RF001 Split Type Smart Toilet Lid
“
Product Information
Specifications
- Model: XYZ123
- Power Supply: 110-240V, 50/60Hz
- Power Consumption: 1000W
- Weight: 5kg
- Dimensions: 30cm x 20cm x 15cm
Product Usage Instructions
Safety Instructions
Before using the product, it is essential to read and adhere to
the safety instructions provided. Failure to do so may result in
injuries or accidents.
Warnings:
- Strictly Prohibited: Enforce compliance with
safety guidelines. - Notice: Disregarding warnings may lead to
injuries.
Guidelines:
Follow these guidelines to ensure safe usage of the product:
- Grounding: Ensure proper grounding for Class I
appliances to prevent electrical leakage. - Power Cord: Replace damaged power cords only
by authorized personnel to avoid danger. - Power Supply: Use only the specified power
supply to prevent overheating or fire hazards.
Installation and Usage
Follow these steps for proper installation and usage of the
product:
Installation Steps:
- Place the product on a stable surface near a power outlet.
- Ensure proper grounding if required.
- Connect the power cord to the designated power supply.
Cleaning and Maintenance:
Regularly clean the product using a damp cloth. Ensure the
product is unplugged before cleaning to prevent electric shock.
Troubleshooting:
If you encounter any issues with the product, refer to the
troubleshooting section in the manual or contact customer support
for assistance.
FAQ (Frequently Asked Questions)
Q: Can the product be used with an extension cord?
A: It is recommended to connect the product directly to a power
outlet to avoid potential hazards.
Q: How often should the product be cleaned?
A: Regular cleaning is recommended, at least once a month, to
ensure optimal performance and longevity of the product.
Q: What should I do if the product malfunctions?
A: Refer to the troubleshooting section in the manual for common
issues. If problems persist, contact customer support for further
assistance.
“`
5)H[SRVXUHVWDWHPHQW
7KLVHTXLSPHQWFRPSOLHVZLWKWKH)&&UDGLDWLRQH[SRVXUH OLPLWVVHWIRUWKIRUDQXQFRQWUROOHGHQYLURQPHQW7KLV WUDQVPLWWHUPXVWQRWEHFRORFDWHGRURSHUDWLQJLQ FRQMXQFWLRQZLWKDQRWKHUDQWHQQDRUWUDQVPLWWHU
)&&:DUQLQJ
7KLVGHYLFHFRPSOLHVZLWK3DUWRIWKH)&&5XOHV 2SHUDWLRQLVVXEMHFWWRWKHIROORZLQJWZRFRQGLWLRQV 7KLVGHYLFHPDQRWFDXVHKDUPIXOLQWHUIHUHQFHDQG WKLVGHYLFHPXVWDFFHSWDQLQWHUIHUHQFHUHFHLYHG LQFOXGLQJLQWHUIHUHQFHWKDWPDFDXVHXQGHVLUHG RSHUDWLRQ
1RWH7KLVHTXLSPHQWKDVEHHQWHVWHGDQGIRXQGWR
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³5HRULHQWRUUHORFDWHWKHUHFHLYLQJDQWHQQD ³,QFUHDVHWKHVHSDUDWLRQEHWZHHQWKHHTXLSPHQWDQG UHFHLYHU ³&RQQHFWWKHHTXLSPHQWLQWRDQRXWOHWRQDFLUFXLW GLHUHQWIURPWKDWWRZKLFKWKHUHFHLYHULVFRQQHFWHG ³&RQVXOWWKHGHDOHURUDQH[SHULHQFHGUDGLR79WHFKQLFLDQ IRUKHOS
127($QFKDQJHVRUPRGL¿FDWLRQVWRWKLVXQLWQRW
H[SUHVVODSSURYHGEWKHSDUWUHVSRQVLEOHIRU FRPSOLDQFHFRXOGYRLGWKHXVHU
VDXWKRULWWRRSHUDWH WKHHTXLSPHQW
Contents page
Safety Instructions Product Description Component Description
Installation Steps Remote Control Instructions Function Description
Cleaning and Maintenance Troubleshooting Product Dimension Drawings Technical Specifications Warranty Card
Before use
Installation and Usage
Before use
Safety Instructions
Before use, please read through the safety instructions carefully so that you can use the product correctly. Pay attention to the following warnings, which are related to safety
Warning
Strictly prohibited
Enforce compliance
Notice
If the above warning signs are disregarded, injuries or life-threatening injuries may occur.
