Loop Quiet 2 Ear Plugs User Manual

Loop Quiet 2 Ear Plugs

How to

Insert your EARPLUGS

• Insert the earplug with two fingers
• Twist to the back until it sits at the base of your ear comfortably
• The earplugs shouldn’t stick out or be  visible from the front

INSERTLOOP DREAM

• Pull the back of your ear
• Insert the ear tip into your ear (no need to twist)
• Gently press for 5 seconds to create a good seal
• Earplugs shouldn’t stick out or be visible from the front

INSERIKIDSEARPIUGS

• Pop the ear tip in and twist the earplug back
• Give them a wiggle to make sure they’re comfy and secure
  Ensure they don’t stick out and aren’t visible from the front

FIND YOUR PERFECT SIZE

• Try all ear tip sizes to find your perfect fit
• If they don’t feel secure, try a size up
• If they stick out or cause discomfort, try a smaller size
• Left and right tip sizes can differ
• Hearing yourself talk more loudly is a sign of a good seal

CHANGE EAR TIPS

1. Gently pull off the ear tip
2. Align and push until it pops into place

Trouble attaching the ear tip? Turn it inside out, push it onto the earplug and fold back into place.

CHANCE LOOP DREAMERIPS

1. Gently squeeze the tip and pull to remove
2. Align over stem with oval ear tip opening
3. Push the tip into the earplug
   Make sure the ear tip is fully attached to the earplug so it doesn’t come apart when pulled
   If it doesn’t slide on easily or feels forced, double-check it’s in position
   If the foam bulges out, unroll the silicone layer and roll it back over again

CLEAN YOUR EARPLUGS

• Gently pull of the ear tip (don’t separate the foam tip from the silicone layer)
• Wipe the ear tip and earplug with adamp soft cloth and soapy water
• Wait until your ear tips are completely dry, then reattach to your earplugs
• Do not submerge entire earplug body into water.
• Instead, clean with a damp cloth.
• Do not use any harsh chemicals or sharp objects.
• Keep away from dust and sand pollution.

CLEAN LOOP DREAM

• Gently pull of the ear tip (don’t separate the foam tip from the silicone layer)
• Wipe the ear tip and earplug with a damp soft cloth and soapy water
• Wait until your ear tips are completely dry, then reattach to your earplugs
• Do not submerge entire earplug body into water.
• Instead, clean with a damp cloth
• Do not use any harsh chemicals or sharp objects.
• Keep away from dust and sand pollution.

INSERT LOOP MUTE

• Loop Experience Plus and Engage Plus come With an extra accessory called Loop Mute.
• Mute gives you extra noise reduction on demand for life’s louder moments.
• To insert, simply line up the smaller side of the Mute with the inside of your earplug and push
• Mute should sit flush inside the inner part of your Loop earplug and not stick out

SWITCH MODES

Slide the dial up or down while Loop Switch is in your ear to select your preferred noise reduction mode.
Choose Quiet Mode for maximum noise reduction, Engage Mode for socializing and Experience Mode for live music and events.

STORE YOUR EARPLUGS

Place your earplugs in the included Carry Case and attach them somewhere safe for easy access at home or on the go.
For Loop Dream, simply place them in the bedside Carry Case upon waking.