |
1 | Heating base |
4 | Silicone molds for jelly beans |
4 | Containers/trays for water or ice cubes |
1 | Instruction manual |
Upon opening the packaging, carefully remove the appliance. Ensure the kit is complete and undamaged. Check that plastic parts are not broken and the power cord is not damaged. If any components are missing or damaged, contact the vendor and do not use the appliance. Retain the packaging or dispose of it according to local regulations.
Attention! To keep children safe, do not leave packaging parts (plastic bags, cardboard boxes, expanded polystyrene elements, etc.) freely accessible. Danger of suffocation!
Operation
- Before first use, clean parts that come into contact with food according to Chapter 8, 'Cleaning and Care'. Be careful not to let water enter the heating base, as this will prevent the device from functioning properly.
- Find a dry, heat-resistant, level surface near an electrical outlet.
- Assemble the water/ice cube trays into a full circle and fill them with cold water or ice cubes up to 3/4 of their capacity.
- Place the silicone molds into the trays with water or ice.
- Place the heating base in its position – in the center of the trays circle or any other safe location.
- Put the dish for dissolving the jelly mixture into the heating base.
- Prepare the gelatin mixture in the dish, using your own recipe or the one provided in this manual. Be careful not to overfill the dish; do not exceed the maximum fill level indicated inside. The maximum capacity of the dish is 230 ml.
- Leave the gelatin mixture to swell for approximately 5-10 minutes and add lemon juice.
- Turn the on/off switch to the 'I' position to start heating.
- Stir the mixture carefully and do not let it boil.
- Add sugar as desired (optional) and wait until the mixture is completely smooth. ATTENTION! Water vapor may be released when the mixture is heated. For safety reasons, avoid contact with the steam as it is very hot and can cause burns.
- After about ten minutes, or when the sugar (optional) has dissolved and the mixture is smooth, carefully pour it into the molds through the spout in the dish.
- After filling the molds, turn the device off by setting the on/off switch to the 'O' position and disconnect the device from the power supply by removing the plug from the socket. ATTENTION! Do not pull on the cord! Grab the plug!
- In 60 minutes, the jelly beans will be ready to be removed from the silicone molds.
Recipe for homemade jelly beans:
- 100 ml of any fruit juice
- 6 teaspoons of gelatin
- 1 tablespoon of lemon juice
- 1 tablespoon of sugar (optional)
Pour the gelatin with fruit juice and leave for 5-10 minutes until it is swollen. When the gelatin is swollen, add lemon juice and heat it, stirring, until the gelatin dissolves. Sweeten to taste and mix to dissolve the sugar.
Chocolate pralines:
It is enough to dissolve your preferred chocolate (100 g) and pour it into the molds.
Cleaning and Care
Proper and regular cleaning ensures safe operation and extends the lifespan of the appliance.
Warning! Before performing cleaning and maintenance operations, turn the appliance off, disconnect it from the power source, and let it cool down to avoid burns and electric shock.
Caution! Do not clean the appliance with any strong chemicals, alkali, abrasive, or disinfecting agents, as they may damage the surface of the appliance.
The dish for dissolving the gel mass, silicone trays for jelly beans, and water/ice containers should be washed by hand in warm water with dishwashing liquid. The heating base can be wiped clean with a damp cloth, but ensure the appliance is completely dry before using it again.
Attention! Do not immerse the heater in water or other liquids. Do not put it in the dishwasher.
Repair and Maintenance
The appliance does not contain any user-serviceable parts. Do not attempt to repair the product yourself. Always have the appliance repaired by a professional. Any repairs may only be performed by authorized service points. Incorrectly performed repairs can pose a serious threat to the user.
If the power cord is damaged, it must be replaced by the manufacturer, a service center, or a properly qualified individual to avoid hazard.
Storage and Transportation
It is recommended to store the device in its original packaging. Always keep the appliance in a dry, well-ventilated location inaccessible to children. Protect the appliance against vibration and shock during transport.
Disposal
Keep packaging materials out of children's reach, as they can pose a hazard. Packaging should be disposed of in accordance with local regulations.
Correct disposal of the device:
- According to the WEEE Directive 2012/19/EU, the crossed-out wheeled bin symbol is used to label all electric and electronic devices requiring segregation.
- Do not dispose of the spent product with domestic waste; hand it over to an electric and electronic device collection and recycling center.
- Hazardous components in electronic and electrical equipment have a negative impact on the environment and human health.
- Plastics contained in the device can be recycled in accordance with specific marking. By recycling materials and spent equipment, you help protect the environment.
- Information on electric and electronic devices collection centers is available from local government agencies or the vendor.
CE Declaration of Conformity
This device has been designed, manufactured, and marketed in compliance with the requirements of the New Approach Directives. Therefore, the product has been marked with the CE mark, and a declaration of conformity has been issued for it, which is made available to market regulators.
Warranty
To claim a product, submit the device to the Customer Service Desk at any Biedronka store. For any questions or issues related to product operation or complaint submission, send them to the following e-mail address: infolinia@vershold.com or contact by phone: +48 667 090 903.
Information on repair status can be obtained by contacting the relevant service desk. Warranty and post-warranty service is provided by QUADRA-NET Sp. z o.o. (tel. 61/853 44 44, mobile: 664 44 88 00, email: infolinia@quadra-net.com, www: www.quadra-net.pl).
Your opinion is important to us. Evaluate our product at: www.vershold.com/opinie
Manufacturer (Warrantor): VERSHOLD POLAND Sp. z o.o., Ul. Żwirki i Wigury 16A, 02-092 Warsaw, Poland. Made in China.