Lowes Drawer kit

How to remove the drawer

1. Full pull out the drawer.
2. Pull out the plastic latch at the bottom of the guide rail and loosen the power screw at the bottom of the guide rail.
3. Finally pull out the drawer.

Top Picks

• RELIABILT White Plastic Drawer Guide Kit
  Includes two template guides and four corner guides, allowing adjustability for custom drawer installations.

• Prime-Line Brown Plastic Drawer Guide Kit
  Features two brown plastic track case guides, four white corner glides, ring shank nails, and screws. Designed for tracks measuring 1/4″ x 7/8″.

• Prime-Line White Plastic Drawer Guide Kit
  Comes with two white plastic track case guides and four white corner glides, suitable for tracks measuring 3/32″ x 1-1/4″.

Tools & Materials You’ll Need

• Screwdriver or drill with screwdriver bits
• Tape measure
• Level
• Pencil or marker
• Screws (often included in the kit)
• Optional: Wood glue for added stability

Step 1: Measure Your Drawer and Cabinet

1. Drawer Dimensions: Measure the width, depth, and height of your drawer to ensure the guides will fit properly.
2. Cabinet Opening: Measure the interior width and depth of the cabinet where the drawer will slide in.

Step 2: Prepare the Drawer

1. Remove Existing Hardware: If you’re replacing old guides, remove them carefully.
2. Clean the Surface: Ensure the back of the drawer is clean and smooth for optimal guide attachment.

Step 3: Install the Drawer Guides

1. Position the Guides: Place the guide assemblies on the back corners of the drawer.
2. Align the Guides: Use a level to ensure the guides are straight and properly aligned.
3. Attach the Guides: Secure the guides to the drawer using the screws provided in the kit.

Step 4: Install the Corner Guides

• Place the Corner Guides: Position the corner guides inside the cabinet at the back corners.
• Secure the Guides: Attach the corner guides to the cabinet using the screws provided.

Step 5: Test the Drawer

• Insert the Drawer: Place the drawer into the cabinet, ensuring the guides align with the corner guides.
• Check Movement: Open and close the drawer several times to ensure smooth operation.
• Adjust if Necessary: If the drawer sticks or doesn’t slide smoothly, adjust the guides or corner guides as needed.

FAQs

Documents / Resources

Lowes Drawer System [pdf] Installation Guide Drawer System, Drawer, System

References

• User Manual