LPCB CSB-803 Resettable Call Point

Features

1. The default green color, it could be customized with other colors.
2. Resettable design, obvious indicators around the edges of the unit.
3. Press the pressing plate to enable the output function.
4. Pressing plate with status shown.
5. Reversionary key with non-slip design.
6. Built-in buzzer status to set as a silent or continuous beep. Volume is adjustable.
7. The input power range is DC12~24V. It can connect with all types of fire alarm systems.
8. Easy to assemble, 3 sets of output points to connect other equipment embedded or surface installations to select.

Accessories

Specification

Items	Specification	Note
Power supply	DC 12V-DC 24V	±10%
Operation current	DC12V/20mA Standby/ 40mA Operation	±10%
	DC24V/20mA Standby/ 40mA Operation	±10%
Buzzer	Set as silent or continuous beep
Indicator	Dual-color (red and green). Red indicator to set blinking or on.
Output	Triple NO/NC/COM output
Weight	167g
Dimensions	90mm(L)x95mm(W)x45mm(H)
Material	ABS, PC(transparent part)

Standby

Operation

Connections

Wiring Diagram

Attention before installation

Please press the pressing plate to make sure the states turn red before opening the front and middle covers to prevent the spring being popped out

Installation

Installations for user

Installation steps

1. Unscrew the screws to remove the fasteners on B and C
2. Fix bottom cover C and connect the wires
3. Fastening the unit as in the diagram shown above locks the screw at the bottom
4. Insert the key into the key hole Pull the key out when the states turn green to complete the setting

Documents / Resources

LPCB CSB-803 Resettable Call Point [pdf] Installation Guide CSB-803, CSB-803 Resettable Call Point, Resettable Call Point, Call Point, Point

References

• User Manual