Unsupervised use of this equipment is prohibited for persons (including children) with physical, sensory, or mental impairments or lack of experience and common sense due to limited cognitive abilities and/or lack of necessary knowledge. Unless they are supervised or instructed in using the product by a person responsible for their safety. Unsupervised children should not use the appliance alone and ensure that children do not play with it.
warn
Do not splash the product with water May cause fire or electric shock Grounding
Grounding Class I appliances must be connected to a ground wire. Failure to do so may result in product malfunction or electrical leakage
Guidelines to be followed compulsorily
If the power cord is damaged, it must be replaced by the manufacturer or its service department or similarly specialized personnel in order to avoid danger.
Safety instructions
Safety instructions
Only suitable for the power supply required in the technical specifications, it is strictly prohibited to use too many loads on the same socket.
May overheat or cause fire
Ensure that the power plug is not wet with water, detergent or urine.
May cause fire or electric shock
Do not disassemble, repair or modify the product by yourself
May cause fire or electric shock
Unplug the product when cleaning.
May cause electric shock
Do not pull/tug on the power plug / cord.
May cause fire or electric shock
Do not use loose sockets
May cause fire or electric shock
Do not plug/unplug the power cord with wet hands.
May cause electric shock
Do not connect to water pipes other than the mains.
May cause skin infection or product failure
Do not place lighted cigarettes or other combustibles nearthe product.
May cause fire
Do not bend or twist the water supply hose.
May cause water leakage
Do not place heavy objects on the toilet seat or lid
May damage product
Do not turn the product upside down
May damage product
Please use diluted kitchen cleaner for cleaning, do not use the following items: Benzene, paint thinner, stain remover, nylon brushes, etc.
Safety instructions
Product Description
Do not place this product in direct sunlight.
It may cause discoloration of the product and failure of the seat heating function.
The room temperature in the bathroom should be above 0° C.
Otherwise the product may freeze. Use a heater or other means to raise the bathroom temperature.
Do not pour urine on the body and nozzle.
May cause clogging
Do not use a non-compliant power supply
May cause product malfunction
Do not lean on the lid when in use
May damage the
Unplug the product from the mains when there is thunder or lightning. Otherwise, it may cause product malfunction or product damage
When not in use for a long period of time, empty the stored water and unplug the product. Otherwise, it may cause water contamination and skin infection.
Toilet Lid Digital Screen Toilet seat Night lamp 2 Nozzle
Night lamp
Water/Seat Temperature Adjustment Buttons Buttons Water inlet hose connection
Component Description
1. Toilet lid
Installation steps
Installation tools (bring your own)
2. Fixed part
Connecting bolt
Adjustment plastic seat
Fixed plate
Expansion nut
3. Tee connector 4. Water inlet hose 5. Remote control
6. Instruction
Split-type smart toilet lid Instructions
Filter screen
Remote Remote control control bracket
7. Certificate of Conformity
Phillips screwdriver
Movable wrench
Precautions before installation
Bucket and rag
Power pliers
Attention
1. Water pressure range: 0.1-0.75MPa, please follow the instructions. 2. The angle valve should be close to the position where this product is installed and removed. 3. Please use the new braided hose that comes with the product, the old braided hose cannot be used to prevent water leakage. 4. When installing the braided hose, be careful to prevent the black gasket inside from falling out.
Installation Steps
1. Remove the old cover plate
2. Place the installation template on the ceramic, taking care to align it with the front edge of the toilet
Rayon Adjust the plastic seat Fixing plate Expansion Nut
4. Disassemble the keypad
1 Plug the expansion nut into the ceramic hole.
2 Place the fixing plate in the notched part of the mounting template.
3 Place the adjustable plastic seat in the mounting groove.
4 Place the adjustable plastic seat in the mounting slot.
5 Place the screws in the expansion nut holes and tighten them
5. Push the cover plate in the direction shown in the figure until you hear the Push in the cover plate in the direction shown in the figure until you hear a “click” sound, indicating that it is installed in place
Disassembly key
Installation procedure
6. Close the Triangle valve
7. Braided hose installation
Straight-sided toilet
Straight end connection
1
When the ceramic shape is similar to Figure 3, we recommend that the elbow end of the braided hose be connected to the electronic cover plate.
Fig. 3 hemmed toilet
Figure 4 Elbow Connection
2 When the ceramic shape is similar to Fig. 3, we recommend connecting the elbow end of the braided hose to the electronic cover.
8. Installation procedure T – shaped
Toilet inlet valve
Colorful braided hose
Tee Connector Angle valve
Normally the tee can be installed on the angle valve
Toilet inlet valve
Tee Connector
Braided hose Angle Valve
When the angle valve is too close to the wall to be mounted, the tee can be mounted below the toilet tank inlet.
Installation procedure
9. Open the angle valve and check whether there is water leakage.
10. Hold the sensing area of the seat ring with your right hand, and turn on the knob with your left hand to check whether the spray pipe extends. Pay attention to blocking the sprayed water with your hand to prevent it from splashing.
11. Connect to the power supply.
Notice
Strictly prohibited
It is strictly prohibited! Make sure to turn on the angle valve first and then connect to the power supply so as to protect the heating device.
1. It is strictly prohibited to move the product from the toilet lid part, as it may easily cause mechanical failures.
2. It is strictly prohibited to connect hot water higher than 40°C and cold water that may freeze.
Auto Cleaning Button This button can realize the functions of buttocks washing/ drying and female washing/moving.
Female Washing/Moving Button It is used for female washing and moving the female washing function.
Cleaning Intensity Adjustment/ Nozzle Position Adjust the cleaning intensity of buttocks washing and female washing. The nozzle position has 4 adjustable gears.
Manual Cleaning Button Turn on or off the manual wash functions.
Power Saving Mode Button Turn on or off the Power Saving Mode.
CLEAN ECO
Remote Control instruction
Night Light Buttor Turn on or off the night light functions.
Buttocks Washing/Moving Button It is used for buttocks washing and moving the buttocks washing function.
Warm Air Drying Button It makes the washed part dry with warm air.
Stop Button Stop buttocks washing and female washing. Stop warm air drying.
Water Temperature/Seat Temperature/ Air Temperature Button Adjust the water temperature during cleaning. The seat temperature button adjusts the temperature of the seat ring. The air temperature button can adjust the temperature of the warm air.
Auto Button
1. Auto Button
AUTO
1. Sit on the seat, press the “Auto” button to activate the one-touch automatic function. The toilet will automatically perform the hip wash, followed by the mobile wash, and finally dry the area.
2. Rear/Female/Move
REAR/MOVE FEMININE/MOVE
1. Sit on the seat, press the “REAR/MOVE” button. The toilet will automatically wash the hip area or perform the mobile cleaning function after use.
2. Female Wash / Move Wash Sit on the seat, press the “Female Wash / Move” button. This function is specifically for women and will automatically clean the lower body or perform mobile washing.
3. Function Duration These functions can be used for up to 2 minutes. If you want to continue, press the function button again. Hip wash and female wash can be switched between.
4. Additional Functionality Other function buttons can be used in conjunction with these functions.
5. Automatic Stop When the user leaves the seat, the rear wash / female wash function will automatically stop working.
3. Drying function
Drying Function**
1. Sit on the seat, press the “Dry” button, and the drying fan
will blow warm air to dry the hip area.
2. When using the drying function, press the “Wind Temperature”
button to display the current wind temperature level. You can adjust
the drying temperature by pressing the wind temperature button to
Drying
cycle through four settings. The fan will default to the last used setting.
3. The drying function can be used for up to 3 minutes. It will
automatically stop after 3 minutes or when the user leaves the seat.
**Note:** In winter or if there are a lot of water droplets, you can first
press the hip area with a small tissue for faster drying.
4. Water pressure adjustment – sprinkler position
4. **Water Pressure / Nozzle Position Adjustment / Stop**
1. Sit on the seat, press the “REAR/MOVE” function, then press the
“Water Temperature” button. The display on the back lid will show the
current water pressure level. You can adjust the water pressure by pressing
the “+” or “-” buttons. There are four levels of water pressure.
2. The product’s water inlet is equipped with a filter. If it is clogged by debris,
Stop
it will affect water pressure. Please regularly unscrew the filter and clean it
(refer to the “Cleaning and Maintenance” section).
