LUXPRO LP1100V2 High-Output Universal Large Flashlight User Manual
Features
Durable aluminum construction
Long range LPE Optics
Heavy duty flashlight
TackGrip molded rubber grip
Ergonomic side button
O-ring sealed, IPX6
LP1100V2
3 Modes: High/Low/Strobe
Operation Instructions
On/Off: Press and release button.
Cycle modes: From High mode, press button to cycle through modes (High/Low/Strobe).
Automatically resets to High mode when off for longer than 2 seconds.
Usage and Maintenance
Battery Replacement: In a dry environment, unscrew the tailcap by turning counter clockwise. Remove batteries.
Insert the new batteries into the tube (+) end first. Carefully reinstall the tailcap by pressing lightly while turning clockwise.
Care Instructions: If you know it’s going to be a while between uses, we suggest removing batteries from your light and storing your gear in a dry, protected place.
ANSI/PLATO FL1 STANDARD
| MODES |  LUMENS |
 RUN TIME |
 BEAM DISTANCE |
| High | 360 lm | 7h | 270 m |
| Low | 120 lm | 15h | 100 m |
| Strobe | 360 lm |
Product Warranty
Limited Lifetime Warranty against manufacturer’s defects. For warranty claims contact LuxPro by calling 801-553-8886 or sending an email to info@simpleproducts.com.
luxpro.com
866.553.8886
14725 S Porter Rockwell Blvd Ste C
Bluffdale, UT 84065
Documents / Resources
 |
LUXPRO LP1100V2 High-Output Universal Large Flashlight [pdf] User Manual LP1100V2, High-Output Universal Large Flashlight, LP1100V2 High-Output Universal Large Flashlight |
 |
LUXPRO LP1100V2 High-Output Universal Large Flashlight [pdf] User Manual LP1100V2 High-Output Universal Large Flashlight, LP1100V2, High-Output Universal Large Flashlight, Universal Large Flashlight, Large Large Flashlight, Flashlight |
