LUXPRO LP1100BL High-Output Universal Large Flashlight
Features
- Durable aluminum construction
- Long range LPE Optics
- Rubber grip
- Heavy duty flashlight
- Ergonomic side button
- O-ring sealed, IPX5
- 3 Modes: High/Low/Strobe
Operation Instructions
- On/Off: Press and release button.
- Cycle modes: From High mode, half-press button to cycle through modes (High/Low/Strobe).
- Automatically resets to High mode when off for longer than 5 seconds.
Usage and Maintenance
Battery Replacement: In a dry environment, unscrew the tailcap by turning counter clockwise. Remove batteries. Insert the new batteries into the tube (+) end first. Carefully reinstall the tailcap by pressing lightly while turning clockwise.
Care Instructions: If you know it’s going to be a while between uses, we suggest removing batteries from your light and storing your gear in a dry, protected place.
Product Warranty
Limited Lifetime Warranty against manufacturer’s defects. For warranty claims contact LuxPro by calling 801-553-8886 or sending an email to info@simpleprod-ucts.com.
luxpro.com
866.553.8886
14725 S Porter Rockwell Blvd Ste C Bluffdale, UT 84065
Documents / Resources
 |
LUXPRO LP1100BL High-Output Universal Large Flashlight [pdf] User Manual LP1100BL, High-Output Universal Large Flashlight, LP1100BL High-Output Universal Large Flashlight |