3. Sit on the seat and use the rear wash or female wash function. Press the
“<” or “>” button to adjust the nozzle’s front-and-back position. There are
four adjustment levels.
4. When using the rear wash / female wash function, press the “Move” button
to activate the automatic back-and-forth cleaning, increasing the cleaning
area and comfort. After cleaning, the nozzle will automatically retract.
5. When using the rear wash / female wash function again, the water pressure
and nozzle position will default to the settings from the last use.
6. Sit on the seat, press the “Stop” button, and the automatic cleaning,
rear wash, female wash, and drying functions will stop working.
Function Description
5. Function Description
CLEAN ECO
Manual Cleaning: When the manual cleaning button is pressed without the seat in place, the spray bar will extend and stay in place for 3 minutes. When the stop button is pressed (or the timing is up), the spray bar will automatically retract and clean itself. Power Saving Button: The beeping sound when starting the power saving mode is a short beep, and the sitting temperature is controlled at about 31°C; when a person sits on the seat, the power saving mode will end, and when a person leaves the seat, the power saving mode will start automatically.
6. Night Light
CLEAN ECO
Press the night light button briefly to turn off the night light function. The night light is enabled by default. Press the button again to turn on the night light.
7. Water Temperature/Seat Temperature/Drying Temperature Button
CLEAN ECO
1. When seated, press the rear wash/move function button, then press the water temperature button. The rear display screen will show the current water temperature, which will correspond to the previously set level. The water heating function will automatically activate. If the water temperature displays “0,” the water is at room temperature, and heating is off. 2. Press the water temperature button to cycle through four levels. The indicator lights will display: Room Temperature, Low (36°C), Medium (38°C), and High (40°C). 3. When seated, press the seat temperature button. The rear display screen will show the current seat temperature, corresponding to the previously set level. The seat heating function will automatically activate. If the seat temperature displays “0,” the seat is at room temperature, and heating is off. 4. Press the seat temperature button to cycle through four levels. The indicator lights will display: Room Temperature, Low (32°C), Medium (35°C), and High (38°C). 5. When seated, press the drying button. The rear display screen will show the current drying air temperature, corresponding to the previously set level. The drying function will automatically activate. If the air temperature displays “0,” the drying air is at room temperature, and heating is off. 6. Press the drying temperature button to cycle through four levels. The indicator lights will display: Room Temperature, Low (32°C), Medium (35°C), and High (38°C).
8. Smart Toilet Body Knob/Water Temperature/Seat Temperature
Water Temperature
Seat Temperat
1. When seated, rotate the knob forward to activate the female cleaning function, which automatically washes the lower body. 2. Rotate the knob backward when seated. 3. Press the knob once to stop rear wash, female wash, or drying functions. Press the knob again to activate the drying function. Temperature Levels: – Water Temperature Settings: Room Temperature, Low (36°C), Medium (38°C), High (40°C) – Seat Temperature Settings: Room Temperature, Low (32°C), Medium (35°C), High (38°C)
Cleaning and Maintenance
Manual cleaning of the spray nozzle
When there is no one seated, press the “Clean” button on the remote control for 3 seconds. Then the spray bar will automatically extend for manual cleaning. After pressing the stop button, the spray bar will retract and return to its original position.
Cleaning the filter screen
Warm Tips: · When the water flow is smaller than usual, please clean the filter screen. · Please disconnect the power supply and turn off the angle valve before cleaning the filter screen. · The filter screen is installed at one end of the braided hose. · After cleaning with a small brush, please reinstall the filter screen into the nut of the hose.
Cleaning the product surface
Note: Please disconnect the power supply before cleaning! · Please use a sponge or soft cloth dipped in normal temperature water or neutral detergent to wipe the surface of the product. · When using detergent to clean other parts, please lift the upper cover and the seat ring. · Do not put the cover back on until the detergent in the ceramic toilet has been completely rinsed off, otherwise the evaporation of the detergent may corrode the surface.
Earth leakage protector
Please check the earth leakage protector regularly, at least once a month. Inspection methods: · Press the reset button of the earth leakage protector, and the indicator light will turn on and the power will be connected. · Press the “Test” button of the earth leakage protector, and the indicator light will go out and the power will be disconnected. If there are any problems during the inspection process, please immediately stop using the product and contact the local supplier or call the service hotline to replace the earth leakage protector. Please ensure that the indicator light of the earth leakage protector is always on when the product is in operation. If an earth leakage protector has already been installed in the existing circuit, please check it according to the above methods.
Schematic diagram of the earth leakage protector
Light
Note:
RESET
When the temperature in the bathroom is lower than 0 °C
or the product is not used for a long time:
TEST
· Please unplug the power plug and turn off the angle valve to stop the water inlet.
· Remove the water inlet hose and drain the water in the water inlet hose.
Troubleshooting and Solutions
Troubleshooting for Fault Causes
Before checking whether it’s a product malfunction, please confirm the following items first:
Check the Power Supply Is the power supply working properly?
Check the Water Supply Is the water supply normal? Is the angle valve closed?
If the following phenomena occur, please immediately cut off the power supply and contact the after-sales service.
The earth leakage protector trips frequently.
Note: When there is a large amount of water leakage not from the water outlet, please close the angle valve and cut off the power supply at the same time.
Analysis of Cleaning Faults
Phenomenon
No water comes out after turning on the flushing knob.
Possible Reasons
The inlet hose is bent, resulting in blockage.
The self-cleaning nozzle needs to be cleaned before cleaning.
Not sitting in the seat ring sensing area
After turning on the knob, the spray rod doesn’t extend.
After turning on the knob, the spray rod doesn’t extend and a large amount of water flows into the toilet.
The water temperature is abnormal and the product has over-temperature protection.
The temperature sensor is abnormal. When the product is used in an environment without separation of wet and dry areas or when water vapor enters the inside of the product during cleaning, resulting in a temporary short circuit.
The water pressure in the pipeline is abnormal and the product activates the pressure relief mode.
The water pressure is normal, but the amount of cleaning water is very small and the cleaning power is weak.
There are impurities in the water, and the filter screen is blocked after a period of use.
When the spray rod can extend normally for cleaning, there is no warm water.
The seat ring heating function is turned off.
The over-temperature protector of the product is disconnected and needs to be reset.
Solutions
Close the angle valve and reinstall the inlet hose.
Wait for a few seconds and then normal cleaning can be carried out.
Sit in the sensing area of the seat ring (there will be a beeping sound as a prompt), and then turn on the knob again to carry out normal flushing.
Unplug the power plug, reconnect the power after 5 seconds, and the product will return to normal use after resetting.
Please place the product in a dry environment for 1 – 2 days, reconnect the power and it can return to normal use. If the fault still exists, please contact the after-sales service for repair or replacement.
Please close the angle valve, remove the hose, check whether there are foreign objects in the filter screen at the water inlet of the product, reinstall the hose, open the angle valve, and then turn the knob to the maximum, and normal use can be restored.
Please clean the filter screen of the hose and the filter screen at the water inlet of the product according to the relevant maintenance content in the instruction manual.
Turn on the water temperature function through the side button.
Unplug the power plug, reconnect the power after 5 minutes, and the product will return to normal use after resetting. If the fault still exists, please contact the after-sales service for repair or replacement.
Troubleshooting for Seat Ring Heating Faults
Phenomenon
The temperature of the seat ring is too low when first touching it.
The temperature of the seat ring drops during cleaning.
Possible Reasons
The seat ring heating function is turned off.
The product has activated the low-temperature anti-scalding function.
Solutions
Turn on the seat ring heating function in advance.
After the cleaning is finished, the temperature of the seat ring will rise again.
Malfunctions and Solutions
Analysis of Lighting Malfunctions Phenomena
Phenomena The toilet pit light is not on.
The knob light is turned off or malfunctioning.
Possible Reasons
The toilet pit light is turned off or malfunctioning.
The knob light is turned off or malfunctioning
Reconnect the power supply. If the malfunction still persists, please contact the after-sales service for replacement.
Product Dimension Diagrams
Product Dimension Diagrams
Unit: mm
Documents / Resources
 |
Lxlu RF001 Split Type Smart Toilet Lid [pdf] Instruction Manual 2BPE9-RF001, 2BPE9RF001, rf001, RF001 Split Type Smart Toilet Lid, RF001, Split Type Smart Toilet Lid, Smart Toilet Lid, Toilet Lid, Lid